Anyone tried this ? - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech Anyone tried this ?

Print Thread

Page 2 of 2

1

2

Re: Anyone tried this ? [Re: Stanton] #3199667 12/23/23 03:16 PM 12/23/23 03:16 PM
Joined: Jan 2013 Posts: 126 Oregon J Jamie McGrath member
Jamie McGrath member J Joined: Jan 2013 Posts: 126 Oregon	I’ve seen some very tight golf balling of front straps of 1911’s by a well known gun smith, but I have always wondered it one were too golf ball nearly all the pendulum of a Tunnel Ram/Rat Roaster/STR up too about 1/4in where the port entry is, if that wouldn’t aid port velocity and enhance the fuels atomization and distribution?

Re: Anyone tried this ? [Re: Stanton] #3199868 12/24/23 03:31 PM 12/24/23 03:31 PM
Joined: May 2005 Posts: 2,107 Apollo, PA. B1MAXX top fuel
B1MAXX top fuel Joined: May 2005 Posts: 2,107 Apollo, PA.	Originally Posted by Stanton "Builds up the boundary layer, makes the port "smaller" is my take." No. The principle is the same as "vortex generators", the point being to keep airflow against the surfaces - ideally making use of the full port volume, not decreasing it. The way I see it.... I can see it helping to grab and turn it though over the short side but that theory didn't work for me when I tried it once. Last edited by B1MAXX; 12/24/23 03:32 PM.

Re: Anyone tried this ? [Re: B1MAXX] #3201762 01/02/24 04:59 PM 01/02/24 04:59 PM
Joined: Apr 2003 Posts: 3,574 Tulsa, Oklahoma 340Cuda master
340Cuda master Joined: Apr 2003 Posts: 3,574 Tulsa, Oklahoma	This may not be related at all but I thought of this thread when a saw a rule change today for NHRA Pro Stock engines: "Surface of plenum area must remain smooth" https://www.nhraracer.com/content/general.asp?articleid=72922&zoneid=132

Re: Anyone tried this ? [Re: 340Cuda] #3201778 01/02/24 06:39 PM 01/02/24 06:39 PM
Joined: May 2012 Posts: 1,918 South Bend John Brown top fuel
John Brown top fuel Joined: May 2012 Posts: 1,918 South Bend	Originally Posted by 340Cuda This may not be related at all but I thought of this thread when a saw a rule change today for NHRA Pro Stock engines: "Surface of plenum area must remain smooth" https://www.nhraracer.com/content/general.asp?articleid=72922&zoneid=132 NHRA always a party pooper. Making rules where no rules were needed. Make a basic framework of rules, and then let then inovate. July 19th should be "Drive Like Rockford Day". R.I.P. Jimmie.

Page 2 of 2

1

2

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1