Re: Post up your oil choice!!!
[Re: MegaDart]
#451376
08/27/09 02:13 PM
08/27/09 02:13 PM
|
Joined: Jun 2009
Posts: 705 Michigan
Hemiroid
super stock
|
super stock
Joined: Jun 2009
Posts: 705
Michigan
|
Quote:
valvoline VR1 20w50.
with 1/2qt of Lucas oil stabilizer
I alterate between that and Rotella.
|
|
|
Re: Post up your oil choice!!!
[Re: 408Dust]
#451380
08/27/09 03:42 PM
08/27/09 03:42 PM
|
Joined: Jun 2009
Posts: 877 ky
68roadrunner
super stock
|
super stock
Joined: Jun 2009
Posts: 877
ky
|
Quote:
Valvoline VR1 40W.
x2
|
|
|
Re: Post up your oil choice!!!
[Re: moparmattkos]
#451383
08/27/09 04:04 PM
08/27/09 04:04 PM
|
Joined: May 2006
Posts: 740 WA
JD Dart
super stock
|
super stock
Joined: May 2006
Posts: 740
WA
|
Brad Penn 20-50 for me. I was using redline 10-40 never again rod bearings looked terrible mains were ok. Been building engines for local racers here. One customer was using Brad Penn 20-50 oil when we torn him down for a freshen up all the bearings look like we just put them in I was sold on Brad Penn after that. Used valvoline racing oil in the old days no issues bearings looked good but that was in the 80’s before the EPA made the oil companies to reduce zinc content.
best so far 8.53 @ 158.59 MPH 60'1.240
|
|
|
Re: Post up your oil choice!!!
[Re: 64Post]
#451386
08/27/09 05:06 PM
08/27/09 05:06 PM
|
Anonymous
Unregistered
|
Anonymous
Unregistered
|
valvoline VR1 20W-50 in the summer, Rottela T 15W-40 in the spring and fall
|
|
|
Re: Post up your oil choice!!!
[Re: maximum entropy]
#451391
08/27/09 05:57 PM
08/27/09 05:57 PM
|
Joined: Apr 2003
Posts: 1,613 Burlington,Ont.
77DragracerR/T
top fuel
|
top fuel
Joined: Apr 2003
Posts: 1,613
Burlington,Ont.
|
Quote:
valvoline vr1 10w-30, flat tappet cam, 0 failures.
That's the oil i use but i just lost a crane cam/howards lifter Actually looks like the lifter gave out and procided to remove part of the lobe.
|
|
|
Re: Post up your oil choice!!!
[Re: 77DragracerR/T]
#451392
08/27/09 07:52 PM
08/27/09 07:52 PM
|
Joined: Aug 2003
Posts: 8,716 Baltimore/Denver
64Post
master
|
master
Joined: Aug 2003
Posts: 8,716
Baltimore/Denver
|
Quote:
Quote:
valvoline vr1 10w-30, flat tappet cam, 0 failures.
That's the oil i use but i just lost a crane cam/howards lifter Actually looks like the lifter gave out and procided to remove part of the lobe.
I run those lifters, too. That's not good...
How much spring pressure?
|
|
|
|
|