Re: A Body Guys Post Your Vehicle Weight!
[Re: moparniac]
#366990
04/19/10 10:16 PM
04/19/10 10:16 PM
|
Joined: Jan 2003
Posts: 2,734 Charlotte, NC
446acuda
master
|
master
Joined: Jan 2003
Posts: 2,734
Charlotte, NC
|
'69 notchback Barracuda, 440 w/ iron heads, alum intake, headers, scattershield, iron case 4 spd, Dana. No cage, no fiberglass, no heater and no back seat,manual steering, manual big bolt pattern discs--3330 w/o driver.
|
|
|
Re: A Body Guys Post Your Vehicle Weight!
[Re: moparniac]
#366991
04/19/10 10:48 PM
04/19/10 10:48 PM
|
Joined: Dec 2004
Posts: 1,717 Rancho Cucamonga, Calif.
PUNK
top fuel
|
top fuel
Joined: Dec 2004
Posts: 1,717
Rancho Cucamonga, Calif.
|
3250 race weight which includes the driver weight of 225. All Steel body except for the heavy duty bolt on AAR Quality Fiberglass hood and front bumper. Stock interior including bucket seats, no rear seat, Manual steering box, liteweight wilwood front brakes, stock 8 3/4 drum to drum with a cro-moly spool. Split-mono leafs with CalTracs, Stock 340 block with Edelbrock heads and TTI exhaust all the way to the factory appearing tips. 904 transmission with 8" converter, steel driveshaft. This body has NO undercoating or excessive sealer. It has a Cro-moly Roll bar (not cage). We wish it was 200 pounds lighter.
10.53 @ 125mph. 1.37 60 foot. Caltracs and Monoleafs, AFCO shocks.
Heads by INDIO MOTOR MACHINE; IMM. CP Pistons, PC Carbs.
|
|
|
Re: A Body Guys Post Your Vehicle Weight!
[Re: 360904]
#366993
04/20/10 08:29 AM
04/20/10 08:29 AM
|
Joined: Apr 2006
Posts: 3,675 Akron, Ohio U.S.A.
roadhazard
master
|
master
Joined: Apr 2006
Posts: 3,675
Akron, Ohio U.S.A.
|
'68 B'cuda Fastback, glass hood all the rest is factory steel. Front & rear seats removed in favor of a couple plastic racing buckets, full factory dash, wiring, carpet, windows and interior panels & trim. No heater box, wipers or radio. '73 disc brake swap, S/S leafs and 6 point mild steel bar. 440 915 heads, 727 and 8.75 rear with spool. 3 row copper brass radiator for balast 3140 with out me and 3325 with me and a full 8 gallon cell. Best 60' 1.389, Best 1/8th 6.434 @ 105.50
|
|
|
Re: A Body Guys Post Your Vehicle Weight!
[Re: blown572dart]
#366994
04/21/10 07:19 AM
04/21/10 07:19 AM
|
Joined: Mar 2006
Posts: 5,067 Orlando Florida
blown572dart
master
|
master
Joined: Mar 2006
Posts: 5,067
Orlando Florida
|
Quote:
Quote:
Quote:
Not sure yet may end up around 2600lbs with any luck
We scaled it after PRI and it was 2400lbs without fuel,clutch,driveshaft and driver. I am expecting 2800lbs complete. We will know for sure Tuesday that is the last thing before we head to the track.
So I was not to far off the car ready to go came in at 2700lbs minus driver.
|
|
|
Re: A Body Guys Post Your Vehicle Weight!
[Re: JCCuda]
#366997
04/27/10 01:15 PM
04/27/10 01:15 PM
|
Joined: Dec 2006
Posts: 1,178 Indy
FlyFish
super stock
|
super stock
Joined: Dec 2006
Posts: 1,178
Indy
|
The last time I weighed the car it had: 67 Barracuda notch back, All steel, no heater box, no carpet, 1 fiberglass bucket seat, full back seat, no wiper motor, 360 w/ aluminum head, 727, aluminum radiator, sub frame connectors, 4 wheel disc brakes, 6 point mild steel cage, 8 ¾ w/spool, Weld draglites, with fuel and my 165 lbs, 3250 lbs (3085 w/o me).
67 Barracuda street car, 408, e85, 1.38 60', 6.44 @105.9 in the 1/8 mile, 10.19 @130.5 in the 1/4...so far....
|
|
|
Re: A Body Guys Post Your Vehicle Weight!
[Re: SLOW67]
#367000
03/22/11 02:40 PM
03/22/11 02:40 PM
|
Joined: Dec 2009
Posts: 20,657 in a cattle trailer down by th...
Guitar Jones
Paddle faster! I hear banjo music!
|
Paddle faster! I hear banjo music!
Joined: Dec 2009
Posts: 20,657
in a cattle trailer down by th...
|
Alum head small block, 904, 8.75, 2X3 MS chassis, cert to 8.50, strut front end, 4 link, fiberglass front end, deck lid and bumper. All steel doors with all the factory glass. The windows still roll up and down. 2430 without me in it 2600 race ready.
"Follow me the wise man said, but he walked behind"
'92 D250 Club Cab CTD, 47RH conversion, pump tweaks, injectors, rear disc and hydroboost conversion. '74 W200 Crew Cab 360, NV4500, D44, D60 and NP205 divorced transfer case. Rear disc and hydroboost conversion. 2019 1500 Long Horn Crew Cab 4WD, 5.7 Hemi.
|
|
|
Re: A Body Guys Post Your Vehicle Weight!
[Re: Guitar Jones]
#367001
03/22/11 03:00 PM
03/22/11 03:00 PM
|
Joined: Oct 2008
Posts: 492 South Jersey, NJ
DragDart360
mopar
|
mopar
Joined: Oct 2008
Posts: 492
South Jersey, NJ
|
All steel inc. heads, 2700 W/O driver 10 pt cage, Alum radiator. one race seat.Stock suspension, SS springs, 8 3/4, Pretty much gutted. No fiberglass, Lexan windows. Alum head SB soon, I'll let you know how far into the 10's
Last edited by DragDart360; 03/22/11 04:07 PM.
70 Dart Swinger, 2850 lbs SB 408, Bullet roller 264/268 @50 .636 SSDS stage 2 Edelbrock heads, 1 7/8 Headmans, 1050 dominator by Dom, 9.867 @ 133
|
|
|
Re: A Body Guys Post Your Vehicle Weight!
[Re: Guitar Jones]
#367002
03/22/11 03:01 PM
03/22/11 03:01 PM
|
Joined: Jun 2008
Posts: 577 Arkansas
Adrielp
mopar
|
mopar
Joined: Jun 2008
Posts: 577
Arkansas
|
12 point m/s cage, stock front suspension, ladder bar/coil over rear, alum floor, no original inner upholstery or street equipment, alum ez headed 400 stroker, fiberglass limited to hood.
3150 w/driver race ready
Adriel Paradise Substation Design Engineer III
|
|
|
Re: A Body Guys Post Your Vehicle Weight!
[Re: S/ST 3040]
#367004
03/22/11 06:25 PM
03/22/11 06:25 PM
|
Joined: Jul 2006
Posts: 4,595 On the south side of Nowhere
S/ST 3040
master
|
master
Joined: Jul 2006
Posts: 4,595
On the south side of Nowhere
|
Quote:
2010 UPDATE (I hope)
LRT crossmember w/fabbed steering column
all new .040" aluminum tin work
fiberglass rear bumper and fabbed brackets
Mark Williams Dana 60 w/4-wheel discs
904
plus meticulous weight saving (undercoating, wiring, etc.)
predict under 2700 lbs. race ready
|
|
|
Re: A Body Guys Post Your Vehicle Weight!
[Re: Super Scamp]
#367007
03/22/11 10:24 PM
03/22/11 10:24 PM
|
Joined: Apr 2009
Posts: 3,421 Toronto
mshred
master
|
master
Joined: Apr 2009
Posts: 3,421
Toronto
|
Hey Sledge, thanks for the bump on this I guess I'll contribute 71 scamp all steel 340/5 speed/ 8-3/4 Full interior with sound system, heater, insulation, etc. street car 3380 with me in it, and im about 180 pounds 3200 flat without me in it This year getting a 360/Dana/ 4 speed, so we'll see how much the weight changes (hopefully the same or less)
|
|
|
|
|