Re: FUN INDY FACT
[Re: ]
#2264637
03/07/17 12:15 AM
03/07/17 12:15 AM
|
Joined: Jan 2003
Posts: 14,514 So. Burlington, Vt.
fast68plymouth
I Live Here
|
I Live Here
Joined: Jan 2003
Posts: 14,514
So. Burlington, Vt.
|
I'll ask it again....... The heads with the line down the middle....... Bought as "Bare" or "assembled" ?
68 Satellite, 383 with stock 906’s, 3550lbs, 11.18@123 Dealer for Comp Cams/Indy Heads
|
|
|
Re: FUN INDY FACT
[Re: ]
#2264739
03/07/17 08:32 AM
03/07/17 08:32 AM
|
Joined: Jan 2005
Posts: 2,540 Milwaukee WI
TRENDZ
master
|
master
Joined: Jan 2005
Posts: 2,540
Milwaukee WI
|
Man I am OK with it I have seen heads this year that had the "two step" line down the middle where it was two different levels from what looked like two passes--then at a friends the other day I saw the block with the same deal--again I say I have never bought any other heads that were new and needed surfacing so be it with Indy I don't care Maybe the step in the deck lines up with the step in the heads to clamp the head gasket better! I think you just got an unfinished block. If you paid for a finished block, then there is an issue that needs to be resolved.
"use it 'till it breaks, replace as needed"
|
|
|
Re: FUN INDY FACT
[Re: TRENDZ]
#2264749
03/07/17 10:08 AM
03/07/17 10:08 AM
|
crabman173
OP
Unregistered
|
crabman173
OP
Unregistered
|
Here is a pic of what I am talking about TWO passes Two different levels on NEW Indy heads
|
|
|
Re: FUN INDY FACT
[Re: ]
#2264751
03/07/17 10:15 AM
03/07/17 10:15 AM
|
crabman173
OP
Unregistered
|
crabman173
OP
Unregistered
|
Are you guys crazy? NO other maker sends out heads like that with a .002-.003 two step level and then says oh..you bought them bare so...snap out of it. Who what when where how does not matter just look at the heads as shipped Defending those folks is ....well....can't say the words I am thinking--I am glad Indy was sold--Hope new owners improve things--but many many customers over the years have had to just put up with THIS kind of stuff from them--Dealers defend this because they make $$ off the line--I get that--but I posted this so if any back yard builder gets a set of heads he better beware and correct the decks before use--( and the valve job, and the guides , and all the rest)
|
|
|
Re: FUN INDY FACT
[Re: ]
#2264828
03/07/17 01:05 PM
03/07/17 01:05 PM
|
Joined: Jan 2003
Posts: 14,514 So. Burlington, Vt.
fast68plymouth
I Live Here
|
I Live Here
Joined: Jan 2003
Posts: 14,514
So. Burlington, Vt.
|
There seems to be almost universal love for B1 heads, and yet when you buy a set of those bare, they are much farther from being a finished, ready to use head than any Indy head I've ever had in my shop....... And everyone seems to be fine with that. Guides that are 5 thou undersize, seats just a big chunk of ductile iron, pushrod tunnels that require clearancing. Every set I've seen in use has some sort of external drain back lines added, yet the provisions for those lines aren't part of the std machining on the casting....... And no one is complaining.
Buying bare Indy heads is buying an unfinished part. When bought that way they come without a finished deck surface for about 10-12 years now.
Oh, and I have a set of stage 6 heads in the shop that also have the multi pass finish.
Just to be clear, I'm not taking the position that Indy stuff is always perfect. I've seen many things over the 15 years of selling their heads that really could have been done better, but the things you're crying about wouldn't be on the list.
My take on this thread is....... You bought unfinished parts and are unhappy that they aren't as finished as you hoped/expected. I think if you would have asked more questions before actually placing the order, you would have known what was going to show up at your door.
68 Satellite, 383 with stock 906’s, 3550lbs, 11.18@123 Dealer for Comp Cams/Indy Heads
|
|
|
Re: FUN INDY FACT
[Re: ]
#2264832
03/07/17 01:10 PM
03/07/17 01:10 PM
|
Joined: Oct 2006
Posts: 4,590 Indy
joshking440
Lunch is on me!
|
Lunch is on me!
Joined: Oct 2006
Posts: 4,590
Indy
|
Here is a pic of what I am talking about TWO passes Two different levels on NEW Indy heads That head left Indy and wasn't surfaced. Again- a call to whoever it was bought from would correct the issue. They have ONE finish machine to surface heads and ONE guy who does it. But things get missed. That head wasn't cut, end of story
Last edited by joshking440; 03/07/17 01:11 PM.
|
|
|
Re: FUN INDY FACT
[Re: joshking440]
#2264849
03/07/17 01:39 PM
03/07/17 01:39 PM
|
Joined: Feb 2014
Posts: 655 Huntsville, AL
Airwoofer
mopar
|
mopar
Joined: Feb 2014
Posts: 655
Huntsville, AL
|
If it is there....then they skipped the step and you are owed money back and I'm sure a call would resolve it. I happen to have worked there for 3 years and still speak with the guy who decks the blocks. LOL, what a crock of crap. Refund for work not done by indy??? You were part of the problem IMO.
|
|
|
Re: FUN INDY FACT
[Re: ]
#2264879
03/07/17 02:15 PM
03/07/17 02:15 PM
|
Joined: Jan 2012
Posts: 2,678 Stuttgart, Arkansas
rickseeman
master
|
master
Joined: Jan 2012
Posts: 2,678
Stuttgart, Arkansas
|
If you call Indy with a problem with one of their parts they will tell you real fast that you are an idiot.
2011 Drag Pak Challenger
|
|
|
Re: FUN INDY FACT
[Re: ]
#2264934
03/07/17 03:30 PM
03/07/17 03:30 PM
|
Joined: Jan 2003
Posts: 14,514 So. Burlington, Vt.
fast68plymouth
I Live Here
|
I Live Here
Joined: Jan 2003
Posts: 14,514
So. Burlington, Vt.
|
I've been reading Indy bashing threads about poor quality and lousy customer service ever since I bought my first computer. I'd say it should be pretty common knowledge by now...... And in each of those threads there is someone saying that if you want to run Indy products, the better course of action is to buy from a reputable dealer.
People still buy direct........ And are surprised when it turns out that all those threads that have been posted for years and years have merit.
I rarely ever get a complaint from a customer Ive sold some Indy parts to.
68 Satellite, 383 with stock 906’s, 3550lbs, 11.18@123 Dealer for Comp Cams/Indy Heads
|
|
|
|
|