Re: motor plate water pump gasket problems
[Re: 440Jim]
#2052614
04/12/16 09:52 AM
04/12/16 09:52 AM
|
Joined: Feb 2003
Posts: 2,563 S.E. Michigan
cl440
master
|
master
Joined: Feb 2003
Posts: 2,563
S.E. Michigan
|
Although I had a one piece front plate, I found that after awhile (months) gaskets could leak. Then I just used only RTV (no gaskets) and it never leaked again. Same here. We have actually replaced most every gasket on our engine with RTV.
|
|
|
Re: motor plate water pump gasket problems
[Re: challengermike]
#2052618
04/12/16 10:12 AM
04/12/16 10:12 AM
|
Joined: Mar 2006
Posts: 9,883 MI, usa
dvw
master
|
master
Joined: Mar 2006
Posts: 9,883
MI, usa
|
Never had a leak (1 piece plate) when sealed with Hylomar. And there is no cure time. Is that like the stuff gm use's on the front diff case half and t case half ? There's is red though. No that is aenerobic sealer. Poor in shear, very brittle when it cures. Works great for a small gap surface. Doug
|
|
|
Re: motor plate water pump gasket problems
[Re: challengermike]
#2052620
04/12/16 10:17 AM
04/12/16 10:17 AM
|
Joined: Jan 2003
Posts: 13,402 Marion, South Carolina [><]
an8sec70cuda
I Live Here
|
I Live Here
Joined: Jan 2003
Posts: 13,402
Marion, South Carolina [><]
|
I just use ultra grey silicone, no gaskets. No leaks in 10 years.
CHIP '70 hemicuda, 575" Hemi, 727, Dana 60 '69 road runner, 440-6, 18 spline 4 speed, Dana 60 '71 Demon, 340, low gear 904, 8.75 '73 Chrysler New Yorker, 440, 727, 8.75 '90 Chevy 454SS Silverado, 476" BBC, TH400, 14 bolt '06 GMC 2500HD LBZ Duramax
|
|
|
Re: motor plate water pump gasket problems
[Re: challengermike]
#2052628
04/12/16 10:30 AM
04/12/16 10:30 AM
|
Joined: Mar 2003
Posts: 1,467 Martinsville, IN
cdwmotorsports
pro stock
|
pro stock
Joined: Mar 2003
Posts: 1,467
Martinsville, IN
|
I had the two piece deal like you have. I just bought AndyF's single piece motor plate. It arrived yesterday. Man is it nice. Hughes engines had best price I found.
eBay-cdwmotorsports
|
|
|
Re: motor plate water pump gasket problems
[Re: challengermike]
#2052783
04/12/16 02:40 PM
04/12/16 02:40 PM
|
Joined: Jun 2005
Posts: 6,257 gulfport, ms, west mi
rowin4
master
|
master
Joined: Jun 2005
Posts: 6,257
gulfport, ms, west mi
|
Years ago I ran the 2 piece ear mounts, flex would break the seal and it would start to leak. I welded a strap across the top of the ears and that stopped the flex and the leak problem. Now I have AndyF front motor mounts on 2 of my cars, I just use standard water pump gaskets and never have had a leak. I do put stress on them from torque to pounding the oil pan into the pavement.
it's ok to butt heads, just don't do it with a butthead
|
|
|
|
|