It's a 15 x 12 with 10" of backspace. DUHHH

Where are the Mods when you need them? I think this guy needs a few days in the penalty box.

R.

FWIW, the question probably could have been asked a little differently/better. But basically someone who has a Dart Sport, Demon or Duster with a 9-10 rim and 9" slick would be best qualified to answer based on how the tire sits in the wheelwell. But even then, it would be an approximation.
My Holeshot wheels/Hoosier radial slicks fit the wheelwells of my car about the same as in the pic. They have a 4 7/8" backspace. (Holeshots are normally made in incremental 1" backspaces - i.e.: 3 7/8", 4 7/8", etc.) But since my springs are installed with a 3/4" offset kit, I'm not sure how it would fit with the SS springs in the OEM location. (The 3/4" kit doesn't appear to move the springs in a full 3/4".) I hope to figure that out one of these days.

wow I really stirred up the pot not my intention if i misworded the question I honestly thought I would get a diffrent response, thanks for all the information,, i had enough basshing for one post no? any way I orderd the wheels and tires thanks to a couple pm from members thanks guys

Be careful your title doesn't change Mike.

Quote:

---

All the smart guys are the ones with the distributer in the back...... you should know that by now Mike!

---

We have a bunch of early Hemi racers here?

Probably..........ziti w/meatballs.

SHINNY.

Hey, I like fun as much as the next guy. And I'm not afraid to tell someone they're wrong about something that's in my area of expertise. But calling two different, experienced members of the board "morons" is something that I wouldn't do on my worst day, and for me that was over the line.

R.