Wanted:

Complete set of column to trans. shift linkage for a 340 A-body and 727 trans.

Rally dash bezel for a 1970 Dart. One cut for an aftermarket radio is O.K.

69 Barracuda bench seat with center armrest. Prefer local to Detroit area for pickup so as to avoid shipping.

A nice pair of black sunvisors for a 1970 Dart. I believe 69's are the same but not sure about other years.

I'm also looking for one of these aftermarket Mopar logo shifter balls. Black ball with white Mopar logo (blue logo O.K. too). I know they are available new but I don't want to spend that much so I am good with a used one.

gt340 at yahoo.com

looking for mag style wheels 15x7 inch 5x4 inch bolt pattern new or used for a 1969 Dart GTS

WANTED

1971 Dodge Demon 340 4 speed car --FJ6 Color --- MUST BE able to be documented (title, build sheet, fender tag). Looking for numbers matching, but will accept period correct 340 and 4 speed or non-numbers matching 340 4 speed but must have documentation of FJ6 color on build sheet / fender tag. Will consider everything from fully restored ready to driver to a full project (with the correct documentation)

FJ6 is preferred but will consider consider all other colors provide documentation supports it. I have plenty of Demon's to build one, but want a documented car.

Email me description, price, pictures, location of what you have. derek@consolidated-displays.com

Under dash a/c vent mounting bracket (Found)

Pair of horns with brackets Hi and low, in working condition and nice shape (Other years would work)



Following parts I am looking for in the color BLUE and in good condition. (will consider other colors)

Lower steering column cover (Found)

Drivers side plastic sail panel

Dash pad (Blue or Black) (Found)

Seeking out a 73-76 A body Front Sway bar and K-frame brackets. I can come up with the rest.

If you don't mind, email me HoosierGarageYT@gmail.com

if you msg me here it might take a few days.

Shipping Zip: 47164

Looking for current owner of this car. The guy that built it would like to BS. Thanks Terry

FOUND set of 198 connecting rods, from a slant six, with part number 2951260.

I need a DRIVESHAFT for a


1973 Duster 340, 4-speed w/ 8.75" drivetrain.

I am swapping my factory 8-1/4 (3.23) for a 8-3/4. Any year A-body that was a 108" manual / 8.75" should work. Leftover parts available after I complete the swap.

Thanks!

I need an upper rod for a 71 Abody for a colum shift car. This is the one that comes from column to the torque shaft. I believe it should have a stud on both ends with no adjustment. I have everything else. Pm me for a number so you can send me a picture.

Looking for rear c pillar vinyl top trim for 71 duster thanks in advance. Please text 717 823 3429 or PM

Hey Guys!
I am actively looking for a 1968-1970 Dart. I want a nice car preferably with above the factory horsepower. Does not need to be numbers matching...a NICE car though. My budget is $25k. Near eastern Pennsylvania would be really nice! PM me with one that you are selling!

found
f

I would like to find a nice pair of Duster fenders. Whats avaliable?

blewbyu2bad@aol.com

looking for a headlight bucket for a 67 cuda

[img]https://photos.app.goo.gl/vxSEEV1ksV1XM5Xx8[/img]

I am looking for a nice set of headlight bezels for a 63-64 Dodge Dart. Singles are OK also. Thanks for any leads!

could use a good left front fender for a 1969 valiant


price and condition ?

I am looking for a NOS 1972 only A Body fuel return line check valve. Part #3583539.I'd pay 150.00 for a NOS one. PM me here or email jim@heartlandtire.net

Looking for Accurate exhaust manifold to clear Z-bar on 68 Dart big block 4 speed. Thanks for any leads

Thank you Moparts for ad!

Looking for front marker lights 70-71 Plymouth Duster

Hi, I'm in need of at least one complete front fender marker light assy, or a pair if you have them

One side is totally gone, the other side has the light in the fender, but is missing the bulb socket and pigtail harness

Please let me know if you have anything available

Thanks in advance, John