Pushrod oiling with EDM lifters - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech Pushrod oiling with EDM lifters

Print Thread

Page 2 of 2

1

2

Re: Pushrod oiling with EDM lifters [Re: hemi-itis] #1390793 02/21/13 02:19 AM 02/21/13 02:19 AM
Joined: Jan 2003 Posts: 27,421 Balt. Md 3 383man Too Many Posts
383man Too Many Posts 3 Joined: Jan 2003 Posts: 27,421 Balt. Md	The ones I am talking about are the solid flat tappet type that I used. I have not used a roller cam but Mr P-Body was talking about roller lifters also. Ron

Re: Pushrod oiling with EDM lifters [Re: Verga] #1390794 02/21/13 06:57 PM 02/21/13 06:57 PM
Joined: Jan 2003 Posts: 75,125 A Banana Republic near you. JohnRR I Win
JohnRR I Win Joined: Jan 2003 Posts: 75,125 A Banana Republic near you.	Quote: JK... I have a set of the howards BB mopar EDM solid lifters...which as Ive said at least once...are actually AMC lifters (not that it makes a rats behind)...based on the cup height....oil band height...etc. I have a set of them also, I also have a set of Crower cam saver hydraulics , they are the same part number for Mopar and AMC , I put a set ina 440 that got custom pushrods , I haven't compared them to real Mopar lifters yet , maybe I should ???

Page 2 of 2

1

2

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1