SUMMER GARAGE SALE

Thank you Moparts for the Ad
Time to get somethings out of the garage to someone who can use them.
All items plus shipping from 61073 unless noted
Ship or can meet within 35 miles of Rockford, IL
Cashier's Check or Money Order

Pair AFCO Leaf Spring Sliders 20236S - SOLD
Pair Rancho RS99116 Single Adjustable Rear Shocks 16-1/2" to 22-1/2" Eye to Eye - $90
Mopar Alternator with Moroso 64840 Large Pulley - SOLD
Autometer 3431 Water Temp Gauge - New in Box - SOLD

Please message me on the Board
Thanks for looking, John

SUMMER GARAGE SALE

Thank you Moparts for the Ad
Time to get somethings out of the garage to someone who can use them.
All items plus shipping from 61073 unless noted
Ship or can meet within 35 miles of Rockford, IL
Cashier's Check or Money Order

New Milodon 18320 Big Block Oil Pickup 7-3/4" - SOLD
Moroso 65961 Air Pan Kit for 4500 Dominator - New in Box $15
Fiberglass (Not Plastic) Racing Seat with Cover You need this for your Gasser Build! - PICK UP ONLY - $50

Please message me on the Board
Thanks for looking, John

Pro Glass 1/8" thick Windows & Innovative Racecraft Lexan Window Mounts for A-Body - Duster, Demon, Dart Sport

Everything is Brand New in their boxes. Brand New, retail cost is $1025.

Buy these! $500 for everything. Shipping Extra.

srrimay@gmail.com or PM me.

Messenger_creation_39ade437-feb2-4425-898e-8091082371f9 by Stephen Rimay, on Flickr


Messenger_creation_71a962f6-cd6a-4b31-bedc-6eac61e50241 by Stephen Rimay, on Flickr

Mopar Manual Steering Box, $150 - Shipping Extra.

srrimay@gmail.com or PM me


Messenger_creation_be23c3cf-6a7c-4d25-91cc-2df374a6ef98 by Stephen Rimay, on Flickr

Links:
https://www.weldonracing.com/store/1100-A-p56062401
https://www.weldonracing.com/store/A2040-Series-Bypass-Regulators-p56722017
Brought new 7/1/2022, used for 1 chassis dyno session, went in another direction. Fogged with Marvel Mystery Oil and put on shelf. Time to sell.
500.00$, Shipped lower 48 only.

PM me

CR12B early B-body fuel tank, has sump box welded in, sump box is about 1" below tank with 4" to 5" tall inside tank. Tank was coated inside and out by a company called Tank Renu. Guaranteed for life, here is a link.
Guarantee - Gas Tank Renu.
Also has Aeromotive fuel filter with -10 outlet, -8 return,-6 vent. Also, can use a stock pickup, I have a new one to go with it. to plug the hole where it goes.
400$
Prefer local pick up, will ship at buyer's expense, I think it would be pretty expensive though.
Located in Kansas City area.
Pm if interested.

This is an 1150 gas Dominator built by IRD carburetors, I pulled the bowls off and checked everything for cleanliness, it’s clean and ready to use depending on your tuning requirements, the documentation for the carb is in the first pic, this is all I know about the carb, it had maybe 10 passes on it after it was bought and was replaced with a 1250 IRD carb, asking 525 shipped and it comes with a 4150 to 4500 adapter if you want it, payment needs to be cash or postal money order only, thanks, pm me here or email me at alilblacktruck@gmail.com

J&W Bell housing to adapt a big block Mopar to a Powerglide, it is brand new and still in the box, transmission builder and I got our wires crossed and both bought one, so this one was not used, included is a used 8 bolt crank adapter and adapter flywheel, both are used but in good condition, I also have a 6 bolt flywheel but no crank adapter to fit it, I can include whichever one you prefer. I’ll take 650.00 obo shipped in the CONUS for both, there not doing any good collecting dust on my parts shelf, pm me here or email me at alilblacktruck@gmail.com, I don’t do pay pal, payment will be cash or US postal money order, thanks, Rob

20 gallon fuel cell, was used very little before I went to a 5 gallon fuel cell, 200 shipped in the CONUS, cash or postal money order only, pm me here or email alilblacktruck @ gmail.com, thanks

Used MSD 2-Step Part#8739. Asking $40.00 plus shipping. Located in Ohio 43612. PM if interested

Rear trailer tie down brackets for most A, B, or E body vehicles (doesn’t fit the 7 ¼ rear axle). These piggyback onto the bottom of the stock shock plate mounting nuts and then 4 more nuts hold these tie down brackets on. You must have enough extra thread hanging down on the bottom of your U-bolts to fit the ¼” thick tie down bracket and another nut. No disassembly necessary, just slide the brackets over the extra thread on your U-bolts, install the included nuts, tighten them down and you’re done. Takes about 10 minutes to install. These eliminate all the hassles that come with using axle straps. Fits A, B, and E body cars with the standard shock plates like shown in the pictures. $60.00 per pair plus shipping. I also have these available for cars with CalTracs, same price. Made in the USA.
Email mrrandyj@aol.com

I have a new SCAT & Diamond forged rotating assembly for 340 Mopar engines. All parts are new high-quality parts. Final cubic inches will be 414”.
The assembly includes the following parts.

• SCAT forged 4.000” crankshaft part # 4-340-4000-6123
• SCAT forged H-beam connecting rods with APR 2000 bolts part # 2-360-6123-2124A
• Diamond Forged flattop 4.060” bore pistons (0.020” oversize) part # 51028
• Trend wrist pins - 0.984" part # TPD-G9842750155
• Diamond wrist pin locks
• Perfect Circle file fit ring set with Moly ductile iron top rings part # 315-0036.065
• Speed Pro Tri metal Competition Series rod bearings part # 8-7125CH
• Clevite P-Series full groove main bearings part # MS-1344P


This rotating assembly will need balancing.

Price for this complete kit is $2,750 plus shipping cost.

I may be able to deliver to Carlisle or can meet in CT.

Email me at procketrichard@hotmail.com with any questions or for more pictures.

I have a new SCAT & Diamond forged rotating assembly for 360 & 5.9 Magnum Mopar engines. All parts are new high-quality parts. Final cubic inches will be 408”.
The assembly includes the following parts.

• SCAT forged 4.000” crankshaft part # 4-360-4000-6123
• SCAT forged H-beam connecting rods with APR 2000 bolts part # 2-360-6123-2124A
• Diamond Forged flattop 4.030” bore pistons (0.030” oversize) part # 51026
• Trend wrist pins - 0.984” part # TPD-G9842750155
• Diamond wrist pin locks
• Mahle file fit ring set with Moly ductile iron top rings part # MAH4035MS
• Speed Pro Tri metal Competition Series rod bearings part # 8-7125CH
• Clevite P-Series full groove main bearings part # MS-1266P


This rotating assembly will need balancing.

Price for this complete kit is $2,750 plus shipping cost. I may be able to deliver to Carlisle or can meet in CT.

Email me at procketrichard@hotmail.com with any questions or for more pictures.

I have 11 pairs (one complete engine set plus 3 spare pairs) of new Mopar Performance solid roller lifters for small block Mopar race blocks still in their packages. I took one pair to photograph. Part number is P5249584. See the included picture from the 1997 Mopar Performance catalogue for the description. The roller wheel size is ~ 0.80”.

The price for the 11 pairs is $650 shipped in the lower 48 States. I will ship internationally for the additional cost.

Email me at procketrichard@hotmail.com with any questions or for more pictures.

I have a new set of 8 Mopar Performance pistons and wrist pins Mopar part# P4876973 for a 3.454” stroke crankshaft. Specs are 4.060” bore, 1/16, 1/16, 3/16 ring set, 0.984” wrist pin, flat top with ~ 5 cc eyebrows, listed by Mopar as 10.5 compression ratio. Compression height is ~ 1.72” per my measurement.

Price for the set is $480 shipped in the lower 48 states. I will ship internationally for the extra cost.

Email me at procketrichard@hotmail.com with any questions or for more pictures.

I have a new set of 16 new Erson big block Mopar roller rockers in their original box. These are 1.6 ratio and have needle roller bearings that ride on the rocker arm shaft. These rockers are USA made, and are very strong and are well constructed. They are not designed for pushrod oiling.

Note I do not have the shafts for these rocker arms. These rockers use an 11/16” hardened shaft that oil the rockers through the head pedestal.

These rocker arms are very difficult to find. Price is $480 for the 16 rocker arms shipped in the lower 48 states. I will ship internationally for the extra shipping cost.

Email me at procketrichard@hotmail.com with any questions or for more pictures.

I have a pair of new individual W2 race head casting number P5249769. These heads have no machining performed. As delivered by Mopar including 3/8” iron valve guides and closed chambers. These heads require the use of T&D or Jesel rocker systems.

Price is $1,200 for the set plus shipping.

Email me at procketrichard@hotmail.com with any questions or for more pictures.

I also have 16 new Mopar Performance 1.5 ratio roller W2 exhaust rocker arms for the W2 & W5 Race heads. I will sell individual rockers or sets of 2, 4 or 8 as needed. Individual rockers are $40 each shipped in the lower 48 states.

Email me at procketrichard@hotmail.com with any questions or for more pictures.

I have a new PRW 1.6 ratio roller rocker arm kit containing all parts needed to install these rocker arms including steel bushed rocker arms, rocker arm shafts, spacers, shims, adjusters, steel shaft hold downs and hold down hardware. This kit is new in the box and is PRW part # 3231812.

Price is $510 shipped in the lower 48 states.

Email me at procketrichard@hotmail.com with any questions or for more pictures.