It'd be cool if they made the carbon stuff look more like the original car. There is an orange, T/S car out here in Div.7 that doesn't look much like the original. Pretty damn fugly. Some of the Daytona and Duster stuff looks cool...

Sorry, I kind of dig the pro mod look

Very impressive!

Thanks, Making some progress today. I cut out the bottom of the rocker so they ride higher. I will have to cut the fenders too. Ill figure out the rest of the last pipe tomorrow. I'm digging it

The fourth tube was a drag, I spent all day on it trying to make it happen. Tire rubs, need to get rid of the 28's and buy some 26's
Time to start on the other side.

I don't know how the real header guys build them, now that everything fits I will separate all the full tubes, fully weld them all, sand them down and polish the heck out of them and hopefully reweld them back the the flange just the way they are

Looks awesome Jeff. And the good thing is they will bolt right on mine when you are not looking.

Thanks! and by the way, I instructed the crew to keep an eye out for you

Drivers side is coming together. First plan was to sand out all the welds and polish but I'm not feeling it, this looks good enough for a race car

I've been slow. Driver's side is done

Am DIGGIN it!!

Nice!

Looks good!! Where's the muffler?

Thanks guys!!!
Mufflers? lol
I'm geeked to try them out

Doing a few other little upgrades this winter. I got some wider Weld Alumastar double beadlocks for the rear (thanks Hardcore B) some matching Weld Alumastar for the front. 14MM pulleys, Kevlar Belt. Brian Robbins is cutting me out a 1.5 spacer for the blower, It should also mover the blower forward an inch. I got an RCD 2 piece crank Hub, Crank trigger should help lock the timing in. Shooting for 4.5s or 4.6s this year. That should put us only in the top half of Milan's Drag Radial class as our only Mopar representative. If 2017 goes well will be looking for a better blower for 2018 and try to find another 10-15 pounds of boost

Looks great! Keep up the good work!

Yep! Looks awesome!

Very nice
Your door must just clear

Thanks Guys,
Yeah I started all the way back where it would just clear the door as a starting point, then work my way forward

I had to put a pic up, she is looking good. I cut about 5 inches off the front fenders. I hope to make a lot of noise in the next couple days.