Re: Slow Mopars
[Re: 340man4ever]
#1153001
01/10/12 11:47 AM
01/10/12 11:47 AM
|
Joined: Nov 2003
Posts: 6,293 Rock Springs
Bob_Coomer
master
|
master
Joined: Nov 2003
Posts: 6,293
Rock Springs
|
They are W2's... Home Ported, with a set of Gold Crane rockers. He races all the Chrysler series over here on the east Coast... He hardly misses a race.... He dyno'd the engine when it was first assemble. It did make 630hp, and the dyno has been known to be accurate.
[color:"red"]65 Hemi Belvedere coming soon [/color] [color:"#00FF00"]557" Indy engine 1.07 60ft 144mph in the 8th 2100 lbs package [/color]
|
|
|
Re: Slow Mopars
[Re: slippery440]
#1153002
01/10/12 01:30 PM
01/10/12 01:30 PM
|
Joined: Jan 2003
Posts: 644 Owego, NY
JBurch
mopar
|
mopar
Joined: Jan 2003
Posts: 644
Owego, NY
|
Vic, I gotta tell you, my Junk 65 Barracuda, is Junkier than yours!!!!!!!!!!!!!
It's not as rough as it was when I got it; it doesn't have a Fred Flintstone floor pan any more, nor do the quarters have holes you can put your head thru. It's flat black, pained with a brush, I embrace it's crudeness!! It's over looked till it goes down the track and then people sit up and take notice.
A stock stroke 360, internal balance, KB 107's, Sir rods, Hughes ported E-brock heads, M1 single plane, Holley DP750, MP 557 cam, Hughes 1.6 rockers, 5000 stall PTC converter, John Cope race built 904, Cal-Tracks w/mono leaf springs, 8 3/4, choice of 4.88/4.56 gears, Hoosier 28x9 slicks, 3030 lbs with me in it.
Best 1/4 mile time is 11.10@ 120 mph, best 1/8 mile time is 6.94, best 60ft is 1.455.
10 years building and less than ten grand invested.
|
|
|
Re: Slow Mopars
[Re: JBurch]
#1153003
01/10/12 08:55 PM
01/10/12 08:55 PM
|
Joined: Jan 2003
Posts: 1,142 Central New York
slippery440
OP
Crybaby440
|
OP
Crybaby440
Joined: Jan 2003
Posts: 1,142
Central New York
|
Quote:
Vic, I gotta tell you, my Junk 65 Barracuda, is Junkier than yours!!!!!!!!!!!!!
It's not as rough as it was when I got it; it doesn't have a Fred Flintstone floor pan any more, nor do the quarters have holes you can put your head thru. It's flat black, pained with a brush, I embrace it's crudeness!! It's over looked till it goes down the track and then people sit up and take notice.
A stock stroke 360, internal balance, KB 107's, Sir rods, Hughes ported E-brock heads, M1 single plane, Holley DP750, MP 557 cam, Hughes 1.6 rockers, 5000 stall PTC converter, John Cope race built 904, Cal-Tracks w/mono leaf springs, 8 3/4, choice of 4.88/4.56 gears, Hoosier 28x9 slicks, 3030 lbs with me in it.
Best 1/4 mile time is 11.10@ 120 mph, best 1/8 mile time is 6.94, best 60ft is 1.455.
10 years building and less than ten grand invested.
Jim anytime you say that it not true. You have one of the most look at cars down there. Anyone can own a Dart but how many 65 Cudas do we see? That car just runs great.
If the MODS did their job I would not be hitting the notify MOD button. LOL
|
|
|
Re: Slow Mopars
[Re: slippery440]
#1153004
01/10/12 09:56 PM
01/10/12 09:56 PM
|
Joined: May 2004
Posts: 83 Columbus, Ohio
JLC
member
|
member
Joined: May 2004
Posts: 83
Columbus, Ohio
|
64 Polara 500, 440.030, cam .572 .579, 440 source heads, Mopar crossram intake, 4.30 gears,ss springs, 12.00 @ 114.52. all steel weight ?.
Last edited by JLC; 01/10/12 10:00 PM.
|
|
|
Re: Slow Mopars
[Re: JLC]
#1153005
01/11/12 02:15 AM
01/11/12 02:15 AM
|
Joined: Jul 2005
Posts: 336 Creston, Iowa
340man4ever
enthusiast
|
enthusiast
Joined: Jul 2005
Posts: 336
Creston, Iowa
|
Keep em coming....... But in the theme of the original poster: Budget minded and stock stroke combos!
Last edited by 340man4ever; 01/11/12 02:25 AM.
Curator at Adams County Speed Shop
|
|
|
Re: Slow Mopars
[Re: challengermike]
#1153008
01/11/12 11:15 PM
01/11/12 11:15 PM
|
Joined: Mar 2007
Posts: 1,608 Rudolph, Ohio
moparguy7074
top fuel
|
top fuel
Joined: Mar 2007
Posts: 1,608
Rudolph, Ohio
|
Here's the details of mine. 360 block .030 over with kb 107's, cast crank, stock rods. Unported edelbrock rpms, 525 comp solid cam, rpm air gap intake. 750 hp holley on e-85. Has run a best of 7.13@94 in the 1/8. Super stock springs in stock location, stock wheel tubs, 83/4 with 4.30 gears and spool.
|
|
|
Re: Slow Mopars
[Re: slippery440]
#1153011
01/12/12 12:36 PM
01/12/12 12:36 PM
|
Joined: Oct 2003
Posts: 11,702 W. Kentucky
justinp61
I Live Here
|
I Live Here
Joined: Oct 2003
Posts: 11,702
W. Kentucky
|
Quote:
With all the fastes this or that post and who has the fastes this or that. I want to see stock blocks / stock stroke crankshaft / no power adders at all. This means carburator only.
My 69 Dart with a 340 ran 7.24 @ 94 mph with a 1.54 60'. It weighed 3240# with me in it.
.030 over, Ross flat tops, ported Edlebrocks, 11.2-1 compression, Weiand X-Cellerator, Hughes hydraulic cam and Hughes rockers, 727, 8 3/4 with 4.30s. Full interior, heater, wipers and radio that doesn't work. It ran on pump 93 and could be driven anywhere and not run hot.
The 408 picked up a bit .
|
|
|
Re: Slow Mopars
[Re: justinp61]
#1153012
01/12/12 07:19 PM
01/12/12 07:19 PM
|
Joined: May 2004
Posts: 3,210 robin hood country
deaks
master
|
master
Joined: May 2004
Posts: 3,210
robin hood country
|
I have a budget i dont like to go over, even though i have the spare cash, so i look for good deals on used and new parts and try and glean as much info off the net and other people's experiences as i can. The advice i've had off here as been invaluable in my pursuit of et. My combo Dart GTS 3200#, 440 RB, MCH ported RPM'S,12.5.1 JE domes, .590 cam, isky rockers, victor intake, 950 holley, 727 with 9" Ultimate converter, dana 60 4.56 gears, SS springs, 31x10.5 hoosiers. Bob, what does that Dart weigh ? Mick
69 Dart GTS 440 mopar .590 cam, Edelbrock heads, 3200# best et 6.45, 106.78, 10.14, 132.88 mph, 1.47 60ft best 60ft 1.36
|
|
|
|
|