Does anybody have the pattern for mounting the five top lights that go on top of the cab? Thanks.

no. but I am the new owner of a W350 that has those chikin lights on top.

I could measure or make a template for you. pics if they help out.

I will be removing them if you want the lights/wires...not sure what's there or conditions of now but can check it out.

Hey that would be great...thanks.....and that NV4500 trans too....need my address.....LOL...I'm kidding.....thanks I do appreciate it.

my NV4500 is a 2x 5 speed no good for the 4x4 with out a rebuild. sorry.

I do have a hydro bell for the 435 4 speed/205xfer (205 is the gear drive correct?)

so the 82 chickin light cab gets replaced with the 88 cab for hydro clutch. so no mo chickin lights fer me.

I will send them your way.

All kidding a side....that's what I've been dreaming about is a 2wd NV4500 trans for my 2wd Ramcharger, but I'm going with a cast iron OD833 for now.

well...I am wanting to put the rebuilt CRT/TF2 727/2500 stall TC back in it.

you come help pull it and it is yours for 600$. I need some new M/Ts and they run about 600$

deal?

Hey did you buy a chance to get a pattern?

I'm just now seeing this.....I would love to come hang out....don't have $600 or the money to go to Florida....LOL.....I would also like to get a part number off that one bellhousing you have. The one that has the 833 pattern and has the newer slave cylinder....also what size flywheel did that take?

I have a 75 300 and an 84 350, both with cab lights. I can run out and measure either one for you - just let me know.

tow 1 by R M, on Flickr

well...i got them mounted now, but if you don't mind....go head if you wouldn't mind doing that for me that would really be great.....see how bad I did. Thanks for your time. Also got my fender mounted signals added and the older ram head installed

I think you nailed it.

it has got to be real close like you have them.

Sweet.....thanks.

are they called chikin lights out there like they are down here?

Nobody gonna whip out a tape and check. Looks good to me.

No, I haven't heard that....but you never now.....lol

Clearance lights do, in fact, have a very specific pattern and dimensions for North America (US-DOT and Transport Canada). But since your truck doesn't require them, it really doesn't matter.

I've always figured this, but I couldn't find a pattern on google search to save my live.....last thing I need is getting myself into trouble for having them wrong....knowing my luck....lol

Looks great!! I'll go measure both my trucks tomorrow!

Thanks.

The ones i've seen I think the end ones are further to the side but with the different roof shapes and dimensions there's probably no real measurement for it as long as it's close.

Info and pics on the D300 please!!! That's a neat looking setup.

See section 2&3 for your light placement requirements...if applicable.
D.O.T. Lighting Specs.

Well it's funny I was looking for a pattern on the net and couldn't really find one.....it's amazing that sometimes you have to type it just right and look at the screen with your head tilted to the side while the tip of your tongue is in your left nostril....to find something. Now that I've already done it....I found one.....isn't that the way it goes....anyways. I'll post this picture up in a little while.

yep that's sound about how you do it.

did you check the math? how far off was ya?

I bet you are real close.

Her it is I guess........no i haven't messed with yet to know if it's right or wrong.