edelbrook hemi heads - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech edelbrook hemi heads

Print Thread

Page 2 of 2

1

2

Re: edelbrook hemi heads [Re: cesar perez] #2418731 12/14/17 10:44 PM 12/14/17 10:44 PM
Joined: Jan 2003 Posts: 2,299 NE Ohio DoubleD top fuel
DoubleD top fuel Joined: Jan 2003 Posts: 2,299 NE Ohio	the heads were just cleaned up in the bowls, gasket matched, touch up on the valve job and set the guides - nothing radical the heads out of the box flow around 410 - 415 ish

Re: edelbrook hemi heads [Re: DoubleD] #2418733 12/14/17 10:50 PM 12/14/17 10:50 PM
Joined: Jan 2003 Posts: 965 Odessa, Fl B blowndart super stock
blowndart super stock B Joined: Jan 2003 Posts: 965 Odessa, Fl	Originally Posted By DoubleD the heads were just cleaned up in the bowls, gasket matched, touch up on the valve job and set the guides - nothing radical the heads out of the box flow around 410 - 415 ish Thanks

Re: edelbrook hemi heads [Re: cesar perez] #2418794 12/15/17 12:50 AM 12/15/17 12:50 AM
Joined: Jan 2003 Posts: 6,392 nielsville, minn. Q quickd100 master
quickd100 master Q Joined: Jan 2003 Posts: 6,392 nielsville, minn.	My Indy Hi PO heads flowed 443@.700 corrected. Having said that on my motor they require a bigger header than what I'm currently running. The port is so big it acts lazy with my 2-1/8 headers.Dave

Page 2 of 2

1

2

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1