Set of original Weiand small block valve covers. Original box with decals and baffles. 5 out of 6 mounting screws for baffles.
Packing material dated 12-79.
$450 shipped lower 48

Clean set of Small block valve covers.
Very clean. No rust.
$340 shipped. Lower 48

I have for sale a used right side, E-body, SB engine mount bracket. It’ll fit any of the SB engines. This bracket is straight, clean and painted. It comes with the 3 OEM attaching bolts, nuts but only 2 of the flat washers. I would like to get $8.00 for everything plus the shipping.

Edison, NJ
rider1454 at aol.com

I have for sale a really nice OEM 360 cast crank, casting number 3418640. This crank was in a 360 block with a 1971 casting date. This is very clean with the rods and main journals already cut .010/.010. The only thing that this might need is a very light polish. Other than that, it needs nothing. At some point though, this crank was balanced at the back of the crank as Mallory metal was installed in the last counter weight as seen in the pics. No heavy metal at the front though since the OEM balancer was used. Neutral balance converter and standard offset weight front balancer setup. Additionally, the oiling holes have been chamfered so better bearing oiling. In addition, the OEM balancer that was used for the original balancing is included. The hub is in decent shape but a slight groove can be felt so perhaps a repair sleeve might be in order. The balancer pulley bolts are also included. I would like to get $75.00 for everything plus the shipping. This is a heavy piece so the shipping will be crazy. Local pickup would be great or depending on location, I can meet part way for the cost of fuel and any tolls.

Edison, NJ
rider1454 at aol.com

I have for sale a set of main caps that came from a 1986 318 engine. They are all in excellent shape with no spun bearings and have been cleaned. The bolts that were used on this engine were a mismatched set so I’m just including the correct ones that I found. These caps can be used on any of the 273, 318 or 340 engines but the original 340 caps were a bit beefier. These caps can also be used on the V-6 engines as can be seen cast into the caps. I would like to get $20.00 for the set with the bolts.

Edison, NJ
rider1454 at aol.com

For sale are these crank (top two) and water pump pulleys. All are single groove except for the top left crank which is two groove. Some have legible part number, some don't. The top one on the right has the number printed on it but the 6th digit is not all there as it is partly printed over one of the holes. Most of them are pretty clean but there is some minor pitting on a few with the exception of the upper left crank pulley which has a fair amount of pitting on it. Prices do not include postage. I don't have Paypal so money orders, particularly postal are preferred. I will also accept personal checks but will not ship until they clear my bank. gt340 at yahoo.com

I have a set of New BRC 4.030" forged flat top pistons and pins for a 3.79" stroke small block crankshaft. Compression height is ~ 1.57" and the ring lands are 1/16, 1/16 and 3/16. Pins are 0.984”. Approximately 6cc valve reliefs.

These pistons can be used in aftermarket race blocks or stock 360/5.9 magnum engine blocks.

Price is $475 shipped in the lower 48 states. I will ship elsewhere for the added cost.

Email me at procketrichard@hotmail.com with any questions or for more pictures.

Restored AVS carburetor for 1970 340 auto cars. Date Code L9. Linkages, screws, solenoid housing and bracket disassembled and zinc plated. Solenoid tested and works.

$750.00 + shipping for zip code 18929

cudaize@comcast.net

**SOLD - Thank You Moparts**

Hi all, I have a set of 340 motor mounts and new insulators. These are correct for a 340 engine which I believe are 340 only? Asking $70.00 shipped. Good old fashioned postal money order only. Plese PM me here for fastest response. Thank you for the ad moparts!

For sale: 340 6 pack intake, carbs, air cleaner. Has 440 6 pack carbs. Air cleaner base plate looks new.
$4500. Can deliver to Spring Fling show in Van Nuys, CA April 20th, 2024. Email: ebodycab @msn.com
Phone: 818-426-8685

1970 340 block and crank engine is from a 1970 Cuda Vin 0b212337 build date7,14,69 2780930,340,6 block has been pressure tested cleaned has no damage crank has been turned 10,10 and was in a stick car pilot bushing in place also has a 1969 318 for parts pictures are to large to load can text photos to interested buyers PRICE 2000.00

1970 340 4 speed carburetor

Good condition, rebuild or restore. Secondary throttle shaft is tight.

$400 obo

Thanks

1972 340 4 speed carburetor
This carb is in good condition and moves freely.

$400 obo

Thanks

NEW 340-360 CROWER CAMSHAFT AND LIFTERS &MP DOUBLE ROLLER CHAIN&GEAR SET,CAM IS #31981 304HC, 501/304 114 LOBE SEP, .334 LOBE LIFT,238 DURATION AT .050, LIFTER#66031X3-16, BRAND NEW$400
cowgerwilliam035@gmail.com

360 A,B&E MOROSO DEEP OIL PAN,PICKUP, OIL PUMP,WINDAGE TRAY, ALL NEW ,WAS INSTALLED and removed from a fresh shortblock$250

cowgerwilliam035@gmail.com

340-360 mopar parts COATED 1 7/8S JR 340-360,MULTI PIECE HEADERS B&E STOCK/SUPERSTOCK ARE NEW NEW$500
TRAVELLLING FROM AZ TO PA IN APRIL CAN DROP OFF ANYWHERE ALONG THE ROUTE

cowgerwilliam035@gmail.com

360 chrysler marine
Cast iron front timing cover,water pump, prestolite alternator& brackets, external mechanical water pump& brackets, pullies, belts, bolts, came off 75 chrysler marine 360 will fit 273 318 340 360 marine inboard engines.
Also have a flywheel& exhaust manifolds if you want them. Package deal. ( included if you buy above parts)$300

EXPENSIVE TO SHIP HEAVY

TRAVELLING AZ TO PA IN APRIL CAN DROP OFF

1973 340 1974 360 ORIGINAL A-BODY SPOOL TYPE MOTOR MOUNT BOLTS,NUTS,WASHERS, INTAKE BOLTS, VALVE COVER BOLTS,OIL PAN BOLTS, AUTO TRANS FLEXPLATE TO CRANK BOLTS, TC BOLTS FLEX TO TC, FUEL PUMP BOLTS, USED, $60
cowgerwilliam035@gmail.com

For sale are a pair of Carter AFB carburetors. Carter part number #9410s. 400 CFM. Both carbs appear to be in good condition. Everything moves freely. Will need kits. $250 each plus shipping. Reasonable offer? Have a few additional pictures if needed.

PM if interested

Casting number 2780998 interchanges with 2951995 P3690743 and 2463661. Fits Mopar Small Block 318-340-360. 90 degree oil filter adapter mount. excellent condition...........$125

Thank you

716-997-0070

bakurruda@aol.com