two , (2) OEM 3461222 trim rings, These are the brushed, 15" X 3"rings. they need restored! Have some curb rash!

$200.00 plus shipping.

Correct center carb for AAR, or T/A four speed car. 4791, dated 0480. good condition

$800.00 plus shipping

I have 1 restored muffler bracket in bare metal steel with
original rubber insulator with part#.

Its been cleaned with evaporust and rust protected with
rustprotective wax.

Asking $160 USD including shipping from Sweden.

Payment thru paypal.

Pm me here or email:
Nicklas-780@hotmail.com

Thanks
Nicklas

E body seat track set. Two of the studs are short. One of the nicest sets I have ever had. $350. Can bring to Columbus. 814-603-3926

I have an original AAR hood that is in nice condition. It has the typical stress cracks by the hinge areas. I was thinking of trading it for an original Road Runner A12 hood, or just selling it outright.

I am not wanting to ship this but could possible meet up somewhere to exchange. I would possibly consider original gas and oil signs or original six pack carbs in trade also.

$2100.00 from 55092 St Paul, MN

PM for details and more pics

Thanks

All never been used, most in their packages
There are 8 of them
3 - Philips 4578
2 - GE 4000/01
2 - Westinghouse 4001
1 - Sylvania 4000

$40 USD for all eight plus shipping, for now I will not break up (unless you make it worthwhile LOL)
Shipping from Ontario Canada L0S1E4
PM me here for more details

NOS Mopar 438517 Single Point Distributor

71 340 Automatic Trans

Earlier date code tags are available.

This is the best of the best!

I will have this unit at the Mopar Nationals.

250.00 plus shipping if not in attendance at the event. PayPal preferred. SOLD! SOLD! SOLD!


Bill Rolik

bremotorsports@verizon.net

201-394-5533 Cell/Text

Mopar Nationals Spaces O27-O31

Howdy, this is my first post here on Moparts, thanks for the add.

I’ve got lots of E, B, and some A body parts, this is my current inventory of E-body parts I’m looking to sell:

1970 Challenger 6 pack fiberglass T/A hood (aftermarket) -$1200
1970 Challenger seat (1 front seat, needs recovered but in decent condition) -$600
X3 plastic seat backs for 70 Challenger seat -$150 each
8 3/4 axle housings X2-$300 each
8 3/4 full rear end assembly (not sure on gear ratio, will get soon)

Several K frames In various conditions and completeness.

E body rear leaf springs with offset hangers for B-body axle housing.

PM me or email me masoncox2003@gmail.com. I’m located in Texas and don’t really want to ship anything, but message me and we can work something out. Im still figuring out posts, and listings so patience is appreciated.

Here is a partial list of parts going to the mopar Nationals....spaces D6-7 and E6-7:
-restored Cuda roadlamps.........$850/pr
-NOS 1972-4 bolt in pistal grip handle in box 3467732 (the plastic grips have been replaced with reproduction grips, the rest is excellent original nos)....$650
-NOS correct early straight cord microphone in the box # 3501534...$200
-NOS 1970-71 electric windshield washer reservoir #3431074.......$275
-NOS late 70-1971 440-6 CH803 vacuum advance.......$275
-NOS 2875400 69-71 voltage regulator correct with "bump".....$ 225
-NOS 1970 only Cuda fender top turnsignal housing 3403140........$75
-NOS 70-71 3 speed wiper motor pivot 2822289....$135
-NOS 69-71 383-440 hp heat riser pkg 3420046.....$200
-NICE original 1970 only Cuda gas cap....$475
-NOS 70-71 Cuda hood catch 2945845....dated 338 9 or 338th day of 1969...great date.....$300
-NOS 1970 Cuda only hood release through grill.....$325
-NOS amber roadlamp bulbs in the boxes GE say "FOG"....$125/pair
-NOS shaker drain hose 3512778.......$250
-NOS 1970 Cuda / Challenger only power steering pitman arm....$425
-NOS 1970-74 passenger side door seal 2895478.........$500
-original mint space saver spare bottle (empty) with reproduction label....$425
*more items, convertible parts,lenses and assemblies all 1970-71 Cuda
Thank you,
Jim
716-997-0070

bakurruda@aol.com

AAR Cuda or TA Challenger Power Steering Box

Condition is unknown, selling as is. **SOLD**

Barn-fresh Cuda/Challenger convertible top frame. Has been in storage since 1994.

Complete except for the weatherstripping retainer on the header panel.

Header is decent, mechanism operates smoothly, all side weatherstrip retainers are present, top cylinder retainers are present (both sides).

$2700 with free delivery to Moparfest as long as it is presold. If it is not presold, I will not have room in my vehicle to bring it on spec.

Shipping available.

PM me on the board

Thanks!

1970 Challenger Cuda 440HP carburetor manual transmission, part number 4737, dated 8-1969, very nice original condition, $1200.

I also have a 1970 4737 carburetor dated 11-1969 if that date works better for your build date.

Email Kenei@comcast.net

Located in NJ.

Original 1970 Challenger Cuda AM 8 Track radio, very nice chrome on the wheels - push buttons - bezel, chrome is not peeling on the wheels and buttons as usual, all buttons and wheels work properly, the wiring had insulation removed and should be replaced, 8 track drive belt not broken, very nice original AM 8 Track radio, SOLD

Email Kenei@comcast.net


SOLD Thanks Moparts

N.O.S. FACTORY ORIGINAL DASH VIN RIVETS.... NOT the aftermarket pieces that do not pop correctly and wrong color.and size. these are as old as your car and the only correct rivets available. if you care about having the right parts on your high priced mopar get originals. $100 a pair plus shipping paypal fastest way to pay. or postal money order. any question contact 815 520 3227 text me or call please. 8 am to 8pm arizona time. send. me your zip code for a shipping price
815 520 3227

70-71 B5 Blue Hardtop Sun visor set. Complete. Good shape, survivor. $200

72-74 Green Hardtop Sun visor set. Complete, Really good shape. $110

72-75 R/H Challenger Rallye Fender Scoop. No insert or nuts. All studs intact passenger side. $60

70-74 Hood Latch Plate. Great shape. $30

71-74 Non Rallye, A/C heater control bezel. Working vent, great original paint. See photo below $85

71-74 Slap Stik shifter with intermediate linkage, washers, pins and original bushing. $100

70-74 Ashtray Light. Looks and works good/well. $45 SOLD

70-74 Interior Dome light housing with wiring and 2 wiring clips. Bright, no dents. $45

1970 Cuda front inner parking light assemblies with lenses, screws and bolts. $185/ set

70-74 Cuda Rallye Hood Scoop. Left hand, drivers side, no insert. All studs intact. $90

1970 Cuda Tail Light Lenses with chrome bezels. No body trim, good shape, right and left sides, will all polish up fine. $150 all 4 pieces.

NOS Mopar ICU Chrome P4120534 High Performance Ignition Control Unit. Factory sealed. $200- SOLD

70+74 Cuda Right Hand B5 Blue Armrest with blue plastic pull cup. Really good original, no rips. $40

70-74 Cuda Right Hand Right Hand Gold Armrest. No rips, discolored on two spots, may clean up. $30

70-74 Cuda Right and Left Armrests in black. They've been repainted at some point, mouse got to the tip of one. Good place holders. $28/ pair.

1970-74 Cuda Challenger Door Jamb & 1/4 Glass Window Rubber Seal No Rips Pliable $35/ all 4 pieces with a bonus piece!

1970 Cuda Challenger Automatic Shifter no knob, just the shifter. Missing outer return spring, need a good lube job. $110

1971-74 Challenger Charger Cuda GTX 4 Headlight Bucket Trim Ring Set. All assembled still, includes adjusters, screws, springs, trim rings buckets,and bulbs.. 3 Westinghouse and one GE. $200/all

1970-71 Cuda Challenger Dated Ignition Switch w/ key in buzzer switch. Dated 1450, 1970 manufacture. Great shape, no hot spots, frayed wire or damaged connectors. $70

1970-71 Cuda or Challenger Used Door Weatherstripping. Still soft, clips are all bad, but new ones are cheap. $50/ both sides. SOLD

1972 Cuda Challenger Charger Complete Black Dated Seatbelt set. All covers, clips, bolts and wiring. Good chrome, all retractors and buttons work well. Good for 72-74, but dated April 1971 for a 1972. Some fading on the shoulder belts and the boot of one female front lap belt is torn away at the bottom. Fronts and rears stored away for 20+ years. $500 shipped for free!

Many more parts forthcoming. Cash, Paypal (Friends or add 3%) or USPS money order. Shipping is buyers responsibility and I'm only shipping to the lower 48 of The U.S. Packing is free. All parts listed on auction site, so they could be sold at anytime ebodyparts on the bay.

This is also know as front headliner trim. Has 5 screw holes. No bends. needs repainting. $75 plus shipping. NO Paypal. U.S. money order only. VEIGHTPETE@GMAIL.COM

1969 1/2 A12 440 SIX PACK & 1970 T/A & AAR air cleaner lid, original not reproduction, as you can see in the pictures it has been stripped to bare metal and will need to be repainted, there is some lite pitting that will need to be filled in, selling as is $400.00 (708)288-2879

1970 Dodge Challenger light bar for cars with Rallye instrument cluster, comes with wiring harness, selling as is $450.00 (708) 288-2879

Cleaned up in Evaporust and then painted with Seymour 'Stainless Steel' and black paint.
New brake release handle and nylon stop-bushing.
New primary and secondary springs.
Original brake switch cleaned up and looks like new.
Original pedal stop bumper, reproduction pedal pad.
The often broken and missing stop-tab is still intact, we added a bit of welding to reinforce it to prevent future breakage.
All new mounting hardware.
Original clevis, pin, and retainers.
Nothing missing. Bolt on and go!
*** SOLD ***

In good condition. $1500 and must pick up in Lebanon TN 37087. Email moparmafia@yahoo.com