car is prepped, taped, and ready to be sealed and edged in black DCC.

front shot.

sealed with epoxy primer DP90LF

edged in DCC black

engine compartment

inside

trunk

inside firewall area

You should change your name to RustproofBeeper! This car should last forever when you get done w/ it. Your attention to detail w/ the metal work is awesome. Beautiful work!

starting to look like something.

Can't wait to see this done.

Great car.

Great thread.

Good job man.

car is back on the rotisserie and the lower front rocker/pinch welds are being finished.

underside of front framerails all nicey nice!

passenger side rear area rocker panel /pinch weld all finished up.

I wish I could do that kind bodywork!

good luck with the progress !

Carsten

I got the Road Runner back on its side to do the finish body work on the passenger side. I use a product by USC call all metal to do the initial work then finish with 3M gold filler or 3M top coat or metal glaze.

This stuff is great!

Heres the car with a light coat of 3M body filler. Should be finished with this side today. If your wondering the car had rocker moldings and no wheel lip moldings. I removed and welded up the holes in the rockers for the molding clips. not a fan of chrome on Road Runners.

I have yet to use that All Metal filler but a friend of mine who restored his 72 challenger swore by it and has had great success with it. Doesn't it have aluminum metal particles in bedded in it?
Pat