1971 Charger R/T:

* Looking for specifically the two interior rear trim panels - the padded upper ones. Black. Also could use a driver's door one as well. Must be nice!
* Also need a front driver's kick panel in black.
* Could use the rear interior sail trims in the hard plastic as well.

I know these items are available as reproductions, but I'd rather have nice OE ones.

WANTED:

For a 1971-4 Charger: Looking for a small patch panel area in front of each rear wheel. Obviously, no rust, so someone from the SW US with a car with damaged quarters. I need these patches basically cut up to the lower body line & about 12" forward of the wheel opening, with a little bit of the outer wheel tub. My car is a '71. Multiple contours down there including the lip at the wheel opening would be difficult to shape - I'd rather have some good OE patches.

[b][/b]Greetings,

looking for a set of 413 inline 2x4BBL air cleaners for sale.

Contact me at: magnumforce440@comcast.net

Thanks!

Wanted 65 poly 318 throttle bracket with automatic transmission
Thanks

WANTED 1968 Dodge Charger Street Hemi stuff. Radiator 2898 048 any condition. rear carburetor 4432 S. Power steering hose 2857 980. Steel wheels 15X6 JK. starter- automatic transmission heat shield. NOS MOPAR Chrome PARTS 1968 Dodge Charger. any useable under the hood parts mechanical. Bob Horman

Wanted....63 to 65 small block motor mounts

Wanted 63 to 65 motor mounts

Looking for a good 72 Charger Big block radiator, not sure of the part number It was built in Dec of 71 Needs to have good non dented tanks for a re-core if needed. If you know the part number it would be appreciated.

John Chaney
Johnmn420@ol.com
952-239-6883