For sale is a "NEW" in the box Holley HP Billet adjustable fuel pressure regulator. Part number 12-846. EFI applications. Bypass style. Adjustable from 15-65 PSI. -8AN o-ring inlet. -8AN o-ring outlet. -6AN o-ring return. $160 shipped in the 48 states. PM if interested.

https://www.jegs.com/i/Holley/510/12-846/10002/-1

For sale: Autometer Sport Comp II tachometer and gauges. Included are a 3690 tachometer with shift light and 3692 volt, 3637 water temp and 3627 oil pressure gauges. The gauges are all electrical gauges. I bought these for a car I used to own but sold the car before ever using them. I've been hanging on to them in case I bought another car but I don't think that's going to happen so I have decided to sell them. $450 for everything. Selling as a package only. No Paypal. gt340 at yahoo.com

https://www.summitracing.com/search?SortBy=BestKeywordMatch&SortOrder=Ascending&keyword=3690
https://www.summitracing.com/search?SortBy=BestKeywordMatch&SortOrder=Ascending&keyword=3692
https://www.summitracing.com/search?SortBy=BestKeywordMatch&SortOrder=Ascending&keyword=3637
https://www.summitracing.com/search?SortBy=BestKeywordMatch&SortOrder=Ascending&keyword=3627

For sale is a Howard's solid flat tappet cam for Mopar big blocks, part number CL722322-08. See links below for specifications. I bought this cam for my engine with the intention of taking the car to the track when the car was finished being restored along with the engine being built but I have changed my mind about racing the car and decided to go with a milder hydraulic cam instead. I had this cam installed in my engine on the engine stand but it never was run and is essentially new. $375 + shipping or I can deliver to the Nats if paid for in advance. I also have a new set of Comp Cams inner valve springs I was going to use with this cam and Edelbrock RPM heads that I am asking $45 for.

https://www.summitracing.com/parts/HRS-CL722322-08

https://www.howardscams.com/mechanical-flat-tappet-camshaft-lifter-kit-1959-1980-chrysler- show contact info -7600-howards-cams

https://www.summitracing.com/parts/cca-973-16

gt340 at yahoo.com

FALL GARAGE SALE

Thank you Moparts for the Ad
Time to get somethings out of the garage to someone who can use them. Prices reduced!
All items plus shipping from 61073 unless noted
Ship or can meet within 35 miles of Rockford, IL
Cashier's Check or Money Order


Pair Rancho RS99116 Single Adjustable Rear Shocks 16-1/2" to 22-1/2" Eye to Eye - $80
Moroso 65961 Air Pan Kit for 4500 Dominator - New in Box $10
Fiberglass (Not Plastic) Racing Seat with Cover You need this for your Gasser Build! - PICK UP ONLY - $40 or best offer

Please message me on the Board
Thanks for looking, John

Afco 3855m Eliminator front shocks . Single adjustable. Used for one season. $300 plus shipping from 70072. Cashiers check, postal money order.

Used set of Edelbrock performer RPM heads with hyd springs. $800 plus shipping from 70072. Cashiers check, or postal money order

BRAND NEW, NEVER RUN MOPAR PERFORMANCE PISTON/PIN/RING PACKAGE !!!


360 Small Block


4.030 Bore 3.580 Stroke


Most likely Mopar sourced all of their pistons from Diamond, which I believe to be the case here.


750.00 for the set. Price is firm. Shipping is additional. PayPal preferred. Current replacement approximately 1100.00.


Bill Rolik


bremotorsports@verizon.net


201-394-5533 Cell/Text

Fits both big and small blocks. One bolt hole has been elongated so it fits early and later vibration dampers. $40 shipped in U.S. NO Paypal. U.S. check or money order only. VEIGHTPETE@GMAIL.COM


Crankshaft Pulley:
P/N BCRL1CR
Grooves: 1
Diameter: 5.2"
Overall Length 2.3"
Bolt Pattern: 6 Bolt
6061-T6 Billet Aluminum
Made in the USA

Links:
https://www.weldonracing.com/store/1100-A-p56062401
https://www.weldonracing.com/store/A2040-Series-Bypass-Regulators-p56722017
Brought new 7/1/2022, used for 1 chassis dyno session, went in another direction. Fogged with Marvel Mystery Oil and put on shelf. Time to sell.
500.00$, Shipped lower 48 only.

PM me

CR12B early B-body fuel tank, has sump box welded in, sump box is about 1" below tank with 4" to 5" tall inside tank. Tank was coated inside and out by a company called Tank Renu. here is a link.
https://www.gastankrenu.com/
Also has Aeromotive fuel filter with -10 outlet, -8 return,-6 vent. Also, can use a stock pickup, I have a new one to go with it. to plug the hole where it goes.
400$
Prefer local pick up, will ship at buyer's expense, I think it would be pretty expensive though.
Located in Kansas City area.
Pm if interested.

8 Autolite Spark plugs AR3910 New never needed. $25 shipped US

BRAND NEW billet big block oil pump cover for a remote oil filter. Machined for external pickup for either hemi or wedge but I believe can be used with internal pickup if the external pickup hole is plugged. Pickup fitting is 12an, remote fittings are 10an $200.firm plus the ride

Remote dual oil filter kit, 10an fittings and 3' of hose - brand new $80 firm plus the ride

Earls 12an screen type inline oil prefilter (for external p/u line) p/n 230312ERL - brand new $50 firm plus the ride

All prices in US $$ Parts located in Ontario, Shipping anywhere not an issue. Paypal F&F

More photos available but could only post 4 here

Used MSD 2-Step Part#8739. Asking $40.00 plus shipping. Located in Ohio 43612. PM if interested

I have a new PRW 1.6 ratio roller rocker arm kit containing all parts needed to install these rocker arms including steel bushed rocker arms, rocker arm shafts, spacers, shims, adjusters, steel shaft hold downs and hold down hardware. This kit is new in the box and is PRW part # 3231812.

Price is $500 shipped in the lower 48 states.

I will ship internationally for the additional shipping cost.

Email me at procketrichard@hotmail.com with any questions or for more pictures.

I have 11 pairs (one complete engine set plus 3 spare pairs) of new Mopar Performance solid roller lifters for small block still in their packages. Part number is P5249584. The roller wheel size is ~ 0.80”. The Mopar catalogue lists them for race blocks. See the included picture from the 1997 Mopar Performance catalogue for the description.

I fit these into my stock 340 block and they fit in nicely. On my block, the block required very minor grinding to a very small spot in the raised section of the valley to allow two of the eight lifter pairs to slide in. Contact was in the center of the link bar.

The price for the 11 pairs is $650 shipped in the lower 48 States. I will ship internationally for the added cost.

Email me at procketrichard@hotmail.com with any questions or for more pictures.

I have a new SCAT forged rotating assembly for 360 & 5.9 Magnum Mopar engines. All parts are new high-quality parts. Final cubic inches will be 408”.
The assembly includes the following parts.

• SCAT forged 4.000” crankshaft part # 4-360-4000-6123
• SCAT forged H-beam connecting rods with APR 2000 bolts part # 2-360-6123-2124A
• Diamond Forged flattop 4.030” bore pistons (0.030” oversize) part # 51026
• Trend wrist pins - 0.984” part # TPD-G9842750155
• Diamond wrist pin locks
• Mahle file fit ring set with Moly ductile iron top rings part # MAH4035MS
• Speed Pro Tri metal Competition Series rod bearings part # 8-7125CH
• Clevite P-Series full groove main bearings part # MS-1266P

If you are looking for a 360 stroker with lower compression, I can substitute the pistons and connecting rods for new SRP 4.030” dished pistons part # 220156 (16.9 cc piston head volume) and new Eagle H-beam rods part # CRS6123C3D (360 stroker assembly only).

These rotating assemblies will need balancing.

The price for this complete kit with the Diamond flat top pistons and SCAT rods is $2,750 plus shipping cost.

The price for this complete kit with the SRP dished pistons and the Eagle H-beam rods is $2,600 plus shipping cost.

I also have a similar stroker assembly for a 340 with new Diamond 4.060” (0.020” overbore) flat top pistons, Perfect Circle file fit ring set with Moly ductile iron top rings part # 315-0036.065
and Speed Pro Tri metal Competition Series rod bearings part # 8-7125CH. Displacement would be 414 ci. This rotating assembly will need balancing.

The price for the complete 340 kit is $2,750 plus shipping cost.

I can also meet in CT.

Email me at procketrichard@hotmail.com with any questions or for more pictures.

I have a new SCAT forged rotating assembly for 340 Mopar engines. All parts are new high-quality parts. Final cubic inches will be 414”.
The assembly includes the following parts.

• SCAT forged 4.000” crankshaft part # 4-340-4000-6123
• SCAT forged H-beam connecting rods with APR 2000 bolts part # 2-360-6123-2124A
• Diamond Forged flattop 4.060” bore pistons (0.020” oversize) part # 51028
• Trend wrist pins part # TPD-G9842750155
• Diamond wrist pin locks
• Perfect Circle file fit ring set with Moly ductile iron top rings part # 315-0036.065
• Speed Pro Tri metal Competition Series rod bearings part # 8-7125CH
• Clevite P-Series full groove main bearings part # MS-1344P

This rotating assembly will need balancing.

Price for this complete kit is $2,750 plus shipping cost.

I can also meet in CT.

Email me at procketrichard@hotmail.com with any questions or for more pictures.

I have a new set of forged I beam connecting rods by Childs & Albert in the original box. American made in the 1990’s. Part number is 340-15B-2. Center to center length is 6.125”. Big end is for rod journals of 2.125” (small block Mopar) and small end is for wrist pins of 0.927”. Weight per rod is ~ 685 grams. See spec card in the pictures.

These are very stout rods, suitable for a high horsepower build.

Price is $850 shipped in the lower 48 states. I will ship internationally for the added cost.

Email me at procketrichard@hotmail.com with any questions or for more pictures.

New Mopar Performance W2 /W5 exhaust roller rockers. I have quite a few of these so if you need more than one just ask.

Price is $40 each shipped in the lower 48 states.
Set of eight rockers is $280 shipped in the lower 48 states.

I will ship internationally for the additional cost.

Email me at procketrichard@hotmail.com with any questions or for more pictures.