Is this possible? - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech Is this possible?

Print Thread

Page 2 of 2

1

2

Re: Is this possible? [Re: GTX MATT] #1576396 02/12/14 08:10 PM 02/12/14 08:10 PM
Joined: Oct 2003 Posts: 3,698 NE Oklahoma V Von master
Von master V Joined: Oct 2003 Posts: 3,698 NE Oklahoma	[quote Depending on how much bowl work was done they may flow 250-260 cfm or so. Are the heads 346s or 452s by chance? A basic bowl blend by somebody knowledgable will get a stock valve 346 in the 260 range. 72 RR, Pump gas 440, 452s, 3800 lbs, Corked, ET Radials,. 11.33@117.72. Same car, bone stock 346s, 9.5 comp, baby solid. 12.24@110.

Re: Is this possible? [Re: GTX MATT] #1576397 02/12/14 09:09 PM 02/12/14 09:09 PM
Joined: Feb 2005 Posts: 4,314 Prospect, PA BSB67 master
BSB67 master Joined: Feb 2005 Posts: 4,314 Prospect, PA	Quote: , and he has headwork that the pure stock guys don't have.

Re: Is this possible? [Re: dvw] #1576398 02/12/14 09:18 PM 02/12/14 09:18 PM
Joined: Feb 2005 Posts: 4,314 Prospect, PA BSB67 master
BSB67 master Joined: Feb 2005 Posts: 4,314 Prospect, PA	Quote: Car has to weigh at least 3800 lbs. Do the math, 426 HP is not going to go [Email]114@3800.[/Email] At best 110-111. And I'll bet it's closer to 3900-4000lbs. Am I correct? Doug Agreed. I just don't know with certainty any specifics about the car. It could weigh 3500 lbs and the track day could have been -2000 DA. Unlikely of course. Last edited by BSB67; 02/12/14 09:18 PM.

Re: Is this possible? [Re: BSB67] #1576399 02/12/14 09:20 PM 02/12/14 09:20 PM
Joined: Nov 2003 Posts: 5,160 Texas dannysbee master
dannysbee master Joined: Nov 2003 Posts: 5,160 Texas	Quote: Quote: , and he has headwork that the pure stock guys should not have. There you go fix it for you. Getting old just means you were smarter than some and luckier than others.

Re: Is this possible? [Re: dannysbee] #1576400 02/12/14 09:49 PM 02/12/14 09:49 PM
Joined: Jun 2006 Posts: 5,162 CT GTX MATT master
GTX MATT master Joined: Jun 2006 Posts: 5,162 CT	Quote: Quote: Quote: , and he has headwork that the pure stock guys should not have. There you go fix it for you. You do have a point Russ Now I need to pin those needles, got to feel that heat Hear my motor screamin while I'm tearin up the street

Page 2 of 2

1

2

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1