So who makes a repopped single piece rotor for 66-69 Bendix? I have only see the rotor that requires and original hub to mate too it.

https://www.carid.com/right-stuff-detail...&url=722009

Look here.
I knew i had it filed somewhere in one of the computers that i use, but i didn't know which one, until i found it.



I think you need to look at that a little closer. Google will help. Fitment 68-74 charger; 70 to 74 E body. Clearly wrong. That is really a 70-72B and 70-74E rotor. That is the one that does not fit right when folks try to use it on a Bendix set up.

I might just turn these rotors here at work.

"Reproduction rotor and hub. Improved one piece design. No pulsation like original two piece rotors that expanded at different rates. Wheel studs with right hand threads already installed. Works with original Bendix or Kelsey Hayes caliper's."

I had to do research for my 69 disc b body. I separated quite a few 2 piece Bendix and KH rotors to take measurements.

I still think that one is a problem too, though I have not personally seen one. Look at the note above. Says it works with both Bendix and KH calipers. Clearly not meant to. Bendix was the 11.19 and KH 10.98. Plus height/hub differences and spindle mount surface offset. I think this may be a bastardized rotor in the middle. From what I read, folks had to turn down the inner surface to get it to work with a true 67-69 Bendix set up.

It really would be more helpful if Year one and others provided the full spec like RA does with their 70-72 Rotor.

The dura brake rotor only is made to the Bendix spec, you just have to mount the hub correctly.