Bog at full throttle - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech Bog at full throttle

Print Thread

Page 2 of 2

1

2

Re: Bog at full throttle UPDATED [Re: ajcasini] #1611278 04/28/14 12:11 AM 04/28/14 12:11 AM
Joined: Dec 2004 Posts: 415 New Braunfels, TX 4 416challenger OP mopar
416challenger OP mopar 4 Joined: Dec 2004 Posts: 415 New Braunfels, TX	The ifrs are located towards the top of the metering blocks. The idle screws are about a turn and a half out. The transition slot is set about .020, looks like a square. The carb has the idle ease function similar to the Demon carbs. Your turn a screw underneath where the carb air cleaner stud is installed.

Re: Bog at full throttle UPDATED [Re: 416challenger] #1611279 04/28/14 07:27 AM 04/28/14 07:27 AM
Joined: Feb 2006 Posts: 686 PA A ajcasini mopar
ajcasini mopar A Joined: Feb 2006 Posts: 686 PA	Okay do you have the idle ease screw turned at all? If so crank that baby closed. That can be causing us issues. We don't need that to make the car idle. If open close that down tight and we can tube from there.

Re: Bog at full throttle UPDATED [Re: ajcasini] #1611280 04/28/14 01:52 PM 04/28/14 01:52 PM
Joined: Dec 2004 Posts: 415 New Braunfels, TX 4 416challenger OP mopar
416challenger OP mopar 4 Joined: Dec 2004 Posts: 415 New Braunfels, TX	The idle ease screw is currently opened. I will close it and make the idle adjustment with the secondaries.

Page 2 of 2

1

2

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1