GOODMARK CUDA FENDERS - Moparts Forums

Register Log In Moparts Forums Moparts Restoration & A12 Forum GOODMARK CUDA FENDERS

Print Thread

Page 4 of 4

1

2

3

4

Re: GOODMARK CUDA FENDERS [Re: toplescuda] #47982 06/06/09 06:51 PM 06/06/09 06:51 PM
Joined: Sep 2008 Posts: 4 new market tennessee D don bettis member
don bettis member D Joined: Sep 2008 Posts: 4 new market tennessee	AMD has been two monthing me to death for almost 2 years on the 71 valance and the 71 fender. I found and oem f/valance and Goodmark gilled fenders. As with 90% of all repo sheetmetal yougattaworkit. Every thing seems to be ok so far. Im changing my 73 barracuda to a 71 440 Cuda. Don PS: Who knows who is stamping them for goodmark. AMD is stamping in China too but I've heard better things from them and the TECH support has been good

Re: GOODMARK CUDA FENDERS [Re: don bettis] #47983 06/07/09 09:46 AM 06/07/09 09:46 AM
Joined: Nov 2005 Posts: 322 MERRILLVILLE, INDIANA S sunroof446 enthusiast
sunroof446 enthusiast S Joined: Nov 2005 Posts: 322 MERRILLVILLE, INDIANA	I Installed a goodmark left front fender on a 70 CUDA. Who ever buys theese fenders should also buy a reaming tool your gonna need it. I had to ream the two bottom holes straight up & it still was not enough. Had to ream holes on the rocker straight down. I also had problems with the stud that goes thru the cowl bracket I could not use the nut with the big washer. not enough room. $600.00 I Would have rather spent that on an original fender with dents at least it would have fit properly.

Re: GOODMARK CUDA FENDERS [Re: sunroof446] #47984 06/07/09 09:59 AM 06/07/09 09:59 AM
Joined: Nov 2005 Posts: 15,119 85086 moparpollack Lil Herman
moparpollack Lil Herman Joined: Nov 2005 Posts: 15,119 85086	Dogpile on Goodmark's poor quality. My Dart quarter was so thin it oil canned and was just a disappointment. I cannot wait for AMD to come out with full quarters for the 70-73 Dart. 56 Plaza 63 D100 step side 67 Coronet, 68 Roadrunner, 69 Super Bees, 69 Coronet 500 convertible, 70 Roadrunner Post, 79 D150 360, and a severe case of Mopar a,d,d

Re: GOODMARK CUDA FENDERS [Re: moparpollack] #47985 06/08/09 10:43 AM 06/08/09 10:43 AM
Joined: Feb 2004 Posts: 936 O OLD318 super stock
OLD318 super stock O Joined: Feb 2004 Posts: 936	Just about anything sheetmetal wise that GOODMARK reproduces is NOT going to be the original thickness. This is not OEM tooling with OEM grade sheetmetal. This is reproduction tooling for use with thinner automotive grade steel.... Lets give GOODMARK some credit... They started this whole OEM quarter panel stuff. AMD has certainly done an excellent job but they were not the first to come out with it. Don't knock it to hard. I'll take a goodmark quarter or fender over the repro skins from shermans any day of the week...

Re: GOODMARK CUDA FENDERS [Re: OLD318] #47986 06/08/09 05:07 PM 06/08/09 05:07 PM
Joined: Dec 2007 Posts: 18,157 Mass DAYCLONA I Live Here
DAYCLONA I Live Here Joined: Dec 2007 Posts: 18,157 Mass	Quote: Just about anything sheetmetal wise that GOODMARK reproduces is NOT going to be the original thickness. This is not OEM tooling with OEM grade sheetmetal. This is reproduction tooling for use with thinner automotive grade steel.... Lets give GOODMARK some credit... They started this whole OEM quarter panel stuff. AMD has certainly done an excellent job but they were not the first to come out with it. Don't knock it to hard. I'll take a goodmark quarter or fender over the repro skins from shermans any day of the week... Mark that owns and operates AMD,.....was "part" of Goodmark for a good number of years,....he took his own show on the road, if he hadn't you wouldn't see none of the offerings currently avaliable,

Page 4 of 4

1

2

3

4

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1