Best way to remove rust and paint - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer Best way to remove rust and paint

Print Thread

Page 2 of 2

1

2

Re: Best way to remove rust and paint [Re: 70Cuda383] #156136 11/25/08 01:55 PM 11/25/08 01:55 PM
Joined: Feb 2003 Posts: 21,318 Manitoba, Canada DaytonaTurbo Too Many Posts
DaytonaTurbo Too Many Posts Joined: Feb 2003 Posts: 21,318 Manitoba, Canada	Quote: I burnt up a drill using wire wheels to clean up rust on my floor. I've got a good, pre wal-mart era drill. It's never missed a beat with the 1/2 dozen floors I've cleaned with the wire wheel. I like the wire wheels for stuff like floors because they don't wear out like the 3m discs that don't last long at all.

Re: Best way to remove rust and paint [Re: DaytonaTurbo] #156137 11/25/08 03:50 PM 11/25/08 03:50 PM
Joined: Aug 2004 Posts: 3,343 MARYLAND 69Cuda340S master
69Cuda340S master Joined: Aug 2004 Posts: 3,343 MARYLAND	I use both a cup and disc in a 4 1/2" angle grinder to strip metal. It works well and leaves the metal nice and smooth.

Re: Best way to remove rust and paint [Re: 69Cuda340S] #156138 11/25/08 04:50 PM 11/25/08 04:50 PM
Joined: Jan 2003 Posts: 28,730 Shopping @ HoBo Fright 340SIX OP Doc Flappergas's Evil Twin
340SIX OP Doc Flappergas's Evil Twin Joined: Jan 2003 Posts: 28,730 Shopping @ HoBo Fright	Quote: I use both a cup and disc in a 4 1/2" angle grinder to strip metal. It works well and leaves the metal nice and smooth. I had a wire cup for my grinder i tried it on my trailers diamond plate it worked well but soon after it was turning the metal a black color but wasd still removing paint and rust. Back then plan was to do the whole deck with the grinder wipe with DX579{ppg} laqure thinner and epoxy prime followed by paint. I never got around to it but wondered if the blacking was going to be a problem? Thus the reason for this thread. Just looking at opinons on What worked for others since a plan/system would benefit lots of apps. Thanks for all the input so far

Re: Best way to remove rust and paint [Re: 340SIX] #156139 11/25/08 05:56 PM 11/25/08 05:56 PM
Joined: Aug 2004 Posts: 721 Seminole County FL to Plymouth... Barry70GTX super stock
Barry70GTX super stock Joined: Aug 2004 Posts: 721 Seminole County FL to Plymouth...	As far blasting goes I paid 2K for new grass sod and wife looked at me like BUT as of This morn she gave the go ahead to blast what Ineed to Can't say that I blame her. But you better hurry if she's opened the door for you. This guy looks like he could have handled the body shop. 4838737-P9010024.jpg (101 downloads) NMCA NSS 67 Coronet

Re: Best way to remove rust and paint #156140 11/25/08 06:46 PM 11/25/08 06:46 PM
Joined: Sep 2007 Posts: 710 STEELER NATION!!! Skeez Pretty in Pink
Skeez Pretty in Pink Joined: Sep 2007 Posts: 710 STEELER NATION!!!	Quote: Skeez- Can you please post a bigger pic of your avatar? Can't quite make out what it says.. Looks intersting.

Re: Best way to remove rust and paint [Re: Barry70GTX] #156141 11/25/08 08:04 PM 11/25/08 08:04 PM
Joined: Jan 2003 Posts: 28,730 Shopping @ HoBo Fright 340SIX OP Doc Flappergas's Evil Twin
340SIX OP Doc Flappergas's Evil Twin Joined: Jan 2003 Posts: 28,730 Shopping @ HoBo Fright	Funny thing is I used to take the owner of the shop shooting with me about once a month. he was not scared of me but was deathly scared of my wife when he gave the car back looking like that. she showed up there and he ran and hid in a car at the shop. He went out oweing everyone plenty lost the building ect. It could have been worse he gave me a heads up to get what was mine before the I have seen cars tied up with that before

Page 2 of 2

1

2

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1