'02 Dodge Ram 2500 clutch problem - Moparts Forums

Register Log In Moparts Forums Sandy's Truck Shop '02 Dodge Ram 2500 clutch problem

Print Thread

'02 Dodge Ram 2500 clutch problem #1402391 03/14/13 10:36 AM 03/14/13 10:36 AM
Joined: Aug 2003 Posts: 4,463 Rome, PA Ryan_340 OP master
Ryan_340 OP master Joined: Aug 2003 Posts: 4,463 Rome, PA	I have a '02 Dodge Ram 2500 5.9 V8 5spd. About 1,500 miles ago I installed a new clutch: http://www.summitracing.com/parts/zzz-mu72108-1/overview/make/dodge/model/ram-2500/year/2002 And a new master and slave cylinder assembly, the problem I am having is my clutch is VERY VERY soft and it doesnt grab until almost completely realeased at the top of the pedal. Any ideas??? 1972 Power Wagon W100 1973 Power Wagon W200 1971 Duster 1972 Dart Swinger 3-1972 Demons

Re: '02 Dodge Ram 2500 clutch problem [Re: Ryan_340] #1402392 03/15/13 08:14 PM 03/15/13 08:14 PM
Joined: May 2003 Posts: 13,189 aZLiViN J J_BODY I Live Here
J_BODY I Live Here J Joined: May 2003 Posts: 13,189 aZLiViN	I'll wait for a pro stick guy to pop in on this..... but I'm betting you are going to end up putting a different clutch (factory) one in it.

Re: '02 Dodge Ram 2500 clutch problem [Re: Ryan_340] #1402393 03/15/13 10:52 PM 03/15/13 10:52 PM
Joined: Apr 2004 Posts: 684 Maine J jerseybud mopar
jerseybud mopar J Joined: Apr 2004 Posts: 684 Maine	Air in the hydraulics still? Maybe an internal hydraulic leak past a faulty seal in the master or slave cylinder? (Had a John Deere 3055 do that once) I know the new stuff sometimes comes as an assembly, but sometimes there is a little allen screw that acts as a bleeder and you can loosen the screw and slave cylinder and with a helper, bleed the whole system.

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1