Narrowing Dana 60- Tips and pitfalls to avoid? - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech Narrowing Dana 60- Tips and pitfalls to avoid?

Print Thread

Page 2 of 2

1

2

Re: Narrowing Dana 60- Tips and pitfalls to avoid? [Re: 340man4ever] #1837498 05/30/15 08:36 PM 05/30/15 08:36 PM
Joined: Jul 2010 Posts: 791 Bama Randy.. super stock
Randy.. super stock Joined: Jul 2010 Posts: 791 Bama	What about a truck whitch has no tunnel to work with in the confines of, Then would it matter if it had equal length tubes?

Re: Narrowing Dana 60- Tips and pitfalls to avoid? [Re: Randy..] #1837657 05/30/15 11:31 PM 05/30/15 11:31 PM
Joined: Jan 2003 Posts: 8,017 Polson, MT DoctorDiff master
DoctorDiff master Joined: Jan 2003 Posts: 8,017 Polson, MT	Truck Dana 60 rearends have equal length tubes and equal length axles (1/2" pinion offset). Contact info

Re: Narrowing Dana 60- Tips and pitfalls to avoid? [Re: 340man4ever] #1837683 05/31/15 12:09 AM 05/31/15 12:09 AM
Joined: Jul 2010 Posts: 791 Bama Randy.. super stock
Randy.. super stock Joined: Jul 2010 Posts: 791 Bama	Cass do you offer 35 spline axles for a 49.5 Inch Housing? If so PM Me. Last edited by Randy..; 05/31/15 12:10 AM.

Re: Narrowing Dana 60- Tips and pitfalls to avoid? [Re: Randy..] #1837943 05/31/15 12:15 PM 05/31/15 12:15 PM
Joined: Jan 2003 Posts: 8,017 Polson, MT DoctorDiff master
DoctorDiff master Joined: Jan 2003 Posts: 8,017 Polson, MT	Yes. I can make a 35 spline axle package as short as 24.5" from my in-house forgings. I also handle Dutchman and Strange custom axles if you need something odd or shorter. Contact info

Re: Narrowing Dana 60- Tips and pitfalls to avoid? [Re: 340man4ever] #1838019 05/31/15 01:56 PM 05/31/15 01:56 PM
Joined: Jul 2010 Posts: 791 Bama Randy.. super stock
Randy.. super stock Joined: Jul 2010 Posts: 791 Bama	Thanks will call Monday.

Page 2 of 2

1

2

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1