Previous Thread
Next Thread
Print Thread
Page 3 of 13 1 2 3 4 5 12 13
Re: Pure Stock - Oh the humiliation......... [Re: dvw] #1143614
12/30/11 12:24 PM
12/30/11 12:24 PM
Joined: Jan 2008
Posts: 4,276
Canada
WO23Coronet Offline
master
WO23Coronet  Offline
master

Joined: Jan 2008
Posts: 4,276
Canada
Quote:

My buddy had a original 64 Hemi Belvedere H/T. You are correct it did have Carter carbs. Last I heard the car was in Washington state, It was an automatic, red with a red interior. Supposedly one of six.
Doug




So just to get this straight you could get a 64 Hemi car that was a street car (NOT a RO or WO car) and registerable (if thats a real word)? Is this the same case with the 65 cars? I always thought they were race only.

In my opinion, if you could plate it, it should be allowed. I can see both arguements for the 68 SS cars, yeah they weren't supposed to be registered, but I'm sure alot of them were, there's a CarCraft article from about 2 years ago where a guy was driving one on the street with one of there editors (they took it for ice cream and made a kid cry with it). As a matter of fact, didn't one go on the PowerTour or Drag Week? But, they did make more of them that the ZL-1 or L88 cars, and probably the COPO cars, which are nothing more than factory race cars, LIKE THE 68SS cars. So I can see both sides.

If the reason they don't want the 64 HEMI cars in Pure Stock is because they have headers (which is BS cause they are actually a cast manifold, although a really good one) BOO HOO. ZL1's have aluminum blocks, L89 have aluminum heads and Holly carbs. Hell, Studebaker Larks have superchargers for heavens sake. It seemed to me that the organizations that put on these type of events, FAST and Pure Stock, were unbiased towards one brand or another, but it seems that the old Mopar bias is creeping in.

Re: Pure Stock - Oh the humiliation......... [Re: WO23Coronet] #1143615
12/30/11 12:52 PM
12/30/11 12:52 PM
Joined: Nov 2003
Posts: 5,160
Texas
dannysbee Offline
master
dannysbee  Offline
master

Joined: Nov 2003
Posts: 5,160
Texas
Never have seen any 65's but 64 there were Plymouths and Dodges built with cross ram Hemi's that were not RO or WO cars. Mervin Hughes had Dodge with a 4 speed. There were probably not more than 20 or so built but that is beside the point. They were built on the production line and sold just as any Max Wedge would have been. The steel front end Max Wedge cars are allowed. I guess the GM boys feel justified in their decision as they don't let the Z-11 63 427 cars run or the ZL1 corvette (2 built) run.


Getting old just means you were smarter than some and luckier than others.
Re: Pure Stock - Oh the humiliation......... [Re: dannysbee] #1143616
12/30/11 01:01 PM
12/30/11 01:01 PM
Joined: Mar 2006
Posts: 10,032
MI, usa
dvw Offline
I Live Here
dvw  Offline
I Live Here

Joined: Mar 2006
Posts: 10,032
MI, usa
Quote:

Never have seen any 65's but 64 there were Plymouths and Dodges built with cross ram Hemi's that were not RO or WO cars. Mervin Hughes had Dodge with a 4 speed. There were probably not more than 20 or so built but that is beside the point. They were built on the production line and sold just as any Max Wedge would have been. The steel front end Max Wedge cars are allowed. I guess the GM boys feel justified in their decision as they don't let the Z-11 63 427 cars run or the ZL1 corvette (2 built) run.




This was exactly what his car was. Street production 64 Hemi.
Doug

Re: Pure Stock - Oh the humiliation......... [Re: dannysbee] #1143617
12/30/11 01:13 PM
12/30/11 01:13 PM
Joined: Dec 2005
Posts: 1,495
Shelby mi.
J
JAKE68 Offline
pro stock
JAKE68  Offline
pro stock
J

Joined: Dec 2005
Posts: 1,495
Shelby mi.
The reason you do not see the 64/65/68 high compresion hemis in those classes is because they were not designated street cars. They were perpose built super stock cars. Yes some states you could get them titled back in the day. Today it is easier to plate them ( eg Steve Atwels ss car in drag week).Production numbers are higher than the copo cars but the copo cars where not super stock purpose cars. They came with titles and warrenty. When you look at how these cars were equiped back then they all had some great stuff to make the hp-weight very good and very competetive. So really it boils down to engine builders to maximise that combo. So looking at that it should be very competive between gm copo cars,chrysler hemi cars, ford 427hi rise cars. So I say let the racing begin and may the best engine builders show their stuff. Jake

Last edited by JAKE68; 12/30/11 01:15 PM.

JAKES AUTOMOTIVE
Re: Pure Stock - Oh the humiliation......... [Re: JAKE68] #1143618
12/30/11 01:19 PM
12/30/11 01:19 PM
Joined: Dec 2005
Posts: 1,495
Shelby mi.
J
JAKE68 Offline
pro stock
JAKE68  Offline
pro stock
J

Joined: Dec 2005
Posts: 1,495
Shelby mi.
Also looking at the car that Doug is talking about I tried to do clone like that and was told I could not compete in the pure stock for a couple of reasons, one being they could not get the exact cam specs that the low compresion cars had, the cast,steel headers, and the production numbers, as they only made 11 hardtop cars. jake


JAKES AUTOMOTIVE
Re: Pure Stock - Oh the humiliation......... [Re: JAKE68] #1143619
12/30/11 01:37 PM
12/30/11 01:37 PM
Joined: Nov 2003
Posts: 5,160
Texas
dannysbee Offline
master
dannysbee  Offline
master

Joined: Nov 2003
Posts: 5,160
Texas
I did not know the production #. I know I have seen several over the years. I would venture to say that all of those cars were titled and driven. They would not be any more of a ringer than a L88 Corvette with 12.5 to 1 compression and L88 specs:
.540/.560 lift
334/364 duration.

Or a ZL1 Camaro with 12.5 compression and ZL-1 specs:
.560/.600 lift
347/359 duration

Last edited by dannysbee; 12/30/11 01:49 PM.

Getting old just means you were smarter than some and luckier than others.
Re: Pure Stock - Oh the humiliation......... [Re: jamesc] #1143620
12/30/11 01:42 PM
12/30/11 01:42 PM
Joined: Oct 2004
Posts: 8,166
Left Coast
B
BobR Offline
master
BobR  Offline
master
B

Joined: Oct 2004
Posts: 8,166
Left Coast
Quote:

Quote:

They have smallblock heads that will outflow a B1 with ease.




GM has hoards of better options for parts than mopar but i think that one's a stretch




Our SBF flowed 410 on the intake side.

Re: Pure Stock - Oh the humiliation......... [Re: BobR] #1143621
12/30/11 03:16 PM
12/30/11 03:16 PM
Joined: Jan 2003
Posts: 27,421
Balt. Md
3
383man Offline
Too Many Posts
383man  Offline
Too Many Posts
3

Joined: Jan 2003
Posts: 27,421
Balt. Md
I have read the article about a guy named "Ferguson" that ordered a 64 Max Wedge car but he ended up getting a Hemi car as the Maxie's went out of production. Also says he tagged the car and drove it home to save the $13.50 shipping fee. So 64's could be tagged but 65 and 68 SS cars could not as far as I know. As for the wild headers on the 64 Hemi cars I say so what ? Thats the way they made them and they had a full exh. I just wonder if it is legal to open the cutouts on the 62 and 63 Max Wedge cars in pure stock ? I mean they were there for that reason ? Ron

Re: Pure Stock - Oh the humiliation......... [Re: 383man] #1143622
12/30/11 08:52 PM
12/30/11 08:52 PM
Joined: Jan 2003
Posts: 42,714
Spokane Washington
ScottSmith_Harms Offline
Mr Wizzard
ScottSmith_Harms  Offline
Mr Wizzard

Joined: Jan 2003
Posts: 42,714
Spokane Washington
This car was ordered new, licensed and legally driven from day one on the street as a regular car. It came from the factory with the Cross Ram Race Hemi and the cast iron/tube combo exhaust manifolds. The manifolds carried a casting number and while they look like headers to most, were installed on every one of these cars on the factory production line, not an optional aftermarket part tossed in the trunk or added at a dealer. It's currently owned by a Moparts member to boot!

6992733-Blue64Hemi2.jpg (151 downloads)
Re: Pure Stock - Oh the humiliation......... [Re: ScottSmith_Harms] #1143623
12/30/11 08:52 PM
12/30/11 08:52 PM
Joined: Jan 2003
Posts: 42,714
Spokane Washington
ScottSmith_Harms Offline
Mr Wizzard
ScottSmith_Harms  Offline
Mr Wizzard

Joined: Jan 2003
Posts: 42,714
Spokane Washington
2

6992735-Blue64Hemi.jpg (150 downloads)
Re: Pure Stock - Oh the humiliation......... [Re: ScottSmith_Harms] #1143624
12/30/11 08:53 PM
12/30/11 08:53 PM
Joined: Jan 2003
Posts: 42,714
Spokane Washington
ScottSmith_Harms Offline
Mr Wizzard
ScottSmith_Harms  Offline
Mr Wizzard

Joined: Jan 2003
Posts: 42,714
Spokane Washington
100% bone stock factory

Re: Pure Stock - Oh the humiliation......... [Re: ScottSmith_Harms] #1143625
12/30/11 08:54 PM
12/30/11 08:54 PM
Joined: Jan 2003
Posts: 42,714
Spokane Washington
ScottSmith_Harms Offline
Mr Wizzard
ScottSmith_Harms  Offline
Mr Wizzard

Joined: Jan 2003
Posts: 42,714
Spokane Washington
Here's the other car mentioned here in Washington, Mr. Brundage's car.

Re: Pure Stock - Oh the humiliation......... [Re: ScottSmith_Harms] #1143626
12/30/11 08:55 PM
12/30/11 08:55 PM
Joined: Jan 2003
Posts: 42,714
Spokane Washington
ScottSmith_Harms Offline
Mr Wizzard
ScottSmith_Harms  Offline
Mr Wizzard

Joined: Jan 2003
Posts: 42,714
Spokane Washington
Engine

Re: Pure Stock - Oh the humiliation......... [Re: ScottSmith_Harms] #1143627
12/30/11 09:00 PM
12/30/11 09:00 PM
Joined: Jan 2003
Posts: 42,714
Spokane Washington
ScottSmith_Harms Offline
Mr Wizzard
ScottSmith_Harms  Offline
Mr Wizzard

Joined: Jan 2003
Posts: 42,714
Spokane Washington
Manifolds

Re: Pure Stock - Oh the humiliation......... [Re: ScottSmith_Harms] #1143628
12/30/11 09:01 PM
12/30/11 09:01 PM
Joined: Jan 2003
Posts: 42,714
Spokane Washington
ScottSmith_Harms Offline
Mr Wizzard
ScottSmith_Harms  Offline
Mr Wizzard

Joined: Jan 2003
Posts: 42,714
Spokane Washington
Casting number on flange

Re: Pure Stock - Oh the humiliation......... [Re: ScottSmith_Harms] #1143629
12/30/11 09:19 PM
12/30/11 09:19 PM
Joined: Nov 2003
Posts: 5,160
Texas
dannysbee Offline
master
dannysbee  Offline
master

Joined: Nov 2003
Posts: 5,160
Texas
No good reason why those cars cannot run Pure stock in my opinion.


Getting old just means you were smarter than some and luckier than others.
Re: Pure Stock - Oh the humiliation......... [Re: Moparmal] #1143630
12/30/11 09:34 PM
12/30/11 09:34 PM
Joined: Nov 2010
Posts: 3,698
jersey
S
Spaceman Spiff Offline
master
Spaceman Spiff  Offline
master
S

Joined: Nov 2010
Posts: 3,698
jersey
Quote:

Quote:

Quote:

Heck they built more 68 SS Hemi Darts and Cuda's (about 150) then GM built of the ZL1's which was about 69 I believe.


Also, IIRC only 20 some L88 engines where placed into Vettes in 67.




L88 is not a ZL1. L88 was an iron block, ZL1 was all alloy.

My point is about production #s - less ZL1s made than the HURST SS cars - yet the MOPARS are banned...since when were they not a production car?






Since when is HURST a Chrysler corp production line?
ZL-1's Copo's and l-88 were made on regular GM assembly lines, not sent to a separate corporation to be put together.

Are the boss 429 mustangs allowed? They weren't production cars, they were sent to Kar Kraft for assembly.


526 cubes of angry wedge, pushbutton shifted, 9 passenger killer!
Re: Pure Stock - Oh the humiliation......... [Re: Moparmal] #1143631
12/30/11 10:33 PM
12/30/11 10:33 PM
Joined: Dec 2005
Posts: 722
Hampstead, MD.
Troublemaker427 Offline
super stock
Troublemaker427  Offline
super stock

Joined: Dec 2005
Posts: 722
Hampstead, MD.
T-bolts did run Super Stock in 1964 on 7" tires. They ran AFX when on 10" tires. There were 100 Thunderbolts built. Gas Ronda won the 1964 NHRA "World Top Stock Eliminator" title while running SS.

In my opinion a as built Thunderbolt along with an as built '68 Hemi Cuda & Dart should be legal for Pure Stock along with the '64-'65 Race Hemi cars.

Also I'm pretty sure as delivered from Dearborn Steel Tubing the Thunderbolts were faster then the Hurst built '68 Cudas & Darts if you want to compare apples to apples. From what I read the "stock" Hemi cars had some issues. Once they were blue printed and set up by the racers the Hemi cars may have the edge but it still was very close.

As delivered in late '63 a "stock" Thunderbolt would run 12.20's @ 120+. By the end of '64 some of the good running T-bolts were in the high 10's on 10" tires.

No matter what I'd like to see them all run Pure Stock.

Quote:

Thank you Joel - thats the answer I was looking for .

In fact, I had an argument with some clown on one of the Vids about the SS Darts - somehow they reckon the SS Dart isn't a "mass produced" car!

So I say "what? did the stork lay them? " Or were they assembled in a Factory?

....Next thing...he's claiming the T Bolt was faster than the SS Darts...... What an IDIOT!!

The T Bolt ran AFX, the SS Darts were SS!

Typical Chev owner.




Jody Aberts 1966 Fairlane 427 Troublemaker2 AA/NSS 1964 Galaxie 500XL 390-4spd. 1966 F-100 390-C6 1967 Plymouth VIP 383-TF 2003 Roadking
Re: Pure Stock - Oh the humiliation......... [Re: Troublemaker427] #1143632
12/30/11 10:40 PM
12/30/11 10:40 PM
Joined: Jan 2008
Posts: 4,276
Canada
WO23Coronet Offline
master
WO23Coronet  Offline
master

Joined: Jan 2008
Posts: 4,276
Canada
Quote:

T-bolts did run Super Stock in 1964 on 7" tires. They ran AFX when on 10" tires. There were 100 Thunderbolts built. Gas Ronda won the 1964 NHRA "World Top Stock Eliminator" title while running SS.

In my opinion a as built Thunderbolt along with an as built '68 Hemi Cuda & Dart should be legal for Pure Stock along with the '64-'65 Race Hemi cars.

Also I'm pretty sure as delivered from Dearborn Steel Tubing the Thunderbolts were faster then the Hurst built '68 Cudas & Darts if you want to compare apples to apples. From what I read the "stock" Hemi cars had some issues. Once they were blue printed and set up by the racers the Hemi cars may have the edge but it still was very close.

As delivered in late '63 a "stock" Thunderbolt would run 12.20's @ 120+. By the end of '64 some of the good running T-bolts were in the high 10's on 10" tires.

No matter what I'd like to see them all run Pure Stock.

Quote:

Thank you Joel - thats the answer I was looking for .

In fact, I had an argument with some clown on one of the Vids about the SS Darts - somehow they reckon the SS Dart isn't a "mass produced" car!

So I say "what? did the stork lay them? " Or were they assembled in a Factory?

....Next thing...he's claiming the T Bolt was faster than the SS Darts...... What an IDIOT!!

The T Bolt ran AFX, the SS Darts were SS!

Typical Chev owner.








I'll give you that one, where you compare the 64 T-Bolts with the 68 SS cars, neither were built in house, and neither should be allowed, BUT you can't throw the 64 HEMI'S in with them as they were assembled on a factory line

Re: Pure Stock - Oh the humiliation......... [Re: WO23Coronet] #1143633
12/30/11 10:53 PM
12/30/11 10:53 PM
Joined: Dec 2005
Posts: 722
Hampstead, MD.
Troublemaker427 Offline
super stock
Troublemaker427  Offline
super stock

Joined: Dec 2005
Posts: 722
Hampstead, MD.
Ok, if coming down an assembly line is the criteria used to determine what is allowed to run then I agree. But, I would be more conserned about production numbers. They built 100 T-bolts and I believe only 69 ZL-1 Camaros. I'm not sure of the production numbers for the '64 Race Hemi but I would imagine less then 100? How about L-88 Corvettes?

If built on an assembly line is the criteria then a '63 & '64 lightweight Galaxie should be legal. They were built on the line. Are they, I'm not sure?

I'd still like to see "pure stock" versions of these "factory race cars" compete even if they had their own class. AFX/Pure Stock ??? Make them run on a spec 7" cheater slick. What do you all think?


Jody Aberts 1966 Fairlane 427 Troublemaker2 AA/NSS 1964 Galaxie 500XL 390-4spd. 1966 F-100 390-C6 1967 Plymouth VIP 383-TF 2003 Roadking
Page 3 of 13 1 2 3 4 5 12 13






Powered by UBB.threads™ PHP Forum Software 7.7.1