Re: Finally IT happened......Monte told me so LOL
[Re: n20mstr]
#148611
11/11/08 06:31 PM
11/11/08 06:31 PM
|
Anonymous
Unregistered
|
Anonymous
Unregistered
|
That car needs its own class: Scary Stock!
|
|
|
Re: Finally IT happened......Monte told me so LOL
[Re: n20mstr]
#148612
11/11/08 07:43 PM
11/11/08 07:43 PM
|
Joined: Dec 2005
Posts: 541 South Carolina
a408swinger
mopar addict
|
mopar addict
Joined: Dec 2005
Posts: 541
South Carolina
|
Quote:
Quote:
Cool! (well not the damage..) What does it run on the motor, and how much jooos?
last time i ran it on motor it had 4.10 gears, it went 9.85 At 134. Now it has 3.70 gears, i have never run it on motor with the 3.70's
how much nitrous??? well .070 jet in a plate, and .032 in a fogger, jet area adds up to .114 so about 375-400 hp
we had to go over the scales yesterday, it was 3515lbs
Did you have the fogger square jetted? How about the plate? I was running a 87n/91f combo in my plate and a 24/24 jet combo in the fogger in a 408" indy headed smallblock. car ran a best of 6.19 @ 111.5 on motor and a 5.50 @ 126 on just the plate. I hit the second kit (fogger) after it spun the tires one time and it went 132mph but still only went a 5.50 because of the bad 60'. Last time at the track I hit the second kit and burned a ground strap on #4 and melted some of the piston too. I was told it was too rich but it appears that to me that it was too lean. Im almost afraid to try to lean it out after burning a piston but Im being told that too fat is what caused the damage. I was running 16* total timing and was told that was too much as well. It needed to be at 12*.
|
|
|
Re: Finally IT happened......Monte told me so LOL
[Re: a408swinger]
#148613
11/11/08 09:56 PM
11/11/08 09:56 PM
|
Joined: Aug 2003
Posts: 4,703 On the parachute mount
n20mstr
OP
master
|
OP
master
Joined: Aug 2003
Posts: 4,703
On the parachute mount
|
i am leary to post my tune up, because as someone told me, they read your post and then burn [Edited by Moparts - Keep it clean] up and blame it on you....LOL
You havene listed any fuel psi with your jetting, i was 5.2 on the plate, and 5.2 on the fogger, fogger was 32n 28f, now you see me, i made 140++ passes, not all with that jetting, but all were with nitrous, Obviously your motor didnt like something, most likely it was timing, like i have been told, it takes a lot to lean the fuel out and hurt it. My problem i think is too fat, (only recently have i leaned it out a lot) and combination of parts that were never intended to see 300+ nitrous oxide ( Moly rings, and a Shelf piston) If you use nitrous, and you want to go fast, you have to expect some carnage, its all part of the learning curve.
All that being said, what fuel psi did you have in your kits?? What fuel were you using??
....BAD A$$ STREET CAR.....
|
|
|
Re: Finally IT happened......Monte told me so LOL
[Re: n20mstr]
#148614
11/11/08 11:39 PM
11/11/08 11:39 PM
|
Joined: Feb 2007
Posts: 633 NY/NJ
DV8
mopar addict
|
mopar addict
Joined: Feb 2007
Posts: 633
NY/NJ
|
Quote:
i am leary to post my tune up, because as someone told me, they read your post and then burn [Edited by Moparts - Keep it clean] up and blame it on you....LOL
You havene listed any fuel psi with your jetting, i was 5.2 on the plate, and 5.2 on the fogger, fogger was 32n 28f, now you see me, i made 140++ passes, not all with that jetting, but all were with nitrous, Obviously your motor didnt like something, most likely it was timing, like i have been told, it takes a lot to lean the fuel out and hurt it. My problem i think is too fat, (only recently have i leaned it out a lot) and combination of parts that were never intended to see 300+ nitrous oxide ( Moly rings, and a Shelf piston) If you use nitrous, and you want to go fast, you have to expect some carnage, its all part of the learning curve.
All that being said, what fuel psi did you have in your kits?? What fuel were you using??
...so you gonna go gangsta for that 636" B1 & 3 stages now huh?...
~S~
"The function of man is to live, not exist..."
|
|
|
Re: Finally IT happened......Monte told me so LOL
[Re: DV8]
#148615
01/02/09 07:35 PM
01/02/09 07:35 PM
|
Joined: Aug 2003
Posts: 4,703 On the parachute mount
n20mstr
OP
master
|
OP
master
Joined: Aug 2003
Posts: 4,703
On the parachute mount
|
Well upon disassmbly, all i can see is the second ring is pinched on the #8 piston. I measured the top alomst all the way around and the deck ht was still the same, it hasnt lifted the top of the piston at all. But the second ring is TIGHT actually it doesnt move at all LOL LOL. Other than that, the rest of the pistons all look good..
....BAD A$$ STREET CAR.....
|
|
|
Re: Finally IT happened......Monte told me so LOL
[Re: moparniac]
#148621
01/02/09 10:01 PM
01/02/09 10:01 PM
|
Joined: Aug 2003
Posts: 4,703 On the parachute mount
n20mstr
OP
master
|
OP
master
Joined: Aug 2003
Posts: 4,703
On the parachute mount
|
i didnt ask him to come to me, i said to meet half way for each of us ....AT A MOPAR RACE...Ohio, Rockingham, Etc..... read it for yourself..http://www.yellowbullet.com/forum/showthread.php?t=83493&highlight=1fastmopar
Last edited by n20mstr; 01/02/09 10:09 PM.
....BAD A$$ STREET CAR.....
|
|
|
Re: Finally IT happened......Monte told me so LOL
[Re: B1Fish540]
#148623
01/03/09 03:37 AM
01/03/09 03:37 AM
|
Joined: Nov 2004
Posts: 6,890 North Alabama
Monte_Smith
master
|
master
Joined: Nov 2004
Posts: 6,890
North Alabama
|
I am definitely not defending Eddie here. As most know, I think he runs his mouth too much, is full of hot air and I give him grief often...however...when YOU call a man out and then HE won't come 1,000 miles to race you in your backyard, there is not really a whole lot you can say. Eddie lives in south Florida. He has to drive 400 miles, just to get out of his home state. I am a little out of the way, but Englishtown is 1150 miles for me and Moroso is nearly 900 miles from me. So somehwere around the Tennessee area is halfway for Eddie, not Ohio. That would kinda be like Al Alguire calling me out and them claiming I was afraid, because I would not drive to Phoenix to race him. If you are doing the calling out, you should be willing to travel to prove your point. At least that is how I see it.
Monte
|
|
|
Re: Finally IT happened......Monte told me so LOL
[Re: n20mstr]
#148624
01/03/09 03:38 AM
01/03/09 03:38 AM
|
Joined: Feb 2008
Posts: 452 Monrovia, So-Cal, USA
racerhog
mopar
|
mopar
Joined: Feb 2008
Posts: 452
Monrovia, So-Cal, USA
|
Fix the ring land and put a new ring on it and throw it back in for somemore good runs...... They run best just before....Well you know....
Bob(Cowboy)Hogan Monrovia So-Cal
|
|
|
Re: Finally IT happened......Monte told me so LOL
[Re: Monte_Smith]
#148625
01/03/09 03:44 AM
01/03/09 03:44 AM
|
Joined: Feb 2007
Posts: 6,295 U.S.
moparniac
master
|
master
Joined: Feb 2007
Posts: 6,295
U.S.
|
Quote:
I am definitely not defending Eddie here. As most know, I think he runs his mouth too much, is full of hot air and I give him grief often...however...when YOU call a man out and then HE won't come 1,000 miles to race you in your backyard, there is not really a whole lot you can say. Eddie lives in south Florida. He has to drive 400 miles, just to get out of his home state. I am a little out of the way, but Englishtown is 1150 miles for me and Moroso is nearly 900 miles from me. So somehwere around the Tennessee area is halfway for Eddie, not Ohio. That would kinda be like Al Alguire calling me out and them claiming I was afraid, because I would not drive to Phoenix to race him. If you are doing the calling out, you should be willing to travel to prove your point. At least that is how I see it.
Monte
me too ...
Mopar Performance
|
|
|
|
|