Mopar Big-Block RB main bearing sets. Both sets were installed bearing clearances checked and removed. PM me here if interested.

-Clevite MS-1795 V - Standard bearing size, $75 shipped
-King MB5116HP 001 - .001 undersize Standard bearing size $75 Shipped

****SOLD the 68-69 painted valve covers, thanks Jim,.................. Big block valve covers for sale, Please PM me for price $45-$150 thanks moparts !

Factory dual quad intake 1827899-1, AFB carbs 2652s/2653s, and air cleaners with air filters.
Removed as a unit from a 1958 Plymouth back in 1973.

$1500 obo

PM here for more info or pics

Up for sale is a 70 dual snorkel air cleaner. Better than average condition for an original unrestored air cleaner. Includes two lids. Both will need very minor dings repaired. If you're willing to spend time repairing the very minor imperfections you'll end up with a nice air cleaner. Also can be used just as is. I repaired the underside of the one snorkel where the heat riser tube is connected to. Visible in one of the pictures. Turned out nice. $200 plus shipping (oversized). I have additional pictures if needed.

PM if interested

Edelbrock CH4B intake manifold for 440 engines, very hard to find these days $450.00 (708) 288-2879

Edelbrock DP4B intake manifold for 383 & 400 low deck engines, very hard to find these days $375.00 (708) 288-2879

New never run 440 six pack set up. Edelbrock aluminum intake (powder coated hemi orange), 3 new holley six pack carbs (2x 4365, 1x 4144), new linkage, new fuel line set. This set is ready to bolt on and run. $3K/BO + shipping from MI 48837. Message me for more info. Joe

SOLD!!!!!!!!!!!!!!!

Brand New in the box Big Block Chrysler/Mopar Pro-Flo XT EFI Part # 7144 Manifold

Designed for 413-440 Chrysler motors, the Pro-Flo XT Chrysler 440 EFI intake manifold is engineered with a large plenum and long tapered runners to deliver maximum horsepower. This manifold delivers a broad torque band throughout the rpm range of 1500-7000 rpm. $500 + shipping PM here or Phone (716) 655-0625 this is a land line. Ask for Gary

SOLD JW Ultra Bell 92457 Big Block Chrysler to TF727 or A518 Brand new in box $500 + shipping PM here or phone (716) 655-0625 ask for Gary (this is a land line)

SMR transmissions B/RB to small block transmission adapter kit. Part number SM 99-100P for a 6 bolt crank. New in box, the box has been opened but only for inspection, never installed the kit. for info: https://smrtrans.tripod.com/smrtransmissionsintro/id9.html $500 + shipping PM here or phone (716) 655-0625 ask for Gary or leave a message ( this is a land line)

Also listed under Hemi engine parts
4.500 Keith Black crank, 8-bolt flange.
Std/Std journals, has Mopar rod journals, not chev.
$2500
I can take as many pics as you want.
425-287-4386....cell

for-sale a matched set of stock LY rods 413/426/440 out of a running 440 , cleaned NO burn marks or spun-bearings, extra nice condition , i was going to use them till i gust bought a rebuilt short block. $175 FREE=SHIPPING thanks moparts !

871Complete Blower Setup, For RB Engine, Includes Intake/Carbs/Fuel Lines/Throttle Linkage and 2 filters and Scoop

Blower has been refreshed. All other parts are Brand New. $5000

Call Bill @ 765-437-8393

Kokomo, IN

Holley 4782 and 4783 carburetors from Direct Connection. I have not run these but they still have the original stamps on the outside and also the inside where I removed the fuel bowl. I don’t think they have been run much. All of the dates on the carburetors end in zero. Would assume they are 1970 but no way to know. I have lots of pictures and can send more if interested. These are pretty clean and were stored inside. Asking $2000 but am open to offers.

After waiting a long time, I finally got a BMP Hemi block, so I do not plan on using any of the 493 short block stuff I was collecting.

Block was done by Don's in Kenosha Wisconsin (my company just relocated me from Racine to West Palm Beach)
Hot tank, mag, deburred, small amount of clearance work for stroker crank, bore 30, cam bearings. After getting relocated I decided to have the block square decked by Keeners in West Palm. $3000 for everything in the pics. Crank is 4340 4.150 stroke. pistons are 440Source made by Icon, 24 cc dish. 9.5 - 10.5 CR depending on what heads you use.

Just to clarify: The crank is 10 under. The rods & pistons came out of a running 493 that was in a plymouth I bought. The block is from the late 70's.

For sale are a pair of Carter AFB carburetors. Carter part number #9410s. 400 CFM. Both carbs appear to be in good condition. Everything moves freely. Will need kits. $250 each plus shipping. Reasonable offer? Have a few additional pictures if needed.

PM if interested

Full set of springs, retainers and locks removed from Stealth heads. Never used. Located in Baton Rouge, La. $80 plus shipping. Payment via USPS money order.

-Comp Cams 7 Degree stamped valve locks. Designed for 11/32” single groove valves.

-chrome moly hardened retainers for 11/32” valve stem

--Valve Spring Type:Single with Damper. Valve Spring Closed (seat) Pressure:Approx. 130 pounds @ 1.875" installed heightValve Spring Open PressureApprox. 330 pounds @ 1.275" (.600" lift.) Valve Spring Inner Diameter:1.050"Valve Spring Maximum Lift: .510"Valve Spring Coil Bind Height: 1.130" Valve Spring Outer Diameter:1.550"Valve Spring Free Height2.400"Valve Spring Installed Height:1.875"Valve Spring Wire Diameter:.202"Valve Spring Number of Coils:5.5

High flow water pump housing
Casting 3751216
$65 plus shipping
PM for more info

Edelbrock intake for 440 big block. CH4B with Chrysler part number. Good condition, no cracks, came off my Challenger for restoration. $300.00

Trouble posting pictures, email or text me and I will send pics.

Dennis
954-683-1930

Pair of Mopar big block cast iron exhaust manifolds

Left hand manifold has a casting date of 3-22-73 and casting number 3751068. This one is $70 (plus shipping)

Right hand manifold has a casting date of 3751074. It's also missing the heat control valve as shown in the photos. This one is $50 (plus shipping)

They need to be cleaned up, but otherwise appear to be in fair enough shape with no apparent cracks. PM me for more photos. Located in West Sacramento I'll take $100 if you buy the pair (plus shipping - I'm sure it won't be cheap, unfortunately).