Misc. E-Body parts:
70-74 V-8 K-frame-also fits 70-72 B-body. Asking $100
Challenger rear glass-clear. Asking $75 (can't ship)
73-74 Cuda front bumper with brackets. Asking $75 (can't ship)
Barracuda driveshaft 43.75" center to center-3" tube 7260 joints for 727/8 3/4. Asking $125
Contact Bud: Kramden426 at aol.com

Pair of 1971 Dodge Challenger taillight assemblies. Lenses are in good condition with no cracks. Could use some polishing. Housings are in good condition. Asking $175 for the pair.
Contact Bud: Kramden426 at aol.com

One Challenger door window rubber weatherstrip. $10

1970 Challenger driver side taillight lens. $55

Shaker hood decal. A couple of small blems. $5

71 B/E-body ignition light harness with delay relay. $75

E-body fresh air heater box vent cable with round knob. $20

1970 New E-body rally dash woodgrain decals for 4 switch dash. $40

70 Challenger dash speaker grill #2984783. $45

Shaker hood 440 six pack air cleaner base plate support brackets. New. $50

1971 Challenger passenger side rear quarter end cap molding. $30

Set of new E-body side-view mirror mounting screws for 70-74 E-bodies/71-72 B-bodies. $15

70-74 E-body brake pedal switch and bracket. $20

71 B/E-body ignition light harness complete with delay harness. $100

1970 E-body ignition key lamp. $75

Challenger 1 passenger side and 4 driver's side front parking lenses. $20 each

71-74 E-body left side lower dash bezel part #2984025. $45

Nice original E-body passenger side kick panel. Is black now but looks like it was originally burnt orange in color. $25

One pair of torsion bar adjusting bolts and nuts. $20

Challenger driver side front side marker assembly. Lens cracked and plug is missing but bezel has good chrome. $20

1 Pair of new E-body horn brackets. These are the short style. $15 pair

1970 Reproduction Challenger Owner's Manual. $15

1971 Challenger Owner's Manual. $25

1971 Dodge Scat Pack brochure. $20

1970 Dodge Scat Pack brochure. $20

1970 Dodge dealer sales brochure. $20

New 1970 Challenger illustrated facts and features manual. $8

Chilton's 1965-72 Barracuda/Challenger repair and tune-up guide. As-new condition. $40

October 1969 issue of Dodge News magazine featuring the new 1970 models. $20

1970 Challenger R/T Dream Machines trading card #29 featuring a purple Challenger. $3

Challenger R/T beer bottle coozie. Blue with white lettering. $8

2009 Dodge Challenger dealer sales brochure. $10

Prices do not include shipping.

gt340 at yahoo.com

Rally gauge housing with small gauges, Very good condition. $275 U.S. shipping included, PM or email moparmafia@yahoo.com.
My reply might be slow because I try and check computer once a day.

Rare Burnt Orange. Slight damage that would need attention or use as is. $150 U.S. shipping included. PM or email moparmafia@yahoo.com.

In good condition. Must pick up in middle Tennessee. $1500 firm. PM or email moparmafia@yahoo.com

72 Cuda double hump hood. Driver quality. Pictures on request. $250.00

Bolt-on fiberglass AAR hood with springs and hood pin holes. $500.00

Prices are plus shipping from 61877 or will bring to Indy Cylinder Head in March if paid for.

E-mail: tgt51@hotmail.com

Rear trailer tie down brackets for most A, B, or E body vehicles (doesn’t fit the 7 ¼ rear axle). These piggyback onto the bottom of the stock shock plate mounting nuts and then 4 more nuts hold these tie down brackets on. You must have enough extra thread hanging down on the bottom of your U-bolts to fit the ¼” thick tie down bracket and another nut. No disassembly necessary, just slide the brackets over the extra thread on your U-bolts, install the included nuts, tighten them down and you’re done. Takes about 10 minutes to install. These eliminate all the hassles that come with using axle straps. Fits A, B, and E body cars with the standard shock plates like shown in the pictures. $60.00 per pair plus shipping. I also have these available for cars with CalTracs, same price. Made in the USA.
Email mrrandyj@aol.com

NORS CA-305 2863349 Air filter Unsure of manufacturer or actual part number
OD 12-13/16", ID 11-1/16", Height 2-3/4", these dimensions are the same as some NOS CA-305 filters I have
I picked these up without any packaging from a swap meet a couple years back
The rubber is a little darker red than Fram, the perforation holes are smaller and not puckered. The inner screen does look to be metal.
Not the filter if you are going for an OE restoration but an economical choice if it is close enough for you.
Used on several 2 and 4 barrel applications from about 1968 until early 80's including 70-71 340, 383, and 440

$50.00 including shipping in lower 48 states.

Various Mopar A, B & E body parts for sale
OEM 3 Nipple breather $35.00
Fine Lines Metal Rear Axle Brake Line 1965-1969 C-body, 1968-70 B-Body, 1970-74 E-Body $20.00
RARE 1970 E Body Steering column lock tube with bushing $40.00
Aftermarket Sway bar brackets, poly bushing and mtg hardware $10.00
B E & A reproduction 1970-71 CUDA one long tail panel trim, located above bumper or below trunk lid $45.00
OEM refinished by PLUMBEEPER Rim Blow steering wheel with original Cuda fish-cap $1207.00 or best offer
Heater hose stencil kit with instructions for 1970 A/E body non air # 860457 83044 $30.00
Jack & black base $45.00


Contact via PM or email for questions or pics.
zabinsky4@msn.com
Cash or USPS Money Order ONLY, buyer pays shipping.

Thanks for the ad MOPARTS!Variuos

Restored 4934 AVS carburetor for 1970 340 auto cars. Date Code L9. Linkages, screws, solenoid housing and bracket disassembled and zinc plated. Solenoid tested and works.

$650.00 + shipping for zip code 18929

I have a 440 six pack center carb part # 4144-1 that was factory reconditioned by Holley. Has not been run since reconditioned.

$750 shipped in the lower 48 states. I will ship internationally for the added cost.

Email me at procketrichard@hotmail.com for more pictures or any questions.

A set of original 1970-71 3-speed / variable wiper linkages with wiper pivots. Rods 2822291 & 2822293, levers 3431048 & 3431049. The more common 291 rod (used on all years 2-speed and 3-speed) has a slight bend as seen on the photos. Please look at the pics closely for condition; more pics available if needed.

$350/set, plus shipping. I'm never offended by offers. TWSchuler@aol.com

I have other six-pack, T/A, NOS and nice used Challenger parts for sale. Message me for a list if interested.

A set of original 1972-74 3-speed / variable wiper linkages with one wiper pivot. Rods 2822291 & 3431514, lever 3431049. Please look at the pics closely for condition; more pics available if needed.

$175/set, plus shipping. I'm never offended by offers. TWSchuler@aol.com

I have other six-pack, T/A, NOS and nice used Challenger parts for sale. Message me for a list if interested.

An original T/A-AAR wide lip air cleaner lid. Several dings and dents as seen in the pics. Please look at the pics closely for condition; more pics available if needed.

$225, plus shipping. I'm never offended by offers. TWSchuler@aol.com

I have other six-pack, T/A, NOS and nice used Challenger parts for sale. Message me for a list if interested.

Pair of 340-6 rocker shafts P3577086. $650. Will ship for actual shipping cost. PayPal friends and family or personal check ok. Local pickup OK in Monroe, WA

Ask if you need more photos and specify the photo angle you desire.

SOLD pending payment

Here’s a NIB driveshaft yoke PN 2883575. $60 Shipping at actually cost. PayPal Friends and Family, check or local pickup.

This is the FRONT drive shaft sliding yoke that fits 1970-76 WITH yokes that use the small 7260 U joint and the 29 spline output shaft. NO RUST on the part. This is a protective covering residue. New old stock original Chrysler part.

Nice headlight bezel NIB $250. Nice shape except on mark as shown in photo. Actual shipping cost or local pickup OK. PayPal friends and family or check. Ask if you want more photos please select angle you want.

NOS Chrysler Mopar Thermostat 195*, $20

Email Kenei@comcast.net