67 Coronet passenger side fender wanted, (also 500 body trim) need a very nice no rot piece closer the better to Connecticut the better but will pay for the right one! thanks. lafrancebiglou@aol.com

WANTED 1968-70 Dodge Charger rally dash amperage gauge 2857 169 NOS MOPAR only. Bob Horm,an

Wanted: Plate/Fuel Filler Surround, part number 3754408 for 1975-1978 Fury/Monaco/Coronet 4-door sedan. NOS, or near NOS condition.

Wanted: I need an original set or at least the original top pieces of the interior rear window trim for a 1969 Dodge Coronet. They should have a ribbed finish on them. (See photo)

I am looking for a dual point distributor for a 4 speed car part number is:

2875981
IBS-4014C

This is for an A12 4 speed car.

Thanks,
Tom

In need of roof rail/drip rail moldings for a non vinyl top 1971 Charger. If anyone can help please send me a private message, Thank You!!

WANTED: 1970 Plymouth GTX

Looking for a real RS vin with fender tag 1970 GTX. I DO NOT WANT a numbers original matching car. Looking for a running driving car, does not need to be restored, but preferred to be all there or close to all there. Can need normal body work etc, but should still be drivable if possible. Will consider projects and possibly basket cases. MUST have Title (or owner willing to get one prior to sale) and Fender Tag. I'm in Western PA (Pittsburgh, PA area) so closer the better, but I will entertain any where for the right car that fits my needs and planned project.

Send pictures, price, and location to derek@consolidated-displays.com

Looking for aluminum trim that follows the body line from front to rear for a 72 satellite sebring plus. Full sets or individual pieces. Specifically looking for passengers side rear. But interested in full sets also.

Looking for a nice 68 Satellite 5 piece plastic upper dash trim set. Will consider 69 set also. PM me with info. Joe

WANTED 1968-70 Dodge Charger ORIGINAL MOPAR exhaust tip hangars. Bob H

WANTED!

I have a ‘69 Road Runner factory N96 Air Grabber Hood car and I’m missing the under hood airbox parts. Does anybody have these in any condition? Thank you! Eric

***Here is a picture of what I need***

WANTED 1968 B Body radiator for 426 hemi. Mopar part number 2098 048. rebuildable condition and top tank rebuildable. Bob Horman

Need in good condition the belt line trim molding that goes along quarter window and door windows for 70 Plymouth b body post car. Darriswynn383@icloud.com

WANTED 1971 1972 road runner standard hood with call outs near arizona area. also looking for a roof section to repair rust damage from vinyl top 815 520 3227 rich text me first and i call you back crazy world scammers out there you understand thanks.

In need of 1964 Plymouth Sport Fury Power Brake Booster. Must be a functional booster.

I’m looking for a nice driver quality Road Runner, 1968 to 1970. Will travel for the right car, will consider a project car that is all there.

Thank you! Eric

WTB 70 roadrunner left side taillight lense,looking for a nice used lense pm if you have one

....I'm looking for a 1966 Coronet 440 R or L side aluminum 1/4 panel molding for a 2 door car. This is the long single piece molding.

Please e-mail me at azvcmc69@gmail.com or text me at 520-429-3211

Looking for the quarter panel recessed area where the flip open gas caps sets from a '68-'70 Charger. If you cut off an old rusty quarter panel or have a parts Charger with this still on it, I'm interested in it. All I need is the round area and about 2-3" of the quarter panel metal around it. Thanks. detrick12220@atlanticbb.net

1971 Charger R/T:

* Looking for specifically the two interior rear trim panels - the padded upper ones. Black. Also could use a driver's door one as well. Must be nice!
* Also need a front driver's kick panel in black.
* Could use the rear interior sail trims in the hard plastic as well.

I know these items are available as reproductions, but I'd rather have nice OE ones.

WANTED:

For a 1971-4 Charger: Looking for a small patch panel area in front of each rear wheel. Obviously, no rust, so someone from the SW US with a car with damaged quarters. I need these patches basically cut up to the lower body line & about 12" forward of the wheel opening, with a little bit of the outer wheel tub. My car is a '71. Multiple contours down there including the lip at the wheel opening would be difficult to shape - I'd rather have some good OE patches.

[b][/b]Greetings,

looking for a set of 413 inline 2x4BBL air cleaners for sale.

Contact me at: magnumforce440@comcast.net

Thanks!

Wanted 65 poly 318 throttle bracket with automatic transmission
Thanks

WANTED 1968 Dodge Charger Street Hemi stuff. Radiator 2898 048 any condition. rear carburetor 4432 S. Power steering hose 2857 980. Steel wheels 15X6 JK. starter- automatic transmission heat shield. NOS MOPAR Chrome PARTS 1968 Dodge Charger. any useable under the hood parts mechanical. Bob Horman

WANTED: Center Road Runner insert for 1971 Road Runner steering wheel. I recently purchased a black wheel, but it's missing the center medallion. I have what I need circled in the picture.

PM me here with condition and price.

Thanks!