nice sunny December day in Florida, pulled the car out and started some interior work.

Nice car, any more pictures?

sure

dash

sweet challenger!

time to get this air cleaner powder coated

since I can't find a way to fit this under the hood!

Very nice car!!

Great car, I thought that manifold would work with a T/A hood.

Sheldon

I'm going to try again. My body guy mocked it up and said no go. I know Super Stockers back in the day used it, but not sure if they spaced the K frame or it was a no air cleaner deal.

I see them on racecars, you are probably right, no aircleaner on them. You may be able to fit one of the narrow cast aluminum 6 pack aircleaners under that hood. I would keep trying.

I have some ideas if you are interested I did on another car. Got a T-ram to fit under the hood.

---

I'd be very interested on making the sixpack intake work. I've thought about sealing the air filter to the bottom of the scoop with no lid but not sure what clearance that would buy me

ok, it fits! just barely

about 1 1/2" from top of carbs to the underside of the hood scoop

Dang those look nice, Air Cleaners are overrated anyway.

Sheldon

I figure with a slight drop in the base I can seal the air filter directly to the hood with some foam. Air cleaner lid only when the hood is up

Yeah, maybe one of those "Shelby" style air cleaners like they ran on the GSS Demon six packs.

Sheldon

did some electrical work yesterday and finally found a pulley combination that works with the Denso Alternator and March kit, I still need to adjust the alternator spacers slightly