Pair of A Body Tubular Upper Control Arms. Heim Joints and Ball Joints are perfect and ready to install. I had brackets welded on to attach travel limiters. These arms were in my car for a very brief period of time due to a change in plans. $350. rich1981@optonline.net SOLD

Wilson Manifolds 4500 to 4150 low profile adapter.
$150

Wilson Manifolds 1.5 inch 4 hole tapered spacer for 4150 #004130
$150


ATI Super Damper #917467E BB Mopar. $225

Thanks Moparts

Buyer pays shipping

A pair of Weld Magnum 2.0,15" fronts. Good condition. One wheel has a slight wobble. $500 + shipping for the pair.

Mopar performance P4876548 high performance SB water pump.

Radiator connection tig welded to clear large fuel pump

$385 obo

thanks

rapid340@yahoo.com

Super nice Holley double pumper 4 bbl 4776 classic

These are around $750 (plus tax) new

$385

thanks

NOS Mopar Performance intake manifold

large port intake for use with W5 or similar heads.

$485

thanks

rapid340@yahoo.com

The mufflers are brand new and were out the boxes for fitting only.

$160 for the pair plus shipping or pick up.

Thanks

These Carbs came with the engine I had built, and they are basically brand new with only engine run in time. They come with Carb Kits from AED and Quick Fuel Adjustable Secondaries.

$1380 for the pair plus shipping. ****SOLD****

Thanks

Driveshaft Loop was new, bolted it up on car, decided to do something different.

$70 plus shipping. **SOLD**

Thanks

Wilwood Brake Proportioning Valve===as you see it , just the valve.

$25 plus USPS shipping from Syracuse NY

Pay Pal only. Shipping will be USPS Flat Rate or being a smaller item maybe just first class.

2 Book Racing Carbs,1250-1500 CFM .,,,,,,,2500 OBO,,,,,,,,,,,,,,,,,,C&R racing radiator 22X13 with extras,,,,,750.00,,,,,,,,,,,,,,Complete dry sump oil system,1250.00,,,,,,Coan racing trans,,turbo 400,..4500 stall,,,,make offer,,,,all parts have about 2 hrs run time on them,,,,,COMPLETE motor setup,disassembled is available,,heads have damage,,block,pistons,ect good shape....St Louis area.....,,message me for pictures

.940 A body Torsion Bars for sale. New, never used. Purchased from Firm Feel a few years ago. Shown on their site as H/D - Police usage. (WR155) TBA3 . Listed for $500. $350 negatable plus shipping in their original box. Possible delivery assistance in Lower Michigan area. Contact me thru Moparts.

I have a good pair of 572-13 heads, Jesel rockers kit and matching CFE 2x4150 sheet intake WITH linkage. Ti 2.3 coated intakes and Ti 1.88 exhaust. Set up made over 900HP on a 452 RB about 20 years ago. Need an exhaust valve job and springs. I can finish them to your liking for extra money. I was going to use these to make 1050HP with some tune-ups and bigger cam but have Predator heads now. These will push a 3200# car solid into the 8's as-is at a nice low rpm. (bracket) Chambers are about 66cc now and can be milled further. $3800. (Heads and Intake PENDING) I have two fresh and matched '950' HP carbs, tuned well on my last motor $1400 with package. 55mm 4/7 swap cam about .790' NET lift with heads $425 with package. New 572-13 CP 4.507" 1.2 C/H pistons with rings/ latest tricks $1800 with package. Good stuff! Heads were painted and I'll detail/clean them when purchased. Decks are good currently. Contact thru Moparts Thanks!

* 3" x 7/8" T-Bolt exhaust clamps from TTI kit made by Five Star MFG. 11 new, 1 used (Range approx. 3" - 3 1/4")
Bands are stainless, bolts are plated.

* 3' standard exhaust pipe clamps - 2 new

All for $55.00 including shipping within the 48 states from Florida 32117.

Sorry, no PayPal.

locomo@bellsouth.net

Lead Shot bags & loose - Race car ballast, fishing, scuba, etc.....

* Lead shot nylon bags - 2lb - 5lb range - 61lbs+ total

(Contrary to the tags, a few are off by as much as a pound, but total is 61lbs+)

$225.00 including Priority Flat Rate shipping within the 48 states from Florida 32117

(Would prefer to ship to a business address which may make it easier to deliver and accept at that weight.)



* Lead shot - loose in bag 23lbs+ total

$45.00 including Priority Flat Rate shipping within the 48 states.from Florida 32117


Sorry, No PayPal.

locomo@bellsouth.net

65 up b body milodon pan. Outer finish is pretty much wore off, inside is good. I never used it. But appears to not be any damage that would prevent good use. No pickup included. 9.375" deep inside. $300 plus shipping. Can send more pictures, it says my others are to big

SOLD SOLD:::::;::::Good rockers I used in the past and have been on the shelf. Some adjusters are different lengths where some got changed, could use some new locking nuts. Definitely usable if wanted to. $200 plus shipping SOLD SOLD

TCI Super Street Fighter big block Mopar transmission upgraded with CRT reverse manual valve body. Works perfect. TCI rates this unit up to 750 hp.
Pick up only in Warren Mi. NO SHIPPING

$1999
PM or John 586-222-2728 jonburdine@yahoo.com

Edelbrock #2920 Victor W2 Rectangular port intake manifold in good condition.

$250 + ship. *******SOLD*******

PM or GTX5877@yahoo.com

ARP Pro Series Cylinder Head Studs #144-4202 for SB Mopar with W-2 cylinder heads. 12 point nuts, washers and 8740 studs. Over $200 new. Sell for $100 + shipping from 56007

Private message