Re: 600 cubic inch small block Chevy
[Re: STEFF]
#1771091
03/05/15 11:50 AM
03/05/15 11:50 AM
|
Joined: Nov 2009
Posts: 3,082 St. Paul , Mn.
tubtar
master
|
master
Joined: Nov 2009
Posts: 3,082
St. Paul , Mn.
|
Quote:
Quote:
I really don't see why it matter if its small or big ..its a bad mother either way..mopar is never going to step up with anything close ...
Chevy/GM didn't step up either. CFE did. There's nothing stopping anyone from developing something similar for a Mopar.
Or putting holes in the valve cover and calling it a Hemi.
|
|
|
Re: 600 cubic inch small block Chevy
[Re: dvw]
#1771093
03/05/15 04:56 PM
03/05/15 04:56 PM
|
Joined: Nov 2004
Posts: 6,890 North Alabama
Monte_Smith
master
|
master
Joined: Nov 2004
Posts: 6,890
North Alabama
|
Quote:
Quote:
Quote:
If a Mopar big block can't make adequate power with 4.800" bore centers at 600" why would this motor make power at 4.600"????????????????????? Doug
What's "adequate" power. This thing will go to a 4.500 bore. In the "real world", bore for bore, stroke for stroke, assuming heads equal, although the SBX head is a bad biotch, this and a similar constructed Mopar big block SHOULD make about the same power. But here is the kicker, THIS one, because of the "foundation" of the block, gets to run at a smallblock weight break, in a class based on that criteria. Now you can complain all you want, that it is NOT a real smallblock, but according to rules makers it is, because of what it was BASED from.
OK nice head. Why can this motor go 4.500" at 4.600" bore C/L? Assuming proper cylinder wall and deck thickness, could you go 4.700" on a 4.800"? Can a KB go 4.700" on standard bore C/L? Am I missing something? Obviously a very thin head gasket area between the cylinders. Doug
I don't know............all I did was relay what was stated in the article. I don't think about things that hard, that don't effect me. I don't care if anybody wants to call this a small block, a medium block or a big block. What damn difference does it make. The point is, it is very cool. Most Mopar guys are SO freaking defensive, to step up and "defend" the honor of the brand, that they ignore the obvious. And that is your BRAND deserted you. We as Mopar people don't have squat as compared to other brands and never will.
The Gen III Hemi is the ONLY place we even approach the competitive level of the competition, that being the LS........but it won't be long before we are also light years behind there as well. Cool LS parts are released every day..............the Gen III...........basically squat..........SO, same story, different verse.
|
|
|
Re: 600 cubic inch small block Chevy
[Re: Monte_Smith]
#1771096
03/05/15 10:27 PM
03/05/15 10:27 PM
|
Joined: Mar 2006
Posts: 9,871 MI, usa
dvw
master
|
master
Joined: Mar 2006
Posts: 9,871
MI, usa
|
Quote:
Quote:
Quote:
Quote:
If a Mopar big block can't make adequate power with 4.800" bore centers at 600" why would this motor make power at 4.600"????????????????????? Doug
What's "adequate" power. This thing will go to a 4.500 bore. In the "real world", bore for bore, stroke for stroke, assuming heads equal, although the SBX head is a bad biotch, this and a similar constructed Mopar big block SHOULD make about the same power. But here is the kicker, THIS one, because of the "foundation" of the block, gets to run at a smallblock weight break, in a class based on that criteria. Now you can complain all you want, that it is NOT a real smallblock, but according to rules makers it is, because of what it was BASED from.
OK nice head. Why can this motor go 4.500" at 4.600" bore C/L? Assuming proper cylinder wall and deck thickness, could you go 4.700" on a 4.800"? Can a KB go 4.700" on standard bore C/L? Am I missing something? Obviously a very thin head gasket area between the cylinders. Doug
I don't know............all I did was relay what was stated in the article. I don't think about things that hard, that don't effect me. I don't care if anybody wants to call this a small block, a medium block or a big block. What damn difference does it make. The point is, it is very cool. Most Mopar guys are SO freaking defensive, to step up and "defend" the honor of the brand, that they ignore the obvious. And that is your BRAND deserted you. We as Mopar people don't have squat as compared to other brands and never will.
The Gen III Hemi is the ONLY place we even approach the competitive level of the competition, that being the LS........but it won't be long before we are also light years behind there as well. Cool LS parts are released every day..............the Gen III...........basically squat..........SO, same story, different verse.
No just curious. As is well known bore size limits the valve size, especially on an inline head. The funny thing is the LS bores aren't all that big. Doug
|
|
|
Re: 600 cubic inch small block Chevy
[Re: Monte_Smith]
#1771098
03/06/15 01:17 AM
03/06/15 01:17 AM
|
Joined: Apr 2007
Posts: 2,028 Trumbull,CT.
jim sciortino
top fuel
|
top fuel
Joined: Apr 2007
Posts: 2,028
Trumbull,CT.
|
I don't know............all I did was relay what was stated in the article. I don't think about things that hard, that don't effect me. I don't care if anybody wants to call this a small block, a medium block or a big block. What damn difference does it make. The point is, it is very cool. Most Mopar guys are SO freaking defensive, to step up and "defend" the honor of the brand, that they ignore the obvious. And that is your BRAND deserted you. We as Mopar people don't have squat as compared to other brands and never will.
The Gen III Hemi is the ONLY place we even approach the competitive level of the competition, that being the LS........but it won't be long before we are also light years behind there as well. Cool LS parts are released every day..............the Gen III...........basically squat..........SO, same story, different verse.
This^^^^^^.
When I finally decide to rob a Brinks truck, there will be a Sonny's HEMI in my next car and I'll call it what !!! I !!! want.
|
|
|
Re: 600 cubic inch small block Chevy
[Re: jim sciortino]
#1771099
03/06/15 03:19 AM
03/06/15 03:19 AM
|
Joined: Aug 2007
Posts: 2,449 nc
earthmover
top fuel
|
top fuel
Joined: Aug 2007
Posts: 2,449
nc
|
|
|
|
Re: 600 cubic inch small block Chevy
[Re: earthmover]
#1771100
03/06/15 03:37 AM
03/06/15 03:37 AM
|
Joined: Nov 2004
Posts: 6,890 North Alabama
Monte_Smith
master
|
master
Joined: Nov 2004
Posts: 6,890
North Alabama
|
Quote:
die hard mopar guys talk about other brands and there own brand so it really don't matter what it is...most find something to nick pick about everything except there own stuff...would be n ice of we had more to pick from ......most the stuff we still have you can find in a old 1997 mag. only difference is the price now days...
1977.......... There.......fixed it for you......LOL!!!
|
|
|
|
|