Previous Thread
Next Thread
Print Thread
Page 2 of 2 1 2
Re: any one using 383's to race [Re: 1badrt] #1156674
03/01/12 11:36 PM
03/01/12 11:36 PM
Joined: May 2003
Posts: 854
Bloomingdale , OH
super451b Offline
super stock
super451b  Offline
super stock

Joined: May 2003
Posts: 854
Bloomingdale , OH
Ran a 383 for years. Best was 11.17 @ 120. 452 heads, 13:1, 590 cam , shifted at 6800. I still have it as a back up motor.

Re: any one using 383's to race [Re: 1badrt] #1156675
03/02/12 07:20 PM
03/02/12 07:20 PM
Joined: Nov 2008
Posts: 363
Aubrey, Texas
O
oldtimer5151 Offline
enthusiast
oldtimer5151  Offline
enthusiast
O

Joined: Nov 2008
Posts: 363
Aubrey, Texas
.060 over 383 with old trw pistons, h beam rods, e-rpm heads flowed to 324 cfm. @.600 lift, and main stud girdle. 5.13 gears with super stock springs and car weighs 3200 with driver. Cuda runs 6.90`s with 200#s in front of rear bumper for ballast. The cam is a bullet cam for a 383. You will have to shift early in first gear to make it think it is a powerglide! The 383 is completely different from the 440 and advance the camshaft so. I used the rpm heads because velosity is important for the short stroke to make power.

Page 2 of 2 1 2






Powered by UBB.threads™ PHP Forum Software 7.7.1