I have been thinking of getting a pair of Wheel Vintiques 15x6 reproduction rally wheels and I haven't been able to find anyone who sells polished trim rings for a 15x6 wheel. I don't see why WV would sell the wheels in that size and not offer a trim ring for it. Does anyone know of a source for a correct looking trim ring for a 15x6 wheel?

Check Coker tire.

Not that I know of , that is why is is kinda stupid to offer them and have no trim ring.
You should just find some orginal 15 x 6.5 ralley wheels , at least you can find some trim rings for those....

Just me

I would but I need small bolt pattern.

Mopar Performance has re-released them, in polished finish only PN# P5153310,.......I'd recommend Mancini Racing, rather than a local dealer for purchase,....Mancini has them at $88 each


Mike

Did the factory ever make a 15x6" rallye wheel? I always thought the 15" wheels were either 7" wide or 6.5" that came on the late 70's cars?????

That's correct, no 6", only 6.5" (newer) and 7" (older).
The 6.5" has the same backspace, 4.25", as the 7", the .5" of width is taken from the outside, so the correct trim rings are different, there's a .5" gap when using the 6.5" on a 7" wheel. To confuse the rings more, Mopar used the same part # for the 6.5" rings when they came out and quit making the correct ones for the 7" (until recently), so you have to double check which is which when buying some of the older stock.

We have one set left and that's it.

Mopar will never make these again because they had to modify the tooling inorder to make 15" X 7" trims rings.

Give us call.

Thanks.

Mancini Racing
800-843-2821
www.manciniracing.com