Well out with the old and soon to be in with the new Hemi.

Was the old engine not making enough jam???? Some of you guys are just hard core!!! TBF

Jimmy the phone battery went dead .. call me this weekend.. Tell me more

Ok Ken I will call later or tomorrow.

we need pictures

Dang Jimmy do you just like to work on them or what.

I want to see it go down the track already.

This is the look I had on my face when I read this

Thats AWESOME bigdad.. Sooo, are you still gonna be known as 572 or will it be different . Are all your internals going to get dropped in it.. Wheres the pics?????

Well the other one needed going thru anyway and the deal I ran into required immediate attention.

It's a 526cu TFX Hemi that should be enough to push the new chassis to the limit.It will no longer be using water so kepping the old one was out of the question.

Just not practical for it's intened purpose.There was concern for the water block being able to withstand the boost.

Now we have a ton of room up front and alot less stuff to worry about.

I too am ready to see it go down the track.

Quote:

---

Sooo, are you still gonna be known as 572 or will it be different

---

Guess I will have to change it to blown526dart

Just curious Jim, did you keep all the blower stuff? or going to all new/differnt blower set up?

I upgraded From a PSI C rotor to a D rotor. Still going to try the EFI.The old blower maxed out around 40lbs and the new one can exceed 60lbs.

I am kepping my crank,cam and rocker gear to use on the new one and a few other odds and ends.

could you explane the c rotor to d rotor differances?i tried to read on this at insidetopalcohol.com[]no luck.
thanks for any help.

I was told that the C has alot more clearance and it is for gas but can be run with alky. The Ds clearances are alot tighter and you can only run alky. I belive they are also diffrent inside and out. The rotors on the D seem much bigger than the C. I will get some pics of the D to compare the 2. The D also has a burst panel built in to the case.The D is magnisuim and the C is cast aluminum.





This is the c

YAWN!!!!!

Bigdad, where did you get that cat?? That's hilarious. Mike