Looking for the left fender top rear chrome molding for 71 and 72 charger. or i will sell the 3 moldings i have for $200.00 plus shipping. i have 2 right side short moldings only need the left to have a complete set of 3. rich at 815 520 3227 please text me first then i call you back no pms thanks

WANTED: 1971-up B-body Tuff Wheel adapter. Don't need hardware, not worried about paint.

ISO 68 Coronet tail light panel
Sheetmetal piece not trim
Let me know whats available
Thanks

Looking for a decent steering wheel for 64 or 65 B-body

WANTED: complete set of four side marker retainers from a 1970 Dodge Coronet

I need a pair of these 67 only splash guards (plastic) and am also looking for a real nice NO ROT, passenger front fender, 67 ONLY FENDER, not 66. I am also looking for the front passenger side fender molding for a 500 model, the piece closest to the bumper in front of wheel opening, may also take the wheel opening molding too if in great shape, only need real nice pieces as mine are better than average. I know shipping is high and am hoping to find something in New England area for the Fender, but it does not rule out the rest of the sates for a nice oner! Thanks. lafrancebiglou@aol.com

1970 road runner bumpers wanted, need to be straight but dents, bad chrome ok, located in New Hampshire so within reasonable driving distance as shipping would be too expensive.

wanted 1968-70 B Body rally gauges NOS MOPAR ONLY part number ampere 2857 169. thanks Bob Horman

WANTED:

1970 GTX -- Project or better yet a running driving car --- DO NOT WANT ANYTHING NUMBERS MATCHING so please don't send me you $55K plus cars...I'm not interested in them. I'm looking to drive and build MY own GTX the way I want it. Looking for a non-numbers project or driver.

MUST BE GTX (not a clone) Must have fender tag, or build sheet to back up a RS23 VIN on dash and title. Will consider cars with out fender tag or build sheet as long as they are RS23 VIN and Title. MUST HAVE TITLE. Closer to Pittsburgh, PA the better, but will consider all sent my way.

PM me here or email me: derek@consolidated-displays.com

Wanted 1968-9 B body gas tank sending unit from Dodge Charger R/T, Coronet R/T, or Plymouth GTX. Bob Horman

Im looking for 65 Belvedere I fender emblems . Must have all the tangs and be in good shape.
Please contact by pm

WANTED 1968 Dodge Charger parts. first 15X6 steel wheels stamped 15X6JK. Hemi automatic trans dip stick and fill tube. HEMI power steering hose. I have other wants see my adds this website for dash gauges and gas tank unit. always interested in and 1968 dodge Charger NOS items you may be selling. Thanks Bob Horman 3-20-2024 I would take an original USED power steering hose if useable condition like in the picture. THANKS to all who have helped me get me 1968 Dodge charger back on the road!

WANTED 1968 hubcaps 15 inch Silver painted insert with plain center or Power disc brakes. NOS hubcaps only please. Bob Horman

Looking to buy a reasonably priced plymouth air grabber door.

Thanks!

I'm looking for a 2095150 starter motor rebuildable core. Prefer a date code of somewhere in the mid April to mid May 1969 time frame. I'm willing to piece one together so I'll take just a barrel or just a nose if dated right. Really all I need is the barrel & nose if that's all you have.

Thanks

Am needing a good front radiator support for 66-70 B body 22 inch wide only. Or just the passenger side mostly.

charles6970@yahoo.com

lqqking for a NICE third generation green (or black) ac dash pad, it's for a 73 se charger, also solid front fenders if in a 5 hr. Ish driving distance of Illinois.

Anyone happen to have one of these for sale?
Needed for a 1970 B-body. Goes on the passenger side behind rear wheel well to protect fuel lines on ECS cars.
Thanks Moparts.

Looking for one Short Headliner Bow clip, end or whatever its called that slips on bow. L shaped.

Thanks