Build me a 9.90 small block - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech Build me a 9.90 small block

Print Thread

Page 3 of 3

1

2

3

Re: Build me a 9.90 small block [Re: 340RICK] #429287 08/07/09 05:34 PM 08/07/09 05:34 PM
Joined: Jan 2003 Posts: 465 Oconomowoc, WI. C Cudahlr OP mopar
Cudahlr OP mopar C Joined: Jan 2003 Posts: 465 Oconomowoc, WI.	Quote: Here is what I can remember off the top of my head R block 4.070 bore Callies 4" crank Diamond flat tops 11 to 1 Scat 6.125 chivy rods CNC Shadydell W5's stainless valves Norris rockers Big Roller Cam card is in Ryans safe Indy intake that Ryan converted for 4500 flange Out of the box #8082 1050 doinator TTi W5 headers and X pipe with 3" bullets 727 CRT tranny 8"Ptc 5500 4:56 gear dana 60 Cal tracs and all stock front suspension car 3250lbs 30x12.50 ET streets This thing ran on 94 octane and I drove it on the street alot. I spun a rod bearing from not having big enuff fittings and hoses on a remote oil filter and not enuff oil in the pan When I blew it up I sold the top end all in the quest for more speed Thanks Rick, sounds like a great build! 1968 Barracuda 360/727 11.20 @ 121 mph 421 rwhp 1985 Harley Sportster Bobber 2006 Ram 2500 sport - The Cudahlr

Re: Build me a 9.90 small block [Re: 340RICK] #429288 08/07/09 05:41 PM 08/07/09 05:41 PM
Joined: Jan 2007 Posts: 3,695 nc E emarine01 master
emarine01 master E Joined: Jan 2007 Posts: 3,695 nc	Ahhh, the cam card is in Ryans safe, that was the spec I was huntin, & the power band

Re: Build me a 9.90 small block [Re: 1Fast340] #429289 08/07/09 06:33 PM 08/07/09 06:33 PM
Joined: Jul 2006 Posts: 4,595 On the south side of Nowhere S S/ST 3040 master
S/ST 3040 master S Joined: Jul 2006 Posts: 4,595 On the south side of Nowhere	Quote: Quote: IIf I ever get over this stock stroke, factory head rollercoaster I'll build something bigger with my W-5s. � would that be before or after you try a blower with stock stroke and factory heads? I'm a naturally asparated guy mostly and have no desire to put a blower on a 340, especially with stock heads. For some reason, lately I've been entertaining the idea of a Pro-charger on 430"+ SB with an INDY or W-series head in the future though. I'll need a 4-link.

Re: Build me a 9.90 small block [Re: S/ST 3040] #429290 08/07/09 06:46 PM 08/07/09 06:46 PM
Joined: Jan 2007 Posts: 3,695 nc E emarine01 master
emarine01 master E Joined: Jan 2007 Posts: 3,695 nc	Hey Vic, save the good heads for the NA builds,

Re: Build me a 9.90 small block [Re: S/ST 3040] #429291 08/07/09 06:46 PM 08/07/09 06:46 PM
Joined: Jan 2003 Posts: 990 Vacherie, Louisiana S SuperStocker super gas
SuperStocker super gas S Joined: Jan 2003 Posts: 990 Vacherie, Louisiana	Quote: If I ever get over this stock stroke, factory head rollercoaster, I'll build something bigger with my W-5s. Go ahead Vic, open the catalog...

Re: Build me a 9.90 small block [Re: SuperStocker] #429292 08/07/09 06:57 PM 08/07/09 06:57 PM
Joined: Jul 2006 Posts: 4,595 On the south side of Nowhere S S/ST 3040 master
S/ST 3040 master S Joined: Jul 2006 Posts: 4,595 On the south side of Nowhere	Quote: Quote: If I ever get over this stock stroke, factory head rollercoaster, I'll build something bigger with my W-5s. Go ahead Vic, open the catalog... These heads are kicking my a$$! I think, with the pressure of Norwalk coming up faster than I'm getting the car done is about to drive me stark raving mad. (Short drive) Nothing has been going right on my stuff.

Re: Build me a 9.90 small block [Re: Cudahlr] #429293 08/09/09 02:27 AM 08/09/09 02:27 AM
Joined: Jan 2009 Posts: 273 Edmonton alberta Canada M mr. 63plymouth enthusiast
mr. 63plymouth enthusiast M Joined: Jan 2009 Posts: 273 Edmonton alberta Canada	My 68 barracuda went 9.75@141mph, with a 461small block pump gas, naturally aspirated street dressed car that weight 3010 with me in the car. Indy heads,single 750 carb and a 10"tire with full exhaust!! 5405629-HPIM34773.jpg (92 downloads)

Re: Build me a 9.90 small block [Re: mr. 63plymouth] #429294 08/09/09 08:37 AM 08/09/09 08:37 AM
Joined: Jan 2003 Posts: 2,813 Blue Ridge, VA Plumb Wired master
Plumb Wired master Joined: Jan 2003 Posts: 2,813 Blue Ridge, VA	4.100 bore X-block, 4.00" MP Forged crank, Eagle H-beams, Ross flat tops, W2's w/ an Indy intake, Cam Motion roller, 1050 Dominator, ran a string of 9.90's @ 138 MPH in Donald Carter's (aka: gearjammerdart) 69 Dart 3270#s with too much gear (4.88's) at the Pink's event at Charlotte, ZMax Dragway this past spring. Ran 6.20's in the 1/8. Mike Gray RIP Monte Smith aka: OutlawFish '98 Bickel Dodge Dakota PST

Re: Build me a 9.90 small block [Re: mr. 63plymouth] #429295 08/09/09 02:19 PM 08/09/09 02:19 PM
Joined: Jan 2003 Posts: 465 Oconomowoc, WI. C Cudahlr OP mopar
Cudahlr OP mopar C Joined: Jan 2003 Posts: 465 Oconomowoc, WI.	Quote: My 68 barracuda went [Email]9.75@141mph[/Email], with a 461small block pump gas, naturally aspirated street dressed car that weight 3010 with me in the car. Indy heads,single 750 carb and a 10"tire with full exhaust!! Tell me more!!! Where are the details! 1968 Barracuda 360/727 11.20 @ 121 mph 421 rwhp 1985 Harley Sportster Bobber 2006 Ram 2500 sport - The Cudahlr

Page 3 of 3

1

2

3

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1