My gen 3 project
#2295948
04/29/17 08:59 AM
04/29/17 08:59 AM
|
Joined: Oct 2006
Posts: 4,590 Indy
joshking440
OP
Lunch is on me!
|
OP
Lunch is on me!
Joined: Oct 2006
Posts: 4,590
Indy
|
Little update. I was at BES this week checking my header flange fitment and my block was in the boring machine. We are getting close- Should have it back in a few weeks. 4.060 bore 3.900 stroke 10:1 GEN3 performance block, thitek heads 2.200 Ti intake valves inconel exhaust Winberg Crank Callies ultra billet steel rods Ross pistons 242/242 .615 .615 @120 cam from Comp I have a set of billet precision 7675 ball bearing turbos that will make up for the short stroke and low compression.
Last edited by joshking440; 04/30/17 10:31 AM.
|
|
|
Re: My gen 3 project
[Re: joshking440]
#2296023
04/29/17 12:20 PM
04/29/17 12:20 PM
|
Joined: Jan 2006
Posts: 1,400 Trumbauersville PA
ric3xrt
pro stock
|
pro stock
Joined: Jan 2006
Posts: 1,400
Trumbauersville PA
|
That is sexy , I'll be following along
Truth has no agenda, but those with an agenda make their own truth. Some of us are so open minded they only see their View
|
|
|
Re: My gen 3 project
[Re: joshking440]
#2297091
05/01/17 01:05 PM
05/01/17 01:05 PM
|
Joined: Jan 2003
Posts: 6,266 Renton Washington
Triple Threat
master
|
master
Joined: Jan 2003
Posts: 6,266
Renton Washington
|
You're gonna need some steering column mods once you put the heads on. Then it wont seem so small.
Keep the updates coming.
-Dustin 67 Dart, 9 second, 392" G3 Hemi 68 Barracuda 340 F/SA
|
|
|
Re: My gen 3 project
[Re: joshking440]
#2297175
05/01/17 02:56 PM
05/01/17 02:56 PM
|
Joined: Jun 2008
Posts: 577 Arkansas
Adrielp
mopar
|
mopar
Joined: Jun 2008
Posts: 577
Arkansas
|
Josh, what class are you going to run with this combo? Limited DR, Outlaw 275?
Adriel Paradise Substation Design Engineer III
|
|
|
Re: My gen 3 project
[Re: Adrielp]
#2297601
05/02/17 09:04 AM
05/02/17 09:04 AM
|
Joined: Oct 2006
Posts: 4,590 Indy
joshking440
OP
Lunch is on me!
|
OP
Lunch is on me!
Joined: Oct 2006
Posts: 4,590
Indy
|
Josh, what class are you going to run with this combo? Limited DR, Outlaw 275? Just drag week and whatever local street car shootout type deal I can weisel my way into.
|
|
|
Re: My gen 3 project
[Re: joshking440]
#2297657
05/02/17 11:32 AM
05/02/17 11:32 AM
|
Joined: Mar 2010
Posts: 625 Indianapolis In. usa
Quickrunner
mopar
|
mopar
Joined: Mar 2010
Posts: 625
Indianapolis In. usa
|
What are you planning for rear gear and trany with this combo? You gonna run a Gearvendor od?
05 Ram 1500 Daytona package 71 Demon Gen3 hemi drag radial project
Missin' my 9 second 70 runner!
|
|
|
Re: My gen 3 project
[Re: joshking440]
#2298002
05/02/17 11:37 PM
05/02/17 11:37 PM
|
Joined: Oct 2006
Posts: 4,590 Indy
joshking440
OP
Lunch is on me!
|
OP
Lunch is on me!
Joined: Oct 2006
Posts: 4,590
Indy
|
2.10 first gear Turbo 400 and a ford 9"with a 3.55 I think. The car runs a 30" tall radial in the back.
I haven't fully decided on the gear vendors. Some people say it needs the floor modified and some say it doesn't. I haven't had to cut to floor up yet and don't really want to do that. And they are not cheap....I've kinda went over budget. Again...
Last edited by joshking440; 05/02/17 11:40 PM.
|
|
|
Re: My gen 3 project
[Re: joshking440]
#2298283
05/03/17 02:07 PM
05/03/17 02:07 PM
|
Joined: Mar 2010
Posts: 625 Indianapolis In. usa
Quickrunner
mopar
|
mopar
Joined: Mar 2010
Posts: 625
Indianapolis In. usa
|
Going through this right now with a Reid case 400 in my 71 demon build. The floor will need modified for the 400 with a GV on it. they have one for a TF that will fit with "dings" in the floor pan but it has a super long tailshaft adaptor I didn't care for and I wanted a aftermarket SFI case so I didn't need to mess with shields.
05 Ram 1500 Daytona package 71 Demon Gen3 hemi drag radial project
Missin' my 9 second 70 runner!
|
|
|
Re: My gen 3 project
[Re: joshking440]
#2298286
05/03/17 02:15 PM
05/03/17 02:15 PM
|
Joined: Mar 2010
Posts: 625 Indianapolis In. usa
Quickrunner
mopar
|
mopar
Joined: Mar 2010
Posts: 625
Indianapolis In. usa
|
2.10 first gear Turbo 400 and a ford 9"with a 3.55 I think. The car runs a 30" tall radial in the back.
I haven't fully decided on the gear vendors. Some people say it needs the floor modified and some say it doesn't. I haven't had to cut to floor up yet and don't really want to do that. And they are not cheap....I've kinda went over budget. Again... I'll post some pics on my build thread of my tunnel mods to fit the GV unit, plan on making sparks this weekend. And what's another 3k for a build like your doing? LOL Low rpms on drag week are my main reason I want one.
Last edited by Quickrunner; 05/04/17 01:07 PM.
05 Ram 1500 Daytona package 71 Demon Gen3 hemi drag radial project
Missin' my 9 second 70 runner!
|
|
|
Re: My gen 3 project
[Re: joshking440]
#2300850
05/07/17 09:00 PM
05/07/17 09:00 PM
|
Joined: Oct 2006
Posts: 4,590 Indy
joshking440
OP
Lunch is on me!
|
OP
Lunch is on me!
Joined: Oct 2006
Posts: 4,590
Indy
|
Working on ride height of the old girl.
Last edited by joshking440; 05/07/17 09:01 PM.
|
|
|
|
|