Indy Maxx wedge aluminum block head studs - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech Indy Maxx wedge aluminum block head studs

Print Thread

Indy Maxx wedge aluminum block head studs #2668706 06/22/19 01:04 PM 06/22/19 01:04 PM
Joined: Feb 2013 Posts: 84 La.USA R rick4106 OP member
rick4106 OP member R Joined: Feb 2013 Posts: 84 La.USA	Have a 572 aluminum indy block. Does these take a special head stud

Re: Indy Maxx wedge aluminum block head studs [Re: rick4106] #2668710 06/22/19 01:16 PM 06/22/19 01:16 PM
Joined: Jan 2003 Posts: 14,496 So. Burlington, Vt. F fast68plymouth I Live Here
fast68plymouth I Live Here F Joined: Jan 2003 Posts: 14,496 So. Burlington, Vt.	The heads being used dictate which stud kit you need. 68 Satellite, 383 with stock 906’s, 3550lbs, 11.18@123 Dealer for Comp Cams/Indy Heads

Re: Indy Maxx wedge aluminum block head studs [Re: fast68plymouth] #2668736 06/22/19 02:34 PM 06/22/19 02:34 PM
Joined: Feb 2013 Posts: 84 La.USA R rick4106 OP member
rick4106 OP member R Joined: Feb 2013 Posts: 84 La.USA	The engine has 572-13 heads. My engine guy said aluminum blocks normally have a dimple on end. The studs that were in this engine are about 1/4 less then thread length .

Re: Indy Maxx wedge aluminum block head studs [Re: rick4106] #2669420 06/24/19 03:28 PM 06/24/19 03:28 PM
Joined: Jan 2003 Posts: 2,932 Finalnd, Perkele J jyrki master
jyrki master J Joined: Jan 2003 Posts: 2,932 Finalnd, Perkele	I have used regular studs, finger tightened. Have had no problems. Plynouth VIP '67 TT IC EFI

Re: Indy Maxx wedge aluminum block head studs [Re: jyrki] #2670725 06/27/19 02:16 PM 06/27/19 02:16 PM
Joined: Jan 2003 Posts: 2,917 A shed in England Tig master
Tig master Joined: Jan 2003 Posts: 2,917 A shed in England	Indy Cylinder head sells them. Made by ARP, they're the same ones that fit -1 and SR heads. Part # 440 - H4 - 1712. Personally I've had no issues dealing with Indy but it is a rare occasion. I normally deal with Indy through a 3rd party Vendor (Marsh Performance) Todd will supply you with anything you need http://www.mopartsracing.com/ '74 Challenger..9.46 @ 145.9 1/4, 6.001 @ 118 1/8 so far. 4023lb !!! # N/A, Marsh performance 655ci, Indy Maxx, T/R, Indy 600-13 X's, Street legal, pump gas, full interior, Cal-Tracs, mufflers, 3:73's and real 10.5 radials. 9.51 @ 142.4 1/4, 6.003 @ 114 1/8 with our old mule KB, 572-13, 580 wedge. RHD '68 Barracuda Fastback 323ci street/strip. Best ET 13.88 @ 99.03

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1