Previous Thread
Next Thread
Print Thread
Page 1 of 3 1 2 3
For Sale - Parts - A Body - 1st Quarter #3279425
12/31/24 07:27 PM
12/31/24 07:27 PM
Joined: Jan 2003
Posts: 15,676
Norwich CT USA
moparts Offline OP
I Live Here
moparts  Offline OP
I Live Here

Joined: Jan 2003
Posts: 15,676
Norwich CT USA
up

Re: For Sale - Parts - A Body - 1st Quarter [Re: moparts] #3279560
01/01/25 10:24 AM
01/01/25 10:24 AM
Joined: Jan 2003
Posts: 5,813
Detroit area
6PAX Offline
master
6PAX  Offline
master

Joined: Jan 2003
Posts: 5,813
Detroit area
Under dash courtesy light socket from a 70 Dart. $10

Passenger side plastic dust shield that mounts on frame rail. Part #4434. $10

1970 A/B-body steering column Ignition key light and harness. $75

1970 Dart front bumper. Was rechromed and looked like new but got dented. Nice core for resto. $50

72-76 A-body rear view mirror. Nice. $50

Gas pedal from a 68 Dart. $15

Glove box door retaining cable. $10

Slant 6 motor mounts and brackets from a 69 Dart. $25

Drum brake master cylinder from a 69 Dart with prop valve and lines. $35

Deluxe black three spoke steering wheel from a 69 Dart. It has some cracks. Has a nice center horn pad with Dodge emblem and horn contact. $125

69 Dart front bumper. Good for a driver or as a core for rechrome. $50 (Pick-up only)

Original standard package tray from my 69 Dart GT including the pad that goes underneath it. Pad has some small tears but no material is missing. $35

Original black dash pad from my Dart as well. Has 3 or 4 small cracks but nothing major. It was perfect until the guy at the paint shop leaned on it while removing the windshield molding clips. I'm not sure what to ask for it so I'll put a starting price of $150 o.b.o. and go from there.

Set of four window cranks from a 72 Dart. $30

68-72 Dart vinyl top moldings. $80

Two 318 driver side spool motor mounts pt#3642811. One is used and one is NOS. $20 for the used. $35 for the NOS.

Turn signal arm from 69 A-body steering column. $10

1969 Dart Swinger 3M white bumblebee stripe. $60

Hood latch and bolts from a 1969 Dart Swinger hood. $25

69 Dart GT inner door emblem. $40

A/B 68-70 black seat belt guide for where the seat belt goes through the bench seat. I only have one. $10

Heater knobs from a 70 Dart. $15

1970 Dart Dodge hood emblem. $40

Two 1966 (maybe 65 as well) full circle three spoke steering wheel horn rings. Both have minor pitting. One has some abrasions on a couple of the spokes. They are part number 2643689. $25 for the pair.

Pair of black A/B-body rear seat seat belt clips. $25

Driver side deluxe chrome remote mirror. Pretty nice chrome but glass is loose. $60

67-69 Dart lower windshield molding. No dents. $60

Hood catch from a 68 Dart hood. $15

A-body frame mount z-bar ball pivot stud with nut. $10

Pair of new reproduction chrome A/B-body L&R deluxe mirrors. $200

New reproduction 68 Dart GT trunk emblems. $35

1 Pair of new muffler floor pan hanger brackets for 1967-1974 A-body models. $70

69 Dart hood Dodge emblem. $35

1969 Dart black bench seat with good headrests & tracks. A couple splits in the vinyl but not real bad. No hinge covers. $450

NOS Stant chrome gas cap. I believe this is for 72-up A-bodies as it has two sets of tabs on the back. $25

Pair of torsion bar adjusting bolts. $20

New black 67-74 Dart standard package tray (without speaker cutouts). $45

Three spoke black steering wheel with full horn ring and Dodge horn button. The wheel is in pretty good shape. It doesn't have any cracks, just typical scuffs/scratches so it could use a polishing. The horn ring has some light pitting but looks decent. $250

70-72 Dart/Demon front of hood molding. One dent. $75

Pair of 70-71 Duster taillight lenses. They both have broken corners. $10 for the pair.

Glove box door from a 71 Duster. No lock or lock bezel. $15

69 A/Body ignition key light and bezel. This was a 68 bezel that the hole was enlarged to fit a 69 switch. $25

1969 Ignition key light bezel. $15

1969 Ignition switch (no key) with black plastic dash bezel. $30

1971 Duster filler neck and gas cap. $125

1968 A/B-body column shift power steering column. $100

Buddy seat (red) including floor brackets from a 74 Dart. $225

1968 Dart owner's manual packet. $30

1971 Duster sales brochure. $20

1968 Dart Facts and Features Manual. $10

Prices do not include shipping.

gt340 at yahoo.com

Last edited by 6PAX; 01/02/25 08:37 PM.
Re: For Sale - Parts - A Body - 1st Quarter [Re: moparts] #3279624
01/01/25 12:07 PM
01/01/25 12:07 PM
Joined: Aug 2005
Posts: 982
East Brunswick, NJ
B
budman1965 Offline
super stock
budman1965  Offline
super stock
B

Joined: Aug 2005
Posts: 982
East Brunswick, NJ
Power steering boxes. Not sure of the exact application. One is part # 2287262 and the other is M2127009. No pitman arms or hose nipples. Asking $25 each. Contact Bud: Kramden426 at aol.com

IMG_1884.JPG (608 downloads)
IMG_1885.JPG (608 downloads)
Re: For Sale - Parts - A Body - 1st Quarter [Re: moparts] #3279626
01/01/25 12:10 PM
01/01/25 12:10 PM
Joined: Aug 2005
Posts: 982
East Brunswick, NJ
B
budman1965 Offline
super stock
budman1965  Offline
super stock
B

Joined: Aug 2005
Posts: 982
East Brunswick, NJ
Rear window trim for a Duster, Demon or Dart Sport. Complete set of 4 pieces in good condition with no damage. Asking $50 for all but can't ship. Contact Bud: Kramden426 at aol.com

dustrearwind.JPG (604 downloads)
Re: For Sale - Parts - A Body - 1st Quarter [Re: moparts] #3279637
01/01/25 12:20 PM
01/01/25 12:20 PM
Joined: Aug 2005
Posts: 982
East Brunswick, NJ
B
budman1965 Offline
super stock
budman1965  Offline
super stock
B

Joined: Aug 2005
Posts: 982
East Brunswick, NJ
Manual steering box with pitman arm from I think a 72 Demon. Unit is very clean and tight and spins freely lock to lock. Has universal welded on as coupler to steering column. Will fit most cars but will use a different arm. Asking $100. Contact Bud: Kramden426 at aol.com

abodymanbox.JPG (604 downloads)
abodymanbox2.JPG (605 downloads)
IMG_1712.JPG (603 downloads)
IMG_1714.JPG (604 downloads)
Re: For Sale - Parts - A Body - 1st Quarter [Re: budman1965] #3279775
01/01/25 06:03 PM
01/01/25 06:03 PM
Joined: Jun 2003
Posts: 2,432
Weatherford, Texas
RapidusMaximus Offline
top fuel
RapidusMaximus  Offline
top fuel

Joined: Jun 2003
Posts: 2,432
Weatherford, Texas
Sold local, thanks

IMG_0228.jpeg (582 downloads)
IMG_0226.jpeg (583 downloads)
IMG_0227.jpeg (581 downloads)
IMG_0225.jpeg (581 downloads)
Last edited by RapidusMaximus; 01/17/25 08:28 PM.

1968 Plymouth GTX
1974 Dodge P/U Long Bed Stepside 318
2019 Ram 2500 6.4, auto, 4WD
1970 Duster Door 'Passenger side" [Re: RapidusMaximus] #3279958
01/02/25 12:44 PM
01/02/25 12:44 PM
Joined: Feb 2003
Posts: 2,600
S.E. Michigan
cl440 Offline
master
cl440  Offline
master

Joined: Feb 2003
Posts: 2,600
S.E. Michigan
Passenger door from a 1970 Plymouth Duster. Door is in good shape. $125.00 OBO. Pick up only. I have more pics upon request

20240810_175122.jpg (533 downloads)
Re: 1970 Duster Door 'Passenger side" [Re: cl440] #3280078
01/02/25 08:33 PM
01/02/25 08:33 PM
Joined: Jan 2003
Posts: 5,813
Detroit area
6PAX Offline
master
6PAX  Offline
master

Joined: Jan 2003
Posts: 5,813
Detroit area
Three spoke black steering wheel with full horn ring and Dodge horn button. The wheel is in pretty good shape. It doesn't have any cracks, just typical scuffs/scratches so it could use a polishing. The horn ring has some light pitting but looks decent. $250

gt340 at yahoo.com

67-69 Steering Wheel.JPG (505 downloads)
67-69 Steering Wheel2.JPG (505 downloads)
67-69 Steering Wheel3.JPG (504 downloads)
67-69 Steering Wheel4.JPG (505 downloads)
Re: For Sale - Parts - A Body - 1st Quarter [Re: moparts] #3280110
01/02/25 11:00 PM
01/02/25 11:00 PM
Joined: Jan 2003
Posts: 1,591
CT
M
mrrandyj Offline
pro stock
mrrandyj  Offline
pro stock
M

Joined: Jan 2003
Posts: 1,591
CT
Rear trailer tie down brackets for most A, B, or E body vehicles (doesn’t fit the 7 ¼ rear axle). These piggyback onto the bottom of the stock shock plate mounting nuts and then 4 more nuts hold these tie down brackets on. You must have enough extra thread hanging down on the bottom of your U-bolts to fit the ¼” thick tie down bracket and another nut. No disassembly necessary, just slide the brackets over the extra thread on your U-bolts, install the included nuts, tighten them down and you’re done. Takes about 10 minutes to install. These eliminate all the hassles that come with using axle straps. Fits A, B, and E body cars with the standard shock plates like shown in the pictures. $60.00 per pair plus shipping. I also have these available for cars with CalTracs, same price. Made in the USA.
Email mrrandyj@aol.com

20200320_193944.jpg (487 downloads)
20180901_162334.jpg (485 downloads)
20180831_162012.jpg (486 downloads)
20180901_160549.jpg (484 downloads)
Wood Wheel [Re: moparts] #3280181
01/03/25 11:45 AM
01/03/25 11:45 AM
Joined: Jan 2006
Posts: 4,087
ct.
M
moparlouie Offline
master
moparlouie  Offline
master
M

Joined: Jan 2006
Posts: 4,087
ct.
64-67 OEM wood wheel in excellent original condition, No cracks, real nice chrome, the horn wire is there but not pictured, getting very hard to find in this shape. $550. Plus shipping. lafrancebiglou@aol.com

100_7220.JPG (446 downloads)
100_7217.JPG (451 downloads)
100_7218.JPG (448 downloads)

Have been a member for years!
Re: For Sale - Parts - A Body - 1st Quarter [Re: moparts] #3280480
01/04/25 05:09 PM
01/04/25 05:09 PM
Joined: Sep 2003
Posts: 653
SE PA
C
cudaize Offline
mopar
cudaize  Offline
mopar
C

Joined: Sep 2003
Posts: 653
SE PA
NORS CA-305 2863349 Air filter Unsure of manufacturer or actual part number
OD 12-13/16", ID 11-1/16", Height 2-3/4", these dimensions are the same as some NOS CA-305 filters I have
I picked these up without any packaging from a swap meet a couple years back
The rubber is a little darker red than Fram, the perforation holes are smaller and not puckered. The inner screen does look to be metal.
Not the filter if you are going for an OE restoration but an economical choice if it is close enough for you.
Used on several 2 and 4 barrel applications from about 1968 until early 80's including 70-71 340, 383, and 440

$50.00 including shipping in lower 48 states.

20250104_163404.jpg (570 downloads)
20250104_163242.jpg (568 downloads)
20250104_164121.jpg (568 downloads)
20250104_163324.jpg (566 downloads)
Water pump pulleys-single groove [Re: moparts] #3280632
01/05/25 11:06 AM
01/05/25 11:06 AM
Joined: Dec 2004
Posts: 161
Albert Lea, MN
G
GTX5877 Offline
member
GTX5877  Offline
member
G

Joined: Dec 2004
Posts: 161
Albert Lea, MN
Have several water pump pulleys for sale. All were hot tanked and glass beaded, one is painted satin black. All fitment is best I could find. Verify for your application. $30 each + shipping from 56007.

Mopar 2951836 single groove water pump, '70-'71 340 6-7/8" x 3" deep

Mopar 2951092 single groove water pump big block with A/C 69-72 440, 69-71 383 5-3/8" x 1-1/4" deep

No part number on painted pulley, believe it is B.B. water pump pulley 6-7/8" x 2-3/4" deep

Cross posted

IMG_8211.JPG (519 downloads)
IMG_8214.JPG (523 downloads)
IMG_8218.JPG (520 downloads)
IMG_8224.JPG (521 downloads)

1967 Dart GTS 426 Gen III Hemi
1968 Hemi Cuda 572 SS/AH Clone
1988 Chrysler LeBaron Coupe S/S
2003 Dodge Ram 1500 4dr SLT lowered
2012 Ram 1500 2wd Lowered
1970-1/2 Camaro Z-28
1974 VW Karman-Ghia
Re: For Sale - Parts - A Body - 1st Quarter [Re: cudaize] #3280642
01/05/25 11:41 AM
01/05/25 11:41 AM
Joined: Sep 2003
Posts: 653
SE PA
C
cudaize Offline
mopar
cudaize  Offline
mopar
C

Joined: Sep 2003
Posts: 653
SE PA
Restored 4934 AVS carburetor for 1970 340 auto cars. Date Code L9. Linkages, screws, solenoid housing and bracket disassembled and zinc plated. Solenoid tested and works.

$650.00 + shipping for zip code 18929

20240130_185847.jpg (513 downloads)
20240130_185857.jpg (512 downloads)
20240130_185906.jpg (513 downloads)
20240130_185949.jpg (513 downloads)
Re: For Sale - Parts - A Body - 1st Quarter [Re: moparts] #3281135
01/07/25 12:11 PM
01/07/25 12:11 PM
Joined: Aug 2003
Posts: 5,864
NJ
M
moparply Offline
master
moparply  Offline
master
M

Joined: Aug 2003
Posts: 5,864
NJ
NOS Chrysler Mopar Thermostat 195*, $20

Email Kenei@comcast.net

IMG_4818.jpeg (431 downloads)
IMG_4819.jpeg (430 downloads)
IMG_4820.jpeg (431 downloads)
Re: For Sale - Parts - A Body - 1st Quarter [Re: moparts] #3281460
01/08/25 02:57 PM
01/08/25 02:57 PM
Joined: Dec 2005
Posts: 2,892
Bowling Green KY / Nashville, ...
300by500 Offline
master
300by500  Offline
master

Joined: Dec 2005
Posts: 2,892
Bowling Green KY / Nashville, ...
A-Body 8-3/4, standard width, perches moved in to the frame rails (for mini-tub car), 3:91 Suregrip, Moser axles, bigger B-body drum brakes, 741 case, very good condition, ready to go complete with parking brake cables and pinion snubber.

Located in Franklin, KY, 5 miles from Interstate 65 at the TN/KY state line. Can mount on a pallet for pickup, zip is 42134.

Asking $1800 - make offer. PM me here on Moparts if interested.

Thanks, Moparts!

rear1.jpeg (369 downloads)
Last edited by 300by500; 01/08/25 02:58 PM.
Upgraded Kelsey Hayes 4 Piston Discs Rebuilt- Nice! [Re: 440PURSUIT] #3281504
01/08/25 06:06 PM
01/08/25 06:06 PM
Joined: Dec 2004
Posts: 1,564
DC, MD Suburbs
440PURSUIT Offline
pro stock
440PURSUIT  Offline
pro stock

Joined: Dec 2004
Posts: 1,564
DC, MD Suburbs
Selling rebuilt and Upgraded Kelsey Hayes 4 piston, disc brake set up with Hard to Get Parts.
Parts should be Cleaned off and Bearings will need Greased and Seals purchased and Installed.

Used on the 1965-72 A body Mopar cars, such as Duster, Dart, Demon, Valiant, and the 65-69 1st and 2nd generation early Barracuda's.
These brakes will fit, work, on the 64 and earlier A body line of cars.
These are the 4 inch, small bolt pattern brakes with new RIGHT HANDED Studs.

**New Set of C-Quence Drilled and Slotted Rotors and Ceramic Pads-
These Rotors are usually on Back order and HARD to Get.
*Cleaned and Detailed Spindles with Correct Bolts and new A2 A6 Bearings and Foam Seals-
*Clean Detailed Backing Plates
*Blasted Painted Caliper Hose Brackets

**A set of DFC , Dynamic Friction Company Ceramic Pads come with the setup and the anti Rattle Clips are included.

**Calipers were Blasted, Painted serviced with Polished Stainless Pistons and Seals.

----Missing a few readily available parts-
You will need a Set of Cross Over Lines- $60 Ebay and Brake Hoses $35, 10" drum inner seals available at Napa or Rock Auto (National 6840S $4.12)

I purchased this set up for my 67 Barracuda as pictured, but have decided not to use since I got Big Bolt Rear Axles and front brakes.

$1100 / Offer with all Pictured and Upgraded Parts-
Shipping should be about $80-100 in US-

May be able to Deliver and Meet South down 95 from DC area

IMG_3681.jpeg (352 downloads)
IMG_3685.jpeg (350 downloads)
IMG_3701.jpeg (351 downloads)
IMG_3702.jpeg (347 downloads)
Last edited by 440PURSUIT; 01/08/25 06:12 PM.
A Body Under Steering Column Trim, #2822789 [Re: moparts] #3282329
01/12/25 09:26 PM
01/12/25 09:26 PM
Joined: Dec 2012
Posts: 4,759
Fenton, MI
Memongo Offline
Parts peddler
Memongo  Offline
Parts peddler

Joined: Dec 2012
Posts: 4,759
Fenton, MI
A Body Under Steering Column Trim, #2822789, Used, $20.00 + Shipping, Payment via US Postal Money Order Only! Shipping: US Address Only!
Call Steve 810-629-1097

68-76 A Body Glove Box Cable [Re: Memongo] #3282330
01/12/25 09:27 PM
01/12/25 09:27 PM
Joined: Dec 2012
Posts: 4,759
Fenton, MI
Memongo Offline
Parts peddler
Memongo  Offline
Parts peddler

Joined: Dec 2012
Posts: 4,759
Fenton, MI
68-76 A Body Glove Box Cable, Used, $10 + Shipping, Payment via US Postal Money Order Only! Shipping: US Address Only!
Call Steve 810-629-1097

A Body Inside Front Door Panel Top Trim [Re: Memongo] #3282331
01/12/25 09:28 PM
01/12/25 09:28 PM
Joined: Dec 2012
Posts: 4,759
Fenton, MI
Memongo Offline
Parts peddler
Memongo  Offline
Parts peddler

Joined: Dec 2012
Posts: 4,759
Fenton, MI
A Body Inside Front Door Panel Top Trim, Used, $40 + Shipping, Payment via US Postal Money Order Only! Shipping: US Address Only!
Call Steve 810-629-1097

NOS 65-70 A Body Trunk Light Switch [Re: Memongo] #3282332
01/12/25 09:29 PM
01/12/25 09:29 PM
Joined: Dec 2012
Posts: 4,759
Fenton, MI
Memongo Offline
Parts peddler
Memongo  Offline
Parts peddler

Joined: Dec 2012
Posts: 4,759
Fenton, MI
NOS 65-70 A Body Trunk Light Switch. New, $25 + Shipping, Payment via US Postal Money Order Only! Shipping: US Address Only!
Call Steve 810-629-1097

68-76 A Body 2 Speed Wiper Arm #2889966 [Re: Memongo] #3282333
01/12/25 09:30 PM
01/12/25 09:30 PM
Joined: Dec 2012
Posts: 4,759
Fenton, MI
Memongo Offline
Parts peddler
Memongo  Offline
Parts peddler

Joined: Dec 2012
Posts: 4,759
Fenton, MI
68-76 A Body 2 Speed Wiper Arm #2889966 With Clip, Used, $25 + Shipping, Payment via US Postal Money Order Only! Shipping: US Address Only!
Call Steve 810-629-1097

73-76 A Body Dart / Duster Coat Hooks [Re: Memongo] #3282334
01/12/25 09:31 PM
01/12/25 09:31 PM
Joined: Dec 2012
Posts: 4,759
Fenton, MI
Memongo Offline
Parts peddler
Memongo  Offline
Parts peddler

Joined: Dec 2012
Posts: 4,759
Fenton, MI
73-76 A Body Dart / Duster Coat Hooks. Used $20 For The Pair + Shipping. Payment: US Postal Money Only! Shipping US Address Only!
Call Steve 810-629-1097

Coat Hooks 73-76.jpg (199 downloads)
1972-1976 Dodge 14" Hubcaps, Set Of Four [Re: Memongo] #3282335
01/12/25 09:32 PM
01/12/25 09:32 PM
Joined: Dec 2012
Posts: 4,759
Fenton, MI
Memongo Offline
Parts peddler
Memongo  Offline
Parts peddler

Joined: Dec 2012
Posts: 4,759
Fenton, MI
1972-1976 Dodge 14" Hubcaps, Set Of Four. Used, $100 + Shipping. Payment via US Postal Money Order Only!. Shipping: US Address Only!
Call Steve 810-629-1097

72-76 Dodge Hud Caps.jpg (199 downloads)
Dodge, Plymouth, Chrysler Dome Light Housing And Lens [Re: Memongo] #3282336
01/12/25 09:32 PM
01/12/25 09:32 PM
Joined: Dec 2012
Posts: 4,759
Fenton, MI
Memongo Offline
Parts peddler
Memongo  Offline
Parts peddler

Joined: Dec 2012
Posts: 4,759
Fenton, MI
Dodge, Plymouth, Chrysler Dome Light Housing And Lens. Used, $25 + shipping. Payment via US Postal Money Order Only! Shipping: US Address Only!
Call Steve 810-629-1097

Dome Light 1.jpg (198 downloads)
Dome Light 2.jpg (199 downloads)
66-74 A,B,E Body OEM Windshield Washer Reservoir Cap [Re: Memongo] #3282337
01/12/25 09:34 PM
01/12/25 09:34 PM
Joined: Dec 2012
Posts: 4,759
Fenton, MI
Memongo Offline
Parts peddler
Memongo  Offline
Parts peddler

Joined: Dec 2012
Posts: 4,759
Fenton, MI
66-74 A,B,E Body OEM Windshield Washer Reservoir Cap. Used, $5 + Shipping. Payment via US Postal Money Order Only! Shipping: US Address Only!
Call Steve 810-629-1097

Dodge, Plymouth, Chrysler Driver Side Door Panel Remote Mirr [Re: Memongo] #3282338
01/12/25 09:35 PM
01/12/25 09:35 PM
Joined: Dec 2012
Posts: 4,759
Fenton, MI
Memongo Offline
Parts peddler
Memongo  Offline
Parts peddler

Joined: Dec 2012
Posts: 4,759
Fenton, MI
Dodge, Plymouth, Chrysler Driver Side Door Panel Remote Mirror Nut. Used, $15 + shipping. Payment via US Postal Money Order Only! Shipping: US Address Only!
Call Steve 810-629-1097

Mirror Nut.jpg (206 downloads)
72-78 A, B, C, E, Body Pair Of Chrome Fender Turn Signals [Re: Memongo] #3282339
01/12/25 09:36 PM
01/12/25 09:36 PM
Joined: Dec 2012
Posts: 4,759
Fenton, MI
Memongo Offline
Parts peddler
Memongo  Offline
Parts peddler

Joined: Dec 2012
Posts: 4,759
Fenton, MI
72-78 A, B, C, E, Body Pair Of Chrome Fender Turn Signals, Used, $75 + Shipping. Payment via US Postal Money Order Only! Shipping: US Address Only!
Call Steve 810-629-1097

1965-1976 A body Front Spindle Lock Nut Kit [Re: Memongo] #3282340
01/12/25 09:37 PM
01/12/25 09:37 PM
Joined: Dec 2012
Posts: 4,759
Fenton, MI
Memongo Offline
Parts peddler
Memongo  Offline
Parts peddler

Joined: Dec 2012
Posts: 4,759
Fenton, MI
1965-1976 A body Front Spindle Lock Nut Kit. Used, $6.50 + Shipping, Payment via US Postal Money Order Only! Shipping: US Address Only!
Call Steve 810-629-1097

Spindle Lock Nut Kit.jpg (205 downloads)
A Body Rear Window Defrost Blower Motor [Re: Memongo] #3282342
01/12/25 09:38 PM
01/12/25 09:38 PM
Joined: Dec 2012
Posts: 4,759
Fenton, MI
Memongo Offline
Parts peddler
Memongo  Offline
Parts peddler

Joined: Dec 2012
Posts: 4,759
Fenton, MI
A Body Rear Window Defrost Blower Motor. Used, $75 + Shipping. Payment via US Postal Money Order. Shipping: US Address Only!

Call Steve 810-629-1097

1971-78 Dodge Plymouth Chrysler Cruise Control Lever 3746518 [Re: Memongo] #3282343
01/12/25 09:39 PM
01/12/25 09:39 PM
Joined: Dec 2012
Posts: 4,759
Fenton, MI
Memongo Offline
Parts peddler
Memongo  Offline
Parts peddler

Joined: Dec 2012
Posts: 4,759
Fenton, MI
1971-78 Dodge Plymouth Chrysler Cruise Control Lever 3746518. Used, $50 + Shipping, Payment via US Postal Money Order Only! Shipping: US Address Only!
Call Steve 810-629-1097

Cruise Control Lever.jpg (236 downloads)
72-76 A Body Rear Marker Light [Re: Memongo] #3282345
01/12/25 09:40 PM
01/12/25 09:40 PM
Joined: Dec 2012
Posts: 4,759
Fenton, MI
Memongo Offline
Parts peddler
Memongo  Offline
Parts peddler

Joined: Dec 2012
Posts: 4,759
Fenton, MI
72-76 A Body Rear Marker Light. Used $10 + Shipping. Payment via US Postal Money Order Only! Shipping: US Address Only!
Call Steve 810-629-1097

72-74 Rear Marker 2.jpg (296 downloads)
7-76 A Body Trunk Deck Lid Latch [Re: Memongo] #3282346
01/12/25 09:41 PM
01/12/25 09:41 PM
Joined: Dec 2012
Posts: 4,759
Fenton, MI
Memongo Offline
Parts peddler
Memongo  Offline
Parts peddler

Joined: Dec 2012
Posts: 4,759
Fenton, MI
67-76 A Body Trunk Deck Lid Latch, Used, $10 + shipping. Payment via US Postal Money Order Only! Shipping: US Address Only!
Call Steve 810-629-1097.

67-76 A Body Black Front Kicker Panel #1-2663129, #1-2663128 [Re: Memongo] #3282347
01/12/25 09:42 PM
01/12/25 09:42 PM
Joined: Dec 2012
Posts: 4,759
Fenton, MI
Memongo Offline
Parts peddler
Memongo  Offline
Parts peddler

Joined: Dec 2012
Posts: 4,759
Fenton, MI
67-76 A Body Black Front Kicker Panels #1-2663129, #1-2663128, Used, Both Panels $60 + Shipping, Payment via US Postal Money Order Only! Shipping: US Address Only!
Call Steve 810-629-1097

68-69 440 Unsilenced Air Cleaner With K&N Filter [Re: Memongo] #3282349
01/12/25 09:43 PM
01/12/25 09:43 PM
Joined: Dec 2012
Posts: 4,759
Fenton, MI
Memongo Offline
Parts peddler
Memongo  Offline
Parts peddler

Joined: Dec 2012
Posts: 4,759
Fenton, MI
68-69 440 Unsilenced Air Cleaner With K&N Filter. Used, $275 + Shipping. Payment via US Postal Money Order. Shipping: US Address Only!
Call Steve 810-629-1097

68-69 Air Cleaner.jpg (289 downloads)
67-69 A Body Dart Hood Front Trim [Re: Memongo] #3282351
01/12/25 09:45 PM
01/12/25 09:45 PM
Joined: Dec 2012
Posts: 4,759
Fenton, MI
Memongo Offline
Parts peddler
Memongo  Offline
Parts peddler

Joined: Dec 2012
Posts: 4,759
Fenton, MI
67-69 A Body Dart Hood Front Trim, Used, $100 + Shipping, Payment via US Postal Money Order Only! Shipping: US Address Only!
Call Steve 810-629-1097

Holley 4749-2 Carburetor Factory 383-440 [Re: Memongo] #3282354
01/12/25 09:47 PM
01/12/25 09:47 PM
Joined: Dec 2012
Posts: 4,759
Fenton, MI
Memongo Offline
Parts peddler
Memongo  Offline
Parts peddler

Joined: Dec 2012
Posts: 4,759
Fenton, MI
Holley 4749-2 Carburetor Factory 383-440. Used, $125 + Shipping. Payment via US Postal Money Order Only! Shipping: US Address Only!
Call Steve 810-629-1097
Note: Came Off A 70 RT/SE 383 Challenger

Re: For Sale - Parts - A Body - 1st Quarter [Re: moparts] #3282436
01/13/25 10:12 AM
01/13/25 10:12 AM
Joined: Jan 2006
Posts: 4,087
ct.
M
moparlouie Offline
master
moparlouie  Offline
master
M

Joined: Jan 2006
Posts: 4,087
ct.

NOS 67-69 Plymouth Fullsize hub caps. Fit A and B body cars. Roadrunner/Dart/Satellite. $500 shipped in lower 48. lafrancebiglou@aol.com

100_7230.JPG (263 downloads)
100_7232.JPG (262 downloads)
100_6784.JPG (263 downloads)

Have been a member for years!
Re: For Sale - Parts - A Body - 1st Quarter [Re: moparts] #3283111
01/16/25 08:50 PM
01/16/25 08:50 PM
Joined: Aug 2003
Posts: 16,225
oak park, il.
D
dsd70bee Offline
I Live Here
dsd70bee  Offline
I Live Here
D

Joined: Aug 2003
Posts: 16,225
oak park, il.
Mopaqr 1967 A-body 383 & B-body 440 round unsilenced air cleaner base plate & lid, excellent used condition, very rare & hard to find part $750.00 (708) 288-2879

parts 1-16-2025 019.JPG (159 downloads)
parts 1-16-2025 020.JPG (158 downloads)
parts 1-16-2025 021.JPG (157 downloads)
parts 1-16-2025 022.JPG (158 downloads)
Re: For Sale - Parts - A Body - 1st Quarter [Re: moparts] #3283331
01/17/25 11:40 PM
01/17/25 11:40 PM
Joined: Jun 2023
Posts: 14
Jackson,tn
J
Jwise Offline
member
Jwise  Offline
member
J

Joined: Jun 2023
Posts: 14
Jackson,tn
A body 14" hub caps. Nice shape. 100.00 plus shipping can't seem to attach pics so send me an email address and I'll respond.

Re: For Sale - Parts - A Body - 1st Quarter [Re: moparts] #3283333
01/17/25 11:48 PM
01/17/25 11:48 PM
Joined: Jun 2023
Posts: 14
Jackson,tn
J
Jwise Offline
member
Jwise  Offline
member
J

Joined: Jun 2023
Posts: 14
Jackson,tn
TTI a body to late hemi mounts. New 130.00 shipped ground.

20250112_105809.jpg (23 downloads)
20250112_105752.jpg (23 downloads)
Last edited by Jwise; 01/19/25 09:35 PM. Reason: Added pics
70-72 DART PARTS [Re: Jwise] #3283657
01/19/25 07:30 PM
01/19/25 07:30 PM
Joined: Aug 2003
Posts: 835
BRIDGEWATER, CT.
WINGNUT Offline
super stock
WINGNUT  Offline
super stock

Joined: Aug 2003
Posts: 835
BRIDGEWATER, CT.
From a 1971 Dodge Dart 2 door, black door panels with wood grain, nice condition except drivers door panel cardboard backing is cracked, but usable, $75 set. Clear rear window, with gasket, $100. Door window regulators $50 each. Quarter panel extensions, $40 ea., Dash frame,$50, Ash tray assembly, $30. Glove box, $45, Wiper transmission, $50, arms,$40. Stainless trim, holds door panels on, $75 set, right side headlight bezel, $30. Front bumper brackets, $100. Black steering wheel, $100. K-frame to radiator support bracket, $25. Shipping extra. No Paypal. U.S. money order only. VEIGHTPETE@GMAIL.COM

Re: For Sale - Parts - A Body - 1st Quarter [Re: moparts] #3283672
01/19/25 09:39 PM
01/19/25 09:39 PM
Joined: Jun 2023
Posts: 14
Jackson,tn
J
Jwise Offline
member
Jwise  Offline
member
J

Joined: Jun 2023
Posts: 14
Jackson,tn
Hellwig swaybar kit fits a bodies 73 and newer. 1 1/8" hollow bar with all hardware,bushings and instructions in the original box. 200.00 contact me with any questions or for pics.

Page 1 of 3 1 2 3






Powered by UBB.threads™ PHP Forum Software 7.7.1