|
Re: Interest in M code exhaust manifold A body??
[Re: drgordi]
#1405442
01/28/14 12:05 PM
01/28/14 12:05 PM
|
Joined: Jan 2003
Posts: 44,049
Round Lake Beach, Illinoisy
Rhinodart
Rhinotruck
|
Rhinotruck
Joined: Jan 2003
Posts: 44,049
Round Lake Beach, Illinoisy
|
Quote:
Good thing I don't have to look for a set, mine still has the originals. By the time this is all said and done there will be more M CODE cars than the factory made. Mine are for sale and also come with the car $30,000 and you don't have to do any r&d to use them. Just my thought on this it should be like getting a fender tag made unless you have documentation of ownership then you can't get an exact copy, just a reproduction without part numbers.
I don't think anyone would clone a 440 A-Body around $1200 exhaust manifolds!  Besides, there were 640 Darts made and very few have been found intact, so there must be plenty out there left to be restored!  
The funny thing about science is that if you change one miniscule parameter you change the entire outcome to the way you want it.
JB Rhinehart, Realist
A-Body's RULE!
|
|
|
Re: Interest in M code exhaust manifold A body??
[Re: toplescuda]
#1405444
01/29/14 10:03 AM
01/29/14 10:03 AM
|
Joined: Dec 2006
Posts: 3,533
Indiana
Fury Fan
master
|
master
Joined: Dec 2006
Posts: 3,533
Indiana
|
Quote:
Would 3d printing be helpfull in making molds for this? heck they can make a gun with it and it works
Yeah, it probably would be helpful for making the part to form the molding sand around for the cope and drag (for those wondering, those are the 2 molds that form the outer surfaces of the part). The printing I mentioned earlier was for the cores, so they actually need to be a special printable sand that doesn't melt when the alum or iron is poured in.
Parts I seek:
driver doorpanel, 65 Sport Fury, prefer black, needs to be 7-8 on 10 scale, might buy set
16" x 6" Dodge truck wheel(s), from early 70s?, takes 9" dogdish - need for a research job so cheaper is better.
69-73 C-body caliper brackets and/or splashields
Send a PM.
|
|
|
Re: Interest in M code exhaust manifold A body??
[Re: Oneida Garage]
#1405445
02/19/14 08:01 PM
02/19/14 08:01 PM
|
Joined: Jan 2004
Posts: 8,926
fredericksburg,va
cudaman1969
Itch Nutz
|
Itch Nutz
Joined: Jan 2004
Posts: 8,926
fredericksburg,va
|
Quote:
Many thanks for the replies.
The complexity of the casting itself is not lost on me.
Financially speaking, I see this as a high-risk, zero-reward proposition. My eyes are wide open on that one.
But simply, as far as the cars are concerned, I think this is something that needs to be done. Were I the lucky owner of a brand-new '69 M-code dart, I'd have thrown those manifolds in the dumpster immediately, like most everyone else did.
My set were taken of after 13 miles, put on a shelf till i bought them,still factory fresh and so glad he saved them. I'm standing on the fence on this issue because the manifold is one of the items that define an M-code unlike taillights, grills,etc. Will it degrade the real cars? Who's to say. Accurate ex. made some C-body manifolds for this car in place of original, i'm thinking of doing this and have the real one in the trunk,scared of cracking it. I plan on driving mine.
|
|
|
Re: Interest in M code exhaust manifold A body??
[Re: Rhinodart]
#1405447
02/20/14 03:16 PM
02/20/14 03:16 PM
|
Joined: Jan 2003
Posts: 5,784
Corpus Christi, TX
shanker
master
|
master
Joined: Jan 2003
Posts: 5,784
Corpus Christi, TX
|
The only way to get this to work, would be with the people who are target "consumers" to become "Investors"...that way the risk is shared as well as the reward.
If 2 years down the line and some of the castings start to crack or have any problems, the "Investors" realized that going into an investment to get correct manifolds for their cars and could contact the manufacturer (company that casted) them directly, or take them to a machine shop and repair them on their own dime.
The Federal Government has not yet learned that you cannot legislate morality
1970 Coronet R/T FF4/FF8/V85/V1G 440/Auto/3.23
1970 Coronet R/T FK5/FK5/V8W/V1W 440/Auto/3.55
1970 Super Bee TX9/TX9/V8W/N96 383/Auto/3.91
1975 Duster 360 VS29L5 Daily Driver
|
|
|
Re: Interest in M code exhaust manifold A body??
[Re: Rhinodart]
#1405449
09/05/14 08:26 AM
09/05/14 08:26 AM
|
Joined: Jan 2003
Posts: 4,301
Florida
blewbyu
master
|
master
Joined: Jan 2003
Posts: 4,301
Florida
|
Quote:
Bringing this back up again as I just got an email from a man who wants to make them for sure! Need to really find out who is really serious. 
Do you know a cost yet?
|
|
|
Re: Interest in M code exhaust manifold A body??
[Re: 68mannix]
#1405451
09/05/14 07:00 PM
09/05/14 07:00 PM
|
Joined: Jan 2003
Posts: 4,301
Florida
blewbyu
master
|
master
Joined: Jan 2003
Posts: 4,301
Florida
|
Quote:
Didnt you just by a set for around 1800?
Hell yes I did, am I not allowed to ask? 
|
|
|
|
|
