Previous Thread
Next Thread
Print Thread
Page 4 of 4 1 2 3 4
Re: Prepping an 8 3/4 for Paint or Powdercoating [Re: MuuMuu101] #1633670
07/30/14 12:13 AM
07/30/14 12:13 AM
Joined: Feb 2005
Posts: 318
Iowa
R
ratroaster Offline
enthusiast
ratroaster  Offline
enthusiast
R

Joined: Feb 2005
Posts: 318
Iowa
Metal first then the foam between the brake backing plate and bearing retainer.

Re: Prepping an 8 3/4 for Paint or Powdercoating [Re: ratroaster] #1633671
07/30/14 12:45 AM
07/30/14 12:45 AM
Joined: Dec 2010
Posts: 12,375
SoCal
MuuMuu101 Offline OP
I got lucky at Woodward!
MuuMuu101  Offline OP
I got lucky at Woodward!

Joined: Dec 2010
Posts: 12,375
SoCal
Quote:

Metal first then the foam between the brake backing plate and bearing retainer.




And if I'm not using the brake backing plate do I just slide in the axles?

Edit: Shoot... Just realized I'm going to need to order my brake kit first as it has billet adapters... To Be Continued later in the week.
http://www.doctordiff.com/rear-disc-brake-kit-11.7-rotor.html

Last edited by MuuMuu101; 07/30/14 12:58 AM.
Re: 8 3/4 Rebuild Questions from Disassembly to Assembly [Re: MuuMuu101] #1633672
08/15/14 12:20 AM
08/15/14 12:20 AM
Joined: Dec 2010
Posts: 12,375
SoCal
MuuMuu101 Offline OP
I got lucky at Woodward!
MuuMuu101  Offline OP
I got lucky at Woodward!

Joined: Dec 2010
Posts: 12,375
SoCal
I'm going to install my axles (since I got my brake kit in this week) either tonight or tomorrow. I'm a little bit nervous about getting the axle end play just right if anyone has any last minute tips and instructions of how to set up the diff. I really don't want to ruin a newly rebuilt diff.

Re: 8 3/4 Rebuild Questions from Disassembly to Assembly [Re: MuuMuu101] #1633673
08/15/14 01:19 AM
08/15/14 01:19 AM
Joined: Jul 2006
Posts: 4,319
Puyallup, WA
S
StealthWedge67 Offline
master
StealthWedge67  Offline
master
S

Joined: Jul 2006
Posts: 4,319
Puyallup, WA
You said you got all your stuff from Dr. Diff. You sure you don't have sealed (green) bearings. They don't take an endplay adjustment. Either way, I'd call Cass and ask him for tips on assembly. He'll give you the straight scoop and you won't have to wonder which of us idiots here knows what hes doing and which one doesn't. Everything in my rear-end came from Cass, and I can say that he is great about helping you with technical questions.


LemonWedge - Street heavy / Strip ready - 11.07 @ 120
Re: 8 3/4 Rebuild Questions from Disassembly to Assembly [Re: StealthWedge67] #1633674
08/15/14 01:22 AM
08/15/14 01:22 AM
Joined: Dec 2010
Posts: 12,375
SoCal
MuuMuu101 Offline OP
I got lucky at Woodward!
MuuMuu101  Offline OP
I got lucky at Woodward!

Joined: Dec 2010
Posts: 12,375
SoCal
Quote:

You said you got all your stuff from Dr. Diff. You sure you don't have sealed (green) bearings. They don't take an endplay adjustment. Either way, I'd call Cass and ask him for tips on assembly. He'll give you the straight scoop and you won't have to wonder which of us idiots here knows what hes doing and which one doesn't. Everything in my rear-end came from Cass, and I can say that he is great about helping you with technical questions.





Yeah, I got everything from Cass too and I made sure I got the tapered bearings. No green bearings for me. Maybe I'll call him tomorrow morning.

Re: 8 3/4 Rebuild Questions from Disassembly to Assembly [Re: MuuMuu101] #1633675
08/15/14 02:53 PM
08/15/14 02:53 PM
Joined: Dec 2010
Posts: 12,375
SoCal
MuuMuu101 Offline OP
I got lucky at Woodward!
MuuMuu101  Offline OP
I got lucky at Woodward!

Joined: Dec 2010
Posts: 12,375
SoCal
Based on his website, the web store is closed till Monday. I'll give him a call in a few to make sure.

Re: 8 3/4 Rebuild Questions from Disassembly to Assembly [Re: MuuMuu101] #1633676
08/15/14 05:29 PM
08/15/14 05:29 PM
Joined: Dec 2010
Posts: 12,375
SoCal
MuuMuu101 Offline OP
I got lucky at Woodward!
MuuMuu101  Offline OP
I got lucky at Woodward!

Joined: Dec 2010
Posts: 12,375
SoCal
No luck... Called and he's on vacation till Monday. He did leave some instructions in his brake kit packet so I'm going to try and see if I can figure it out.

Edit: Found some instructions in this thread...

https://board.moparts.org/ubbthreads/showflat.php?Cat=0&Number=7921567&Main=7718094

Last edited by MuuMuu101; 08/15/14 05:35 PM.
Re: 8 3/4 Rebuild Questions from Disassembly to Assembly [Re: MuuMuu101] #1633677
08/15/14 06:46 PM
08/15/14 06:46 PM
Joined: Dec 2010
Posts: 12,375
SoCal
MuuMuu101 Offline OP
I got lucky at Woodward!
MuuMuu101  Offline OP
I got lucky at Woodward!

Joined: Dec 2010
Posts: 12,375
SoCal
Ok, now I'm a little bit confused. set and bolted in the axles, but how do I adjust the axle play? There seems like there is little to no play on both sides no matter which way I spin the adjuster. I guess what I'm asking is what's acceptable so I don't eat wheel bearings?

Re: 8 3/4 Rebuild Questions from Disassembly to Assembly [Re: MuuMuu101] #1633678
08/16/14 02:10 AM
08/16/14 02:10 AM
Joined: Dec 2010
Posts: 12,375
SoCal
MuuMuu101 Offline OP
I got lucky at Woodward!
MuuMuu101  Offline OP
I got lucky at Woodward!

Joined: Dec 2010
Posts: 12,375
SoCal
A friend called me and helped me out. I got started bolting on all the brake stuff. Now all I have to do is manage the lines. Thanks for all your help!


Page 4 of 4 1 2 3 4






Powered by UBB.threads™ PHP Forum Software 7.7.1