Here’s a NOs Charger emblem PN3504807. $50
Shipping at actual cost
PayPal friends and family, personal check or local pickup OK

Thank you,

Bill

Here’s a nice Big Block 971 Oil Pan $200
Shipping at actual cost
PayPal friends and family, personal check or Local Pickup OK

Thank you,

Bill

Here’s a fuel trim ring that I can’t remember what it fits? $15
Shipping at actual cost
PayPal friends and family, personal check

Non-A/C water pump pulley 3671318 for all 1972 Big Block engines. Will probably fit other years too. $25.00 + shipping from 61704.

This is a used seat belt system switch, part number 3620863 for all 1972- 1974 A, B, & E body cars with bucket seats. This clips onto the springs under the seat cushion connects to the seat belt warning system. It can be used for either driver or passenger seat. Im not sure if it works, but it's a pretty simple mechanism. $25 OBO + $5.00 shipping from 61704.

Set of 8 Mopar branded Champion-made spark plugs in the original packaging. Resistor plugs so they don't make noise over your radio! Fit most big block Mopars from the 60s and 70s. $10/set OBO + $8.00 Shipping. I have multiple sets. Located in Central Illinois, 61704.

1968 Dodge Coronet grille

Nice driver-quality grille complete with headlight surrounds, located in Franklin, Ky just off Interstate 65 at the KY/TN state line.

Asking $100

PM me here on Moparts.

Thanks, Moparts!

Sold

1970 Charger Bucket Seat Foam New Legendary Interior
****SOLD****

FOR SALE 8 spark plugs N14Y fits Mopar engines Hemi and 340. Could fit other engines. Price $10.00 plus $10.00 shipping Bob Horman

1 Pr. original 426 HEMI cylinder heads, one is dated 12-67, one is date 1-68, nice used condition, basically bare with a brand new set of Ferrea valves and locks $4500.00 for the pair (708) 288-2879

NOS 2809013 Windshield Washer Pump


Fits all models 67 and up! Have 2 on hand!


40.00 each plus shipping. PayPal preferred.


Bill Rolik


bremotorsports@verizon.net


201-394-5533 Cell/Text

Mopar 1968, 1969 & 1970 B-body Tic Toc Tach, restored by Scott Ericson at ESE & Associates $550.00 (708) 288-2879

All from a 68 Charger 4 or 5 speaker system
This is all I have left
All for 300.00 plus shipping from Cheshire CT

From 68 charger rear bumppetts that was restored (rechromed) but taken apart for a resto mod.
100.00 plus 10.00 shipping from Cheshire CT

From a 68 Charger Cali car
1968-70 Dodge Charger Rear Bumper Guard Reinforcement Brackets
2883961
2883962

Very nice 100.00 plus shipping from Cheshire CT

FOR SALE 1968-69 Dodge Charger grill headlight door vacuum actuator. used working condition Price $50.00 each plus $12.00 shipping each actuator Bob Horman

Brand new B-Body resonators - made in the USA. The ones pictured are 2.5" ID in/out, with 2.5" internal flowpath (also available in 2.25" version). These are built just like OE with aluminized construction & spun-locked heads. They are 4" round body diameter & 16" L bodies. As you can see, these are straight-through & non restrictive. They are Helmholtz tuner type resonators that knock-out some high frequencies. $75.00/ea. plus shipping.

Here's a pair of these with shorty Bazooka tips connected to them:

Air cleaner assembly for 1969 Air Grabber/Ramcharger induction. For 383 4BBL. Very good condition but could use restoration. Base, lid and filter. See the pics. More pics available upon request.

Please ask all questions before purchase. All sales final.

$800 with free shipping/insurance to lower 48. Anywhere else will be at actual shipping cost.

PM me here.

Thanks!

SALE PENDING

I have a fairly rust free Vega rear hatch with glass and trim. These are used when building a Daytona clone. Located in Cookeville, TN.
I’d prefer a cash and carry deal, but I will be going to the Indy Cylinder head swap meet at the end of February. Asking $650.00 OBO.
Please PM me here.