Sorry it took me a bit longer, but OK, here they are.

So a bit of a story first...I've been using these MrGasket pieces for some time now, as I needed to match up my Hooker headers to the stock '596 castings I ended up picking up the #5935 & #5949 gaskets. The pics show the differences between these. I think the 5949 fit better, just a shorter port and seems to be raised in the right spot on the center exhaust ports.

1) #5935


2) #5949


3) #5935 center ports


4) #5949 center ports


5) gasket overlap

Thanks everyone for the really good information!!

Those 5949's dont look to bad.

Yup I originally posted them here:
https://board.moparts.org/ubbthreads/ubbt...-lost-here.html

In the last picture you can see I actually used the standard exhaust gasket as a templet to paint it's pattern over a W2 adpater flange this is the truest comparison

The last shot was to show how much the 1-7/8th header tubes extend over the econo head inner exhaust bolt patteren

Thanks!!