Why the change to smaller tires?

With the pic of the car in your sig it looked like you had a plan and I thought thats the look you were going after. I notice you like to tinker with toyotas correct.

Nice!
I like the little old toyotas and datsuns. A friend of mine has a 510 with a procharged 350 and tubbed running 9.70-9.90. He has owned the car for 27 yrs now.

More engine porno

I'm digging the paint finish on your valve covers!

Thanks guys, just trying to do something out of the ordinary!

Finish the trany rebuilt, now a little outside clean and a little paint and ready to install!

Well is being quite a long time since my last update in this, as i said before it will be slow but sure,

engine tranny is mocked up inside engine bay for installation fab and then off it goes again to prep and paint engine bay.
[img:center]https://scontent-atl1-1.xx.fbcdn.net/hph...amp;oe=563F9FE7[/img]

for now i went with a murder looks on it till there is enough mulah to do the paint i really want

[img]https://scontent-atl1-1.xx.fbcdn.net/hph...amp;oe=5641E2C7[/img]

[img]https://scontent-atl1-1.xx.fbcdn.net/hph...amp;oe=5648B1F4[/img]

Sold the TTI headers cuz they entrap my starter and they are a pain in the butt to deal with so i was lucky to find here a set of new ceramic coated pro parts headers late edition in new conditions.

[img]https://scontent-atl1-1.xx.fbcdn.net/hph...amp;oe=563BD2F1[/img]

Nice rear end shot!

[img]https://scontent-atl1-1.xx.fbcdn.net/hph...amp;oe=563C14E0[/img]

Plastidip off of the wheels and some polishing

[img]https://scontent-atl1-1.xx.fbcdn.net/hph...amp;oe=5652C61C[/img]

Front RX-7 seats custom mounted

[img]https://scontent-atl1-1.xx.fbcdn.net/hph...amp;oe=563E5BBD[/img]

And i dont know yet, but engine is built for it i may go later with like 12 to 15 PSI of boost to see what we can get out of it.

[img]https://scontent-atl1-1.xx.fbcdn.net/hph...amp;oe=564A4474[/img]

Woah... when did you decide turbo?