Any issues with the FBO dizzy plate? - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer Any issues with the FBO dizzy plate?

Print Thread

Any issues with the FBO dizzy plate? #1369226 01/13/13 09:25 PM 01/13/13 09:25 PM
Joined: May 2005 Posts: 4,753 Florida BDW OP master
BDW OP master Joined: May 2005 Posts: 4,753 Florida	Welding is not an option for me, this FBO plate looks to be a good alternative? I guess you just add it below the stock limiting assembly? Thoughts, pro or con?

Re: Any issues with the FBO dizzy plate? [Re: BDW] #1369227 01/13/13 09:31 PM 01/13/13 09:31 PM
Joined: Dec 2004 Posts: 10,558 Rittman Ohio fourgearsavoy I Live Here
fourgearsavoy I Live Here Joined: Dec 2004 Posts: 10,558 Rittman Ohio	Looks like great idea to me although I have never used one the execution looks viable to me Gus 7545621-mysavoy.jpg (47 downloads) 64 Plymouth Savoy 493 Indy EZ's by Nick at Compu-Flow 5-Speed Richmond faceplate Liberty box Dana 60

Re: Any issues with the FBO dizzy plate? [Re: fourgearsavoy] #1369228 01/14/13 11:46 AM 01/14/13 11:46 AM
Joined: Jan 2003 Posts: 2,325 L�ffingen, Germany The_Mean_Machine top fuel
The_Mean_Machine top fuel Joined: Jan 2003 Posts: 2,325 L�ffingen, Germany	I used 3 or 4 so far on different engines. Very easy to work with... MeanMachine Cars

Re: Any issues with the FBO dizzy plate? [Re: The_Mean_Machine] #1369229 01/14/13 02:36 PM 01/14/13 02:36 PM
Joined: Sep 2006 Posts: 1,139 West Tennessee R rbstroker super stock
rbstroker super stock R Joined: Sep 2006 Posts: 1,139 West Tennessee	It works well for me. This is the land of the free because of the brave

Re: Any issues with the FBO dizzy plate? [Re: BDW] #1369230 01/14/13 06:06 PM 01/14/13 06:06 PM
Joined: Nov 2003 Posts: 36,041 Lincoln Nebraska R RapidRobert Circle Track
RapidRobert Circle Track R Joined: Nov 2003 Posts: 36,041 Lincoln Nebraska	Quote: Thoughts, pro or con? Never used it so I dont know if the FBO plate slot length is dead on accurate for the listed advance #'s or not but you only have 3 selections that I can see (other than zero (locked) and the ideal initial could be anywhere which means the mechanical (slot lemgth) could be anywhere (though the tried & true totals of 35 for a SB and 36-38 for a BB & 31 for a magnum are a VERY GOOD starting points). Since the clip has to come out either way to alter it with or without the plate I'd suggest doing without & welding up the slots then filing them down to get the exact amt of mechanical advance you need. the chart in the archives is reportedly ballpark close (so start slightly conservative) & that'd be a good starting point once you know how many degrees you're after EDIT forgot that welding is not an option for you. I'd think a person could file the FBO slots assuming they ain't too long as is Last edited by RapidRobert; 01/14/13 06:26 PM. live every 24 hour block of time like it's your last day on earth

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1