Ammeter very fast fluctuation from middle to pegged out. - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech Ammeter very fast fluctuation from middle to pegged out.

Print Thread

Page 2 of 2

1

2

Re: Ammeter very fast fluctuation from middle to pegged out. [Re: John_Kunkel] #2014643 02/18/16 02:10 PM 02/18/16 02:10 PM
Joined: Mar 2015 Posts: 65 Louisiana J JL2 OP member
JL2 OP member J Joined: Mar 2015 Posts: 65 Louisiana	One detail I left out is that I am running an MSD ignition setup, part # 8534 distributor & part # 6425 digital 6AL ignition control. IDK if any of this matters. Thx.

Re: Ammeter very fast fluctuation from middle to pegged out. [Re: JL2] #2014965 02/18/16 09:25 PM 02/18/16 09:25 PM
Joined: Oct 2006 Posts: 1,264 New York, USA Chargerfan68 pro stock
Chargerfan68 pro stock Joined: Oct 2006 Posts: 1,264 New York, USA	I was advised by some local racers here to install the diode (included in the accessory bag with the MSD) because of this issue. They say it is somewhat common and installing the diode should solve this. I am going to try it. the installation is shown in the MSD instructions(but they only mention to correct run-on conditions, not fluctuating voltage). Still worth a shot...only 2 minute try. I also have the 6al , but with a MP elec distributor. 1.50 60Ft. , 10.75@ 127MPH Hauling 3900 LBS.

Page 2 of 2

1

2

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1