|
|
|
Re: Replace 590 cam With Roller
[Re: 77DragracerR/T]
#2553045
09/21/18 09:05 PM
09/21/18 09:05 PM
|
Joined: Jan 2003
Posts: 14,513
So. Burlington, Vt.
fast68plymouth
I Live Here
|
I Live Here
Joined: Jan 2003
Posts: 14,513
So. Burlington, Vt.
|
Okay, so what was the motivation for the cam change?
Those cams are quite a bit different than each other.
Like I said earlier....... cut the oil filter open and see what’s inside.
As much as your car slowed down, if it’s engine related...... it should show up in the filter.
I assume you checked the basic stuff...... timing hasn’t moved.....still getting full throttle, etc.
I’d do a compression and leak down test as well, and if it all looks good..... time to pull the trans pan.
68 Satellite, 383 with stock 906’s, 3550lbs, 11.18@123
Dealer for Comp Cams/Indy Heads
|
|
|
Re: Replace 590 cam With Roller
[Re: 77DragracerR/T]
#2553058
09/21/18 09:45 PM
09/21/18 09:45 PM
|
Joined: Jan 2003
Posts: 11,724
Portage,michigan
B3422W5
I Live Here
|
I Live Here
Joined: Jan 2003
Posts: 11,724
Portage,michigan
|
Dont forget to check battery and alt.
Bad battery can kill ET
I found that out a few years years back
69 Dart GTS A4 Silver All steel, flat factory hood, 3360race weight
418 BPE factory replacement headed stroker, 565 lift solid cam
Best so far, low 10.30’s 1/4
1.41 best 60 foot
6.56 at 104.17
|
|
|
|
|
|
|
