|
|
|
Re: Engine install from a dolly. With pics!
[Re: HEMIDOG 70]
#1421524
04/25/13 11:44 AM
04/25/13 11:44 AM
|
Joined: Sep 2003
Posts: 3,426
weymouth,mass.
meepmeep70
master
|
master
Joined: Sep 2003
Posts: 3,426
weymouth,mass.
|
Quote:
U.S. Car tool 3 wheel cart here. We had to leave the valve covers off for the Hemi to go in from below.
cinder blocks pieces of wood=big balls 
|
|
|
Re: Engine install from a dolly. With pics!
[Re: meepmeep70]
#1421525
04/25/13 12:14 PM
04/25/13 12:14 PM
|
Joined: Nov 2003
Posts: 5,048
Atlanta Indiana
Dave Watt
master
|
master
Joined: Nov 2003
Posts: 5,048
Atlanta Indiana
|
Quote:
cinder blocks pieces of wood=big balls
Made me nervous and it wasn't even my car!
|
|
|
Re: Engine install from a dolly. With pics!
[Re: HEMIDOG 70]
#1421528
04/26/13 11:58 AM
04/26/13 11:58 AM
|
Joined: Sep 2003
Posts: 3,426
weymouth,mass.
meepmeep70
master
|
master
Joined: Sep 2003
Posts: 3,426
weymouth,mass.
|
Quote:
 The blocks were solid and the wood had chalks screwed into them. Ideal no. But it worked and we kept jack stands under it. Yes I was very nervous during the lift.  The picture was taken at the worst part of the lift. Jack stands were extended and placed front and rear during the process. As far as the valve covers not staying on. The Stage V Barton covers are slightly larger and will not fit between the inner fenders from the bottom.
ok when i jack it up you roll under with the engine, ok? say what
|
|
|
Re: Engine install from a dolly. With pics!
[Re: meepmeep70]
#1421529
04/26/13 11:59 AM
04/26/13 11:59 AM
|
Joined: Sep 2003
Posts: 3,426
weymouth,mass.
meepmeep70
master
|
master
Joined: Sep 2003
Posts: 3,426
weymouth,mass.
|
Quote:
Quote:
The blocks were solid and the wood had chalks screwed into them. Ideal no. But it worked and we kept jack stands under it. Yes I was very nervous during the lift. The picture was taken at the worst part of the lift. Jack stands were extended and placed front and rear during the process. As far as the valve covers not staying on. The Stage V Barton covers are slightly larger and will not fit between the inner fenders from the bottom.
at least it worked 
ok when i jack it up you roll under with the engine, ok? say what
|
|
|
|
|
|
|
